Freeway Traffic Flow Rate Measurement: Investigation into Impact of Measurement Time Interval
Publication: Journal of Transportation Engineering
Volume 129, Issue 3
Abstract
Traffic flow rate, the equivalent hourly rate of vehicles passing a point during a given time interval, is a fundamental measure of traffic status that plays a critical role in many aspects of transportation engineering. The time interval used in measuring the flow rate, defined as the measurement interval, is influential in the characteristics of flow rate measures. In fact, the Highway Capacity Manual recommends that transportation engineers use a minimum of 15-min measurement intervals in order to ensure “stable” traffic flow rates. In addition, numerous researchers have commented about the lack of stability of flow rates resulting from short measurement intervals. However, there is not a quantitative understanding of the impacts of short (less than 15 min) measurement intervals on traffic flow rate. This paper presents the results of a study using nearly 30,000 flow rate measurements collected at multiple freeway locations to quantify the impact of measurement interval. It was found that stable freeway flow rates may be calculated using measurement intervals as short as 10 min, and that statistically significant improvements in stability can be achieved by adding 2 min to any measurement interval.
Get full access to this article
View all available purchase options and get full access to this article.
References
Banks, J. H. (1999). “Investigation of some characteristics of congested flow.” Transportation Research Record 1678, Transportation Research Board, Washington, D.C., 128–134.
Carlson, A. B. (1986). Communication systems: An introduction to signals and noise in electrical communications, 3rd Ed., McGraw-Hill, New York.
Hurdle, V. F., Merlo, M. I., and Robertson, D. (1997). “Study of speed-flow relationships on individual freeway lanes.” Transportation Research Record 1591, Transportation Research Board, Washington, D.C., 7–13.
Kerner, B. S. (1999). “Congested traffic flow: Observations and theory.” Transportation Research Record 1678, Transportation Research Board, Washington, D.C., 160–167.
Polus, A., and Shwartzman, Y. (1999). “Flow characteristics at freeway work zones and increased deterrent zones.” Transportation Research Record 1657, Transportation Research Board, Washington, D.C., 18–23.
Transportation Research Board (TRB). (1998). “Highway Capacity Manual.” Transportation Research Circular–Special Rep. 209, National Research Council, Washington, D.C.
Urbanik, T., Hinshaw, W., and Barnes, K. (1991). “Evaluation of high-volume urban Texas freeways.” Transportation Research Record 1320, Transportation Research Board, Washington, D.C., 110–118.
Zhou, M., and Hall, F. L. (1999). “Investigation of speed-flow relationship under congested conditions on a freeway.” Transportation Research Record 1678, Transportation Research Board, Washington, D.C., 64–72.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Mar 5, 2001
Accepted: Mar 25, 2002
Published online: Apr 15, 2003
Published in print: May 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.