Analytical Model to Determine the Influence of Horizontal Alignment of Two-Axle Heavy Vehicles on Upgrades
Publication: Journal of Transportation Engineering
Volume 129, Issue 6
Abstract
Existing design policies determine the speed variation of vehicles on upgrades solely as a function of specific values: initial speed, grade, and weight to power ratio. This paper establishes a dynamic model that considers in addition the influence of the roadway’s horizontal alignment. The model was validated on both tangents (using existing speed-distance profiles and similar simulation models) and curves (by an existing simulation model and field measurements). The model output was examined on a roadway alignment. It was found that sharp horizontal curves influence the speed of heavy vehicles significantly on mild upgrades. Therefore the conventional speed profile determination has to be supplemented by incorporating the horizontal alignment as well. The proposed model can be used to provide solutions in a more efficient and realistic way than does the current practice.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2001). A policy on geometric design of highways and streets, Washington, D.C.
Carsim Software. (1998). Mechanical Simulation Corp., Univ. of Michigan Transportation Research Institute, Ann Arbor, Mich.
Dixon, J. C. (1996). Tires, suspension and handling, 2nd Ed., Society of Automotive Engineers, Warrendale, Pa.
Edwards, C. H., Jr., and Penney, D. E. (1996). Differential equations and boundary value problems: Computing and modeling, Prentice-Hall, Upper Saddle River, N.J.
Federal Highway Administration (FHWA). (1989). “New methods for determining requirements for truck-climbing lanes.” Publication No. FHWA-IP-89-022, Office of Implementation, Washington, D.C.
Gillespie, T. D. (1986). “Methods for predicting truck speed loss ongrades.” Final Rep., Univ. of Michigan Transportation Research Institute, Ann Arbor, Mich., for the Federal Highway Administration.
Gillespie, T. D. (1992). “Fundamentals of vehicle dynamics.” Society of Mining Metallurgy and Exploration, Littleton, Colo.
Harwood, D. W., and Mason, M., Jr. (1993). Horizontal curve design for passenger cars and trucks, Transportation Research Board, Washington, D.C.
Harwood, D. W., Mason, J. M., Glauz, W. D., Kulakowski, B. T., and Fitzpatrick, K. (1990). “Truck characteristics for use in highway design and operation.” Publication No. FHWA-rd-89-226, Vols. I, II, U.S. Dept. of Transportation, Federal Highway Administration, August.
Heisler, H. (1993). Advanced vehicle technology, Edward Arnold, London.
Kontaratos, M., Psarianos, B., and Yiotis, A. (1994). “Minimum horizontal curve radius as a function of grade incurred by vehicle motion in driving mode.” Transportation Research Record 1445, Transportation Research Board, National Research Council, Washington, D.C., 96–93.
Krempel, G. (1965). “Experimenteller Beitrag zu Untersuchungen an Kraftfahrzeugreifen.” PhD dissertation, Universität, Karlsruhe, Germany.
Macadam, C. C., Fancher, P. S., and Segal, L. (1985). “Side friction for superelevation on horizontal curves.” Final Technical Rep., DTFH61-85-C-00019, Federal Highway Administration, Washington, D.C., August.
Mavromatis, S., et al. (2000). “Design speed ranges to accommodate a safe highway geometric design for heavy vehicles.” 2nd Int. Symp. on Highway Geometric Design, Transportation Research Board, Washington, D.C.
Rakha, H., Lucic, I., Demarchi, S., Van Aerde, M., and Setti, J. (2001). “Vehicle kinematics model for predicting maximum truck acceleration.” Transportation Research Board, Washington, D.C.
Transportation Research Board (TRB). (2000). “Highway capacity manual.” Special Rep. 209, 3rd Ed. Revised, National Research Council, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Jun 21, 2001
Accepted: Dec 20, 2002
Published online: Oct 15, 2003
Published in print: Nov 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.