Environmental Effects on the Predicted Service Life of Flexible Pavements
Publication: Journal of Transportation Engineering
Volume 133, Issue 1
Abstract
Mechanistic-empirical pavement design methods for flexible pavements are based on the assumption that pavement life is inversely related to the magnitude of the traffic-induced pavement strains. These strains vary with the stiffness of various pavement layers. The stiffness of the asphalt varies with temperature and the stiffness of the unbound base and subgrade materials varies with water content. Because these relationships are nonlinear, the additional pavement life consumed by wheel loads at higher-than-average temperatures or water contents is not offset by savings at lower-than-average temperatures or water contents. Furthermore, the temperature and moisture effects cannot be considered separately and superimposed, they must be considered together. In this paper, seasonal temperature and water content variations observed at instrumented pavement sites in Tennessee are idealized and the combined effects of these seasonal changes on predicted pavement life are evaluated for three typical pavement profiles. The results of the parametric study show that the temperature averaging period, the temperature gradient in the asphalt, and the timing and duration of wet base and subgrade conditions all affect the estimation of pavement life.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers appreciate the financial support provided by the Tennessee Department of Transportation, Design Division and Materials and Tests Division.
References
American Association of State Highway Officials AASHTO. (1993). AASHTO Guide for the Design of Pavement Structures, Washington, D.C., 403.
ABAQUS 6.2-1. (2001). Hibbitt, Karlsson & Sorensen, Inc., R.I.
Asphalt Institute. (1982). Research and Development of the Asphalt Institute’s Thickness Design Manual (MS-1). Report 82-2, Lexington, Ky.
Carmichael III, R. F. and Stuart, E. (1985). “Predicting resilient modulus: A study to determine the mechanical properties of subgrade soils.” Transportation Research Record 1043, TRB, Transportation Research Board, National Research Council, Washington D.C., 145–148.
Cumberledge, G., Hoffman, G. L., Bhajandas, A. C. and Cominsky, R. J. (1974). “Moisture variation in highway subgrades and the associated change in surface deflections.” Transportation Research Record. 497, Transportation Research Board, Washington, D.C., 40–49.
Drumm, E. C., Reeves, J. S., Madgett, M. R., and Trolinger, W. D. (1997). “Subgrade resilient modulus correction for saturation effects.” J. Geotech. Geoenviron. Eng., 123(7), 663–670.
Hjelmstad, K. D. and Taciroglu, E. (2000). “Analysis and implementation of resilient modulus models for granular solids.” J. Eng. Mech., 126(8) 821–830.
Hwang, D. and Witczak, M. W. (1979). Program DAMA (Chevron), User’s Manual, Dept. of Civil Engineering, Univ. of Maryland, College Park, Md.
Jin, M. S., Lee, K. W., and Kovacs, W. D. (1994). “Seasonal variation of resilient modulus of subgrade soils.” J. Transp. Eng., 120(4) 603–616.
Marshall, C., Meier, R. W., and Welsh, M. (2001). “Seasonal temperature effects on flexible pavements in Tennessee.” Transportation Research Record. 1764, Transportation Research Board, Washington, D.C., 89–96.
Matter, N. S. and Farouki, O. T. (1994). “Detailed study on the climatic and seasonal variation effects on pavements in Northern Ireland.” Proc., 4th Int. Conf. on the Bearing Capacity of Roads and Airfields, Minneapolis,721–737.
Raad, L., Minassian, G. H., and Gartin, S. (1992). “Characterization of saturated granular base under repeated loads.” Transportation Research Record. 1369, Transportation Research Board, Washington, D.C., 73–82.
Rada, G. and Witczak, M. W. (1981). “Comprehensive evaluation of laboratory resilient moduli results for granular material.” Transportation Research Record. 810, Transportation Research Board, Washington, D.C., 23–33.
Rainwater, N. R., Yoder, R. E., Drumm, E. C., and Wilson, G. V. (1999). “Comprehensive monitoring systems for measuring subgrade moisture conditions.” J. Transp. Eng., 125(5) 439–448.
Tian, P., Zaman, M. M., and Laguros, J. G. (1998). “Gradation and moisture effects on resilient moduli of aggregate bases.” Transportation Research Record. 1619, Transportation Research Board, Washington, D.C., 75–84.
Uzan, J. (1992). “Resilient characterization of pavement materials.” Int. J. Numer. Analyt. Meth. Geomech., 16(6), 435–459.
Uzan, J., Witczak, M. W., Scullion, T., and Lytton, R. L. (1992). “Development and validation of realistic pavement response modes.” Proc., 7th Int. Conf. on Asphalt Pavements, International Society for Asphalt Pavements, Austin, Tex. 334–350.
Zuo, G. (2003). “Impacts of environmental factors on flexible pavements, dissertation presented in partial fulfillment of the requirements for doctor of philosophy degree.” Univ. of Tennessee, Knoxville, Tenn. 248.
Zuo, G., Meier, R. W., and Drumm, E. C. (2002). “The effect of temperature averaging on predicted pavement life.” Transportation Research Record. 1809. Transportation Research Board, Washington, D.C., 119–125.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 133 • Issue 1 • January 2007
Pages: 47 - 56
Copyright
© 2007 ASCE.
History
Received: Dec 23, 2003
Accepted: Dec 7, 2004
Published online: Jan 1, 2007
Published in print: Jan 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.