Effect of Stress-Dependent Modulus and Poisson’s Ratio on Structural Responses in Thin Asphalt Pavements
Publication: Journal of Transportation Engineering
Volume 130, Issue 3
Abstract
Most low-volume roads are primarily thin flexible pavements with an unbound base and subgrades. This is especially true for the behavior of unbound pavement materials, which is very nonlinear and stress dependent, even at low traffic stresses. A need therefore exists for more realistic prediction of pavement response for such pavements, based on proper constitutive models and computational methods. For this reason, the nonlinear, stress-dependent finite-element program for pavement analysis was developed. Stress-dependent models for the resilient modulus and Poisson’s ratio of unbound pavement materials are incorporated into the finite-element model to predict the resilient behavior within the pavement layers under specified wheel loads. The results of this study show that the developed finite-element model with stress dependency is suitable for calculating a reduced horizontal tension in the bottom half of unbound aggregate base layers. Unlike conventional methods for correcting horizontal tension, compressive stresses can be obtained only by the use of proper constitutive material models and the finite-element approach. It is also noted that the effects of nonlinearity and the varying stress-dependent modulus and Poisson’s ratio, especially in the base layers, could be substantial, and the proper selection of material properties is very important to improve the prediction of those behaviors.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allen, J. J. (1973). “The effects of non-constant lateral pressures on resilient response of granular materials.” PhD dissertation, Univ. of Illinois at Urbana-Champaign, Ill.
Asphalt Institute. (1991). “Thickness design—Asphalt pavements for highways and streets.” Manual series no. 1., Asphalt Institute, Lexington, Ky.
Brown, S. F.(1996). “Soil mechanics in pavement engineering.” Geotechnique, 46(3), 383–426.
Brown, S. F., and Pappin, J. W. (1981). “Analysis of pavements with granular bases.” Transportation Research Record 810, Transportation Research Board, National Research Council, Washington, D.C., 17–23.
Crockford, W. W., Bendana, L. J., Yang, W. S., Rhee, S. K., and Senadheera, S. P. (1990). “Modeling stress and strain states in pavement structures incorporating thick granular layers.” Final Rep., Texas Transportation Institute, College Station, Texas.
Doddihal, S. R., and Pandey, B. B. (1984). “Stresses in full depth granular pavements.” Transportation Research Record 954, Transportation Research Board, Washington, D.C., 94–100.
Harichandran, R. S., Yeh, M. S., and Balidi, G. Y. (1989). “MICH-PAVE user’s manual,” Final Rep. FHWA-MI-RD-89-032, Dept. of Civil and Environmental Engineering, Michigan State Univ., East Lansing, Mich.
Hicks, R. G., and Monismith, C. L. (1971). “Factors influencing the resilient properties of granular material.” Transportation Research Record 345, Transportation Research Board, Washington, D.C., 15–31.
Huang, Y. H. (1993). Pavement analysis and design, 1st Ed., Prentice-Hall, Englewood Cliffs, N.J.
Jooste, F. J., and Fernando, E. G. (1995). “Development of a procedure for the structural evaluation of superheavy loads routes.” Research Rep. 1335-3F, Texas Transportation Institute, College Station, Texas.
Lade, P. V., and Nelson, R. D. (1987). “Modelling the elastic behavior of granular materials.” Int. J. Numer. Analyt. Methods Geomech., 11(5), 521–542.
Liu, M. (1993). “Numerical prediction of pavement distress with geotechnical constitutive laws.” PhD dissertation, Texas A&M Univ., College Station, Texas.
Lourens, J. P. (1989). “The non-linear stress-strain behavior of foundation materials, structures and their interaction.” PhD dissertation, Univ. of Pretoria, Pretoria, South Africa.
Lytton, R. L. (1996). “System design of pavements.” Course Notes, Texas A&M Univ., College Station, Tex.
Lytton, R. L., Uzan, J., Fernando, E., Roque, R., Hiltunen, D., and Stoffels, S. M. (1993). “Development and validation of performance prediction models and specifications for asphalt binders and paving mixes.” SHRP A-357, Strategic Highway Research Program, National Research Council, Washington, D.C.
May, R. W., and Witczak, M. W. (1981). “Effective granular modulus to model pavement.” Transportation Research Record 810, Transportation Research Board, National Research Council, Washington, D.C., 1–9.
Owen, D. R. J., and Hinton, E. (1980). Finite elements in plasticity: Theory and practice, Pineridge, Swansea, U.K.
Park, S. (2000). “Evaluation of accelerated rut development in unbound pavement foundations and load limits on load-zoned pavements.” PhD dissertation, Texas A&M Univ., College Station, Tex.
Raad, L., and Figueroa, J. L.(1980). “Load response of transportation support systems.” J. Transp. Eng., 106(1), 111–128.
Reynolds, O. (1885). “On the dilatancy of media composed of rigid particles in contact: With experimental illustrations.” Philos. Mag. A.
Sweere, G. T. H. (1990). “Unbound granular bases for roads.” PhD dissertation, Technical Univ. of Delft, Delft, The Netherlands.
Titus-Glover, L., and Fernando, E. G. (1995). Evaluation of pavement base and subgrade material properties and test procedures. Research Rep. No. 1335-2, Texas Transportation Institute, Texas A&M Univ., College Station, Tex.
Tutumluer, E. (1995). “Predicting behavior of flexible pavements with granular bases.” PhD dissertation, Georgia Institute of Technology, Atlanta.
Uzan, J. (1985). “Granular material characterization.” Transportation Research Record 1022, Transportation Research Board, Washington, D.C., 52–59.
Uzan, J.(1992). “Resilient characterization of pavement materials.” Int. J. Numer. Analyt. Meth. Geomech., 16(6), 435–459.
Wolff, H., and Visser, A. T. (1994). “Incorporating elasto-plasticity in granular layer pavement design.” Proc., Institution of Civil Engineers, Transport, no. 105, 259–272.
Zienkiewicz, O. C., Valliappan, S., and King, I. P.(1968). “Stress analysis of rock as a no-tension material.” Geotechnique, 18(2), 56–66.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Apr 16, 2002
Accepted: Aug 23, 2002
Published online: Apr 15, 2004
Published in print: May 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.