General Approach to Payment Adjustments for Flexible Pavements
Publication: Journal of Transportation Engineering
Volume 127, Issue 1
Abstract
The quest for developing a payment adjustment plan for contractors considering several distress indicators simultaneously is hindered by three issues: (1) different measurement units for the distress indicators; (2) possible correlation among those indicators; and (3) variation in each of the indicators. In this study, three procedures are compiled together to cope with the preceding issues. First, normalization of each distress indicator is employed to create a dimensionless indicator. Second, principal components analysis, a multivariate statistical technique, is applied to eliminate the possible correlation among the distress indicators. Finally, through a proposed reliability analysis procedure, the pay factor is determined by the ratio of the reliability of the uncorrelated principal components of the as-built pavement over that of the as-designed pavement. Reliability refers to the level of confidence that exists in the distress indicators, not to exceed a certain limit. The results showed that pay factors based on multiple distress indicators are usually lower than those based on one single indicator when the variation in influencing factors such as asphalt concrete thickness is large.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anderson, D. A., Luhr, D. R., and Antle, C. E. ( 1990). “Framework for development of performance-related specifications for hot mix asphalt concrete.” NCHRP Rep. 332, Transp. Res. Board, National Research Council, Washington, D.C.
2.
Association of American State Highway and Transportation Officials (AASHTO). ( 1993). AASHTO guide for the design of pavement structures, Washington, D.C.
3.
Carey, W. N., and Irick, P. E. ( 1960). The pavement serviceability performance concept, Highway Research Board, Washington, D.C.
4.
Chamberlin, W. P. ( 1995). “Performance-related specifications for highway construction and rehabilitation.” NCHRP Rep. 212, Transp. Res. Board, National Research Council, Washington, D.C.
5.
Chen, D., Lin, H., and Hugo, F. ( 2000). “Application of VESYS3AM in the characterization of permanent deformation.” Int. J. Pavement Engrg., Nottingham, U.K., in press.
6.
Darter, M. I., Hoerner, D. E., Smith, K. D., Okamoto, P. A., and Kopac, P. A. ( 1996). “Development of prototype performance-related specification for concrete pavements.” Transp. Res. Rec. 1544, Transportation Research Board, Washington, D.C., 81–90.
7.
Huang, Y. H. ( 1993). Pavement analysis and design, Prentice-Hall, Englewood Cliffs, N.J.
8.
Johnson, R. A., and Wichern, D. W. ( 1992). Applied multivariate statistical analysis, 3rd Ed., Prentice-Hall, Englewood Cliffs, N.J.
9.
Kenis, W. J. ( 1977). “Predictive design procedures: a design method for flexible pavements using the VESYS structural subsystem.” Proc., 4th Int. Conf. on the Struct. Des. of Asphalt Pavements, 1, 101–147, 1977.
Information & Authors
Information
Published In
History
Received: Mar 10, 1999
Published online: Feb 1, 2001
Published in print: Feb 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.