Prediction of Operating Speed on Three-Dimensional Highway Alignments
Publication: Journal of Transportation Engineering
Volume 127, Issue 1
Abstract
Achieving consistent geometric design is an important goal in highway design to ensure obtaining safe, economical, and smooth traffic operation. Existing operating speed models for design consistency in North America and Europe are mainly based on two-dimensional (2D) analysis of highway horizontal alignments. This paper develops operating speed models for two-lane rural highways that account for the three-dimensional (3D) nature of highways. The models will help highway designers to predict operating speed and evaluate design consistency more accurately, and thus aid highway safety. Two types of 3D combinations were considered: a horizontal curve combined with a sag vertical curve and a horizontal curve combined with a crest vertical curve. Regression analysis was used to develop the operating speed models based on data collected on Highway 61 and Highway 102 in Ontario. The results show that there is a significant difference between the predicted operating speed using the 2D and 3D models. Therefore, it is recommended that the developed 3D models be used in highway consistency analysis and evaluation.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Al-Masaeid, H. R., Hamed, M., Ela, M. A., and Ghannam, A. G. ( 1995). “Consistency of horizontal alignment for different vehicle classes.” Transp. Res. Rec. 1500, Transportation Research Board, National Research Council, Washington, D.C., 178–183.
2.
Gibreel, G. M., Easa, S. M., and El-Dimeery, I. A. ( 1998a). “Review of highway geometric design consistency.” Proc., 1998 Ann. Conf. of Can. Soc. for Civ. Engrg., Second Transportation Specialty Conference, CSCE, Montreal, Quebec, IVa: Design and Management, 325–336.
3.
Gibreel, G. M., Easa, S. M., and El-Dimeery, I. A. ( 1998b). “Prediction of operating speed on 3d highway alignments with sag vertical curves.” Proc., 1998 Ann. Conf. of Can. Soc. for Civ. Engrg., Second Transportation Specialty Conference, CSCE, Montreal, Quebec, IVa: Design and Management, 373–384.
4.
Gibreel, G. M., Easa, S. M., Hassan, Y., and El-Dimeery, I. A. (1999). “State of the art of highway geometric design consistency.”J. Transp. Engrg., ASCE, 125(4), 305–313.
5.
Spec. Rep. 209, HCM, Transportation Research Board, National Research Council, Washington, D.C., 3rd Ed.
6.
Islam, M. N., and Seneviratne, P. N. ( 1994). “Evaluation of design consistency of two-lane highways.” Inst. of Transp. Engrs. J., 64(2), 28–31.
7.
Kanellaidis, G., Golias, J., and Efstathiadis, S. ( 1990). “Driver's speed behaviour on rural road curves.” Traffic Engrg. and Control, London, 31(7/8), 414–415.
8.
Lamm, R., Choueiri, E. M., and Mailaender, T. ( 1990). “Comparison of operating speed on dry and wet pavement of two lane rural highways.” Transp. Res. Rec. 1280, Transportation Research Board, Washington, D.C., 199–207.
9.
Lamm, R., Choueiri, E. M., and Mailaender, T. ( 1992). “Traffic safety on two continents—a ten year analysis of human and vehicular involvements.” Proc., Strategic Hwy. Res. Prog. (SHRP) and Traffic Safety on Two Continents, Gothenburg, Sweden, 18–20.
10.
McFadden, J., and Elefteriadou, L. ( 1997). “Formulation and validation of operating speed-based models using bootstrapping.” Transp. Res. Rec. 1579, Transportation Research Board, Washington, D.C., 97–103.
11.
Poe, C. M., Tarris, J. P., and Mason, J. M., Jr. ( 1966). “Relationship of operating speed to roadway geometric design speed.” Final Rep., FHWA-RD-96-024. Federal Highway Administration, Washington, D.C.
12.
Terlow, J. C. ( 1990). “Transport safety: European co-operation for the 90s.” Lecture on Traffic Safety, City of Westminster, London.
13.
Transportation in Canada: a statistical review, highway network, jurisdiction of public roads. (1995). Transportation Association of Canada (TAC), Ottawa.
Information & Authors
Information
Published In
History
Received: Jan 20, 1999
Published online: Feb 1, 2001
Published in print: Feb 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.