Determining Layer Contributions to Rutting by Surface Profile Analysis
Publication: Journal of Transportation Engineering
Volume 131, Issue 2
Abstract
For years researchers and practitioners alike in the pavements and materials industry have been performing forensic analyses to determine the origin of hot-mix asphalt pavement permanent deformation (rutting) failures. The investigations typically involve traffic control, coring, excavation, and significant materials testing. These investigations are costly and very inconvenient for road users. Although expensive and inconvenient the investigations are necessary in order to plan appropriate rehabilitation activities. Under the National Cooperative Highway Research Program Project 1-34A, a method has been developed to determine the relative contributions of structural layers to total rutting in flexible pavements from a simple analysis of a pavement’s transverse surface profile. A recommended test method in standard format was developed that provides the industry with an extremely valuable analytical tool that could eliminate the need for expensive and inconvenient forensic analyses in many cases.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to acknowledge the National Cooperative Highway Research Program for funding the study. Additionally, a number of agencies provided resources and data for the project and the research team members appreciate their assistance. A field study of this type would not be possible without such support.
References
American Association of State Highway and Transportation Officials (AASHTO. (1993). AASHTO guide for design of pavement structures, Washington, D.C.
Association of State Highway and Transportation Officials and Federal Highway Administration (AASHTO/FHWA (1987). A Symposium/Workshop on High Pressure Truck Tires, American Austin, Tex.
Brown, E. R., and Cross, S. A. (1989). “A study of in place rutting of asphalt pavements.” J. Assoc. Asphalt Paving Technologists, 58, 1–39.
Brown, E. R., and Cross, S. A. (1992a). “A national study of rutting in hot mix asphalt (HMA) pavements.” NCAT Rep. No. 92-5, National Center for Asphalt Technology, Auburn, Ala.
Brown, E. R., and Cross, S. A. (1992b). “A national study of rutting in hot mix asphalt (HMA) pavements.” J. Assoc. Asphalt Paving Technologists, 61, 535–582.
Dawley, C. B., Hogewiede, B. L., and Anderson, K. O., (1990). “Mitigation of instability rutting of asphalt concrete pavements in Lethbridge, Alberta, Canada.” J. Assoc. Asphalt Paving Technologists, 59, 481–508.
Gramling, W. L., Hunt, J. E., and Suzuki, G. (1991). “Rational approach to cross-profile and rut depth analysis.” Transportation Research Record 1311, Transportation Research Board, National Research Council, Washington, D.C., 173–179.
Hua, J. (2000). “Finite element modeling and analysis of accelerated pavement testing devices and phenomenon.” Thesis, Purdue Univ., West Lafayette, Ind.
Lenngren, C. A. (1988). “Some approaches in treating automatically collected data on rutting.” Transportation Research Record 1196, Transportation Research Board, National Research Council, Washington, D.C., 20–26.
Mahboub, K., Simpson, A., Oduroh, P., and Fleckenstein, J. (1992). “Field performance of large-stone hot mix asphalt on a Kentucky coal haul road.” Transportation Research Record 1337, Transportation Research Board, National Research Council, Washington, D.C., 71–78.
Middleton, D. R., Roberts, F. L., and Chira-Chavala, T. (1986). “Measurements and analysis of truck tire pressures on Texas highways.” Transportation Research Record 1070, Transportation Research Board, National Research Council, Washington, D.C., 1–8.
Oteng-Seifah, S., and Manke, P. G. (1976). “Study of rutting in flexible highway pavements in Oklahoma.” Transportation Research Record 602, Transportation Research Board, National Research Council, Washington, D.C., 97–99.
Simpson, A. (1999). “Characterization of transverse profile.” Transportation Research Record 1655, Transportation Research Board, National Research Council, Washington, D.C., 185–191.
Simpson, A. L., Daleiden, J. F., and Hadley, W. O. (1995). “Rutting analysis from a different perspective.” Transportation Research Record 1473, Transportation Research Board, National Research Council, Washington, D.C., 9–17.
White, T. D., Fang, H., and Haddock, J. E. (2002a). “Flexible pavement layer failure.” 3D Finite Element for Pavement Analysis, Design, and Research, Third Int. Symp., Amsterdam, The Netherlands.
White, T. D., Haddock, J. E., Hand, A. J. T., and Fang, H. (2002b). “Contributions of pavement structural layers to rutting of hot mix asphalt pavements.” NCHRP Rep. 468, National Cooperative Highway Research Program, Transportation Research Board, National Research Council, National Academy Press, Washington, D.C.
Witczak, M. W., Von Quintas, H., and Schwartz, C. W. (1997). “Superpave support and performance models management: Evaluation of the SHRP performance models system.” Proc., Eighth Int. Conf. on Asphalt Pavements, Vol. III, 175–195.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jun 5, 2003
Accepted: Apr 15, 2004
Published online: Feb 1, 2005
Published in print: Feb 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.