Aspects of Road Safety Audits
Publication: Journal of Transportation Engineering
Volume 125, Issue 6
Abstract
The procedure of road safety audit (RSA), which originated in Great Britain and is now being spread in several countries around the world, can be incorporated in the framework of designing, constructing, and operating road infrastructure as a means for preventing accidents. RSA, which can be applied to both new and existing road facilities, is typically carried out by an independent team consisting of highway engineers and/or traffic safety experts. The present paper focuses on the possibilities for further enhancing the consideration of human factor-related issues in RSA guidelines. This can be achieved through the incorporation of quantitative checks on consistency or driver work load. Such tests can give more weight to the auditors' reasoning. Moreover, the scope is investigated for providing increased opportunities for road user involvement in the RSA process. Public involvement is examined from the aspect of a group's representation, appropriate RSA stages, effective procedures, and responsibility. The possible means and methods for communication between auditors and road users' representatives are also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Austroads. ( 1994). “Road safety audit.” Sydney, Australia.
2.
Austroads. (1998). Proc., Austroads Int. Rd. Safety Audit Forum.
3.
Brackett, R. Q. (1993). “Measurement of driver workload.” Proc., 72nd Annu. Meeting of the Transp. Res. Board.
4.
DOT. ( 1990). “Road safety audits.” Departmental Standard HD 19/90.
5.
Evans, L. (1991). Traffic safety and the driver. Van Nostrand Reinhold, New York.
6.
Gerondeau, C. ( 1991). “Report of the high level expert group for a European policy for road safety.” Commission of the European Communities, Directorate General for Transport.
7.
“Guidelines for the safety audit of highways.” (1996). Institution of Highways and Transportation, London.
8.
Hartgen, D., and Driggers, K. (1993). “Getting to yes in environmental protection.” Proc., 1993 TRB Annu. Meeting.
9.
Highway capacity manual. (1985). Transp. Res. Board Spec. Rep. 209, Transportation Research Board, National Research Council, Washington, D.C.
10.
Hirsh, M. (1987). “Probabilistic approach to consistency in geometric design.”J. Transp. Engrg., ASCE, 113(3), 268–276.
11.
Kanellaidis, G. (1996). “Human factors in highway geometric design.”J. Transp. Engrg., ASCE, 122(1), 59–66.
12.
Kanellaidis, G., and Dimitropoulos, I. (1994). “Subjective and objective evaluation of risk on roadway curves.” Traffic Engrg. and Control, London, 7–8, 451–454.
13.
Kanellaidis, G., Golias, J., and Efstathiadis, S. (1990). “Drivers' speed behavior on rural road curves.” Traffic Engrg. and Control, London, 7.
14.
Krammes, R. A. (1994). “Design speed and operating speed in rural highway alignment design.” Proc., 73rd Annu. Meeting of the Transp. Res. Board.
15.
Lamm, R., Guenther, A. K., and Choueiri, E. M. (1992). “Safety module for highway design—Applied manually or using CAD.” Proc., 71st Annu. Meeting of the Transp. Res. Board.
16.
Lamm, R., Hayward, J. C., and Cargin, J. G. (1986). “Comparison of different procedures for evaluating speed consistency.” Transp. Res. Rec. 1100, Transportation Research Board, Washington, D.C., 10–20.
17.
Leisch, J. E., and Leisch, J. P. (1977). “New concepts in design speed application.” Transp. Res. Rec. 631, Transportation Research Board, Washington, D.C., 4–14.
18.
McLean, J. R. (1981). “Driver speed behavior and rural road alignment design.” Traffic Engrg. and Control, London, 4, 208–211.
19.
Messer, C. J., Mounce, J. M., and Brackett, R. Q. ( 1981). Highway geometric design consistency related to driver expectancy. Vols. II and III, Federal Highway Administration, Washington, D.C.
20.
“A policy on geometric design of highways and streets.” (1994). AASHTO, Washington, D.C.
21.
Polus, A., and Dagan, D. (1987). “Models for evaluating the consistency of highway alignment.” Transp. Res. Rec. 1122, Transportation Research Board, Washington, D.C., 47–56.
22.
Proctor, S., and Belcher, M. (1993). “The use of road safety audits in Great Britain.” Traffic Engrg. and Control, London, 2, 61–65.
23.
RAS-L-1. ( 1995). “Richtlinien fuer die Anlage von Strassen/Linienfuehrung.” Forschungsgesellschaft fuer Strassen- und Verkehrswesen (in German).
24.
Ruyters, H. G. J. C. M., Slop, M., and Wegman, F. C. M., eds. ( 1994). “Safety effects of road design standards.” SWOV Institute for Road Safety Research, Leidschendam, The Netherlands.
25.
Sabey, B. E., and Taylor, H. (1980). “The known risks we run: The highway.” TRRL Supplementary Rep. 567, Crowthorne, Berkshire, U.K.
26.
Taiganidis, J., and Kanellaidis, G. (1998). “Approximate perspective design of roads.”J. Transp. Engrg., ASCE, 125(4), 314–323.
27.
Watts, G. R., and Quimby, A. R. (1980). “Aspects of road layout that affect drivers' perception and risk taking.” TRRL Supplementary Rep. 920, Crowthorne, Berkshire, U.K.
28.
Wegman, F. C. M., Roszbach, R., Mulder, J. A. G., Schoon, C. C., and Poppe, F. (1994). “Road safety impact assessment (RIA).” SWOV Rep. R-94-20, Leidschendam, The Netherlands.
29.
Wright, C. C., and Boyle, A. J. (1987). “Road accident causation and engineering treatment: A review of some current issues.” Traffic Engrg. and Control, London, 475–483.
30.
Zegeer, C., and Council, F. M. ( 1993). “Highway design, highway safety, and human factors.” Transp. Res. Circular 414, J. W. Hall and C. L. Dudek, eds.
31.
Zeitlin, L. R. (1993). “Subsidiary task measures of driver loading: A long term field study.” Transp. Res. Rec. 1403, Transportation Research Board, Washington, D.C., 23–27.
Information & Authors
Information
Published In
History
Received: Apr 15, 1997
Published online: Nov 1, 1999
Published in print: Nov 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.