Gap Acceptance at Atypical Stop-Controlled Intersections
Publication: Journal of Transportation Engineering
Volume 125, Issue 3
Abstract
A gap acceptance study was performed at a T-intersection at which left-turn traffic on the through leg had the right-of-way. A number of methods were used to model the critical gap size at this atypical intersection. The critical lag and gap values varied according to the method used to compute them, and the different movement or conflict combinations exhibited different critical values. On the approach required to stop, representative values ranged from a 7.8-s critical gap with the higher priority traffic stream from the right, to a 2.2-s critical lag with the highest priority traffic from the opposite direction. The drivers involved in certain movement or conflict patterns at this intersection with the atypical right-of-way pattern were quite comfortable with short lags and gaps.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ashworth, R. ( 1970). “The analysis and interpretation of gap acceptance data.” Transp. Sci., 4(3), 270–280.
2.
Federal Highway Administration (FHwA). ( 1988). “Manual on uniform traffic control devices for streets and highways.” Rep. No. FHWA-SA-89-006, Federal Highway Administration, Washington, D.C.
3.
Fitpatrick, K. ( 1991). “Gaps accepted at stop-controlled intersections.” Transp. Res. Rec. 1303, Transportation Research Board, National Research Council, Washington, D.C., 103–112.
4.
Gerlough, D. L., and Huber, M. J. ( 1975). “Traffic flow theory.” Spec. Rep. No. 165, Transportation Research Board, National Research Council, Washington, D.C.
5.
Hewitt, R. H. ( 1983). “Measuring critical gap.” Transp. Sci., 17(1), 87–109.
6.
Jordan, P. ( 1990). “Fewer stop signs: More safety, less cost.” Proc., 15th ARRB Conf. at Darwin, Australian Road Research Board, Melbourne, Australia, 57–67.
7.
Kittelson, W. K., and Vandehey, M. A. ( 1991). “Delay effects on driver gap acceptance characteristics at two-way stop-controlled intersections.” Transp. Res. Rec. 1320, Transportation Research Board, National Research Council, Washington, D.C., 154–159.
8.
Kyte, M., Kittelson, W., Tian, Z., Brilon, W., Troutbeck, R., and Mir, S. ( 1994). “New measurements for saturation headways and critical gaps at stop-controlled intersections.” Proc., 2nd Int. Symp. on Hwy. Capacity at Sydney, Austrialian Road Research Board, Melbourne, Australia, 345–364.
9.
Madanat, S. M., Cassidy, M. J., and Wang, M. (1994). “Probabilistic delay model at stop-controlled intersection.”J. Transp. Engrg., ASCE, 120(1), 21–36.
10.
Mason, J. M., Fitzpatrick, K., and Hardwood, D. W. ( 1990). “Field observations of truck operational characteristics related to intersection sight distance.” Transp. Res. Rec. 1280, Transportation Research Board, National Research Council, Washington, D.C., 163–172.
11.
Maze, T. H. ( 1981). “A probabilistic model of gap acceptance behavior.” Transp. Res. Rec. 795, Transportation Research Board, National Research Council, Washington, D.C., 8–13.
12.
Miller, A. J. ( 1971). “Nine estimators of gap-acceptance parameters.” Proc., Traffic Flow and Transp., Int. Symp. on the Theory of Traffic Flow and Transp., G. F. Newell, ed., American Elsevier Publishing Co., New York, 215–235.
13.
Neter, J., and Wasserman, W. ( 1974). Applied linear statistical models. R. D. Irwin, Inc., Homewood, Ill.
14.
Panchavati, S. G. V. ( 1991). “Traffic operations at two-way stop-controlled intersections.” Rep. No. TNW91-07.3, Evaluation and Testing of Theoretical Models for Anal., Transportation Northwest (TransNow), University of Washington, Seattle, Wash.
15.
Solberg, P., and Oppenlander, J. C. ( 1966). “Lag and gap acceptances at stop-controlled intersections.” Hwy. Res. Rec. No. 118, Transportation Research Board, National Research Council, Washington, D.C., 48–67.
16.
Transportation Research Board (TRB). ( 1985). “Highway capacity manual.” Spec. Rep. No. 209, 2nd Ed., Transportation Research Board, National Research Council, Washington, D.C.
17.
Transportation Research Board (TRB). ( 1994). “Highway capacity manual.” Spec. Rep. No. 209, 3rd Ed., Transportation Research Board, National Research Council, Washington, D.C.
18.
Velan, S. M., and VanAerde, M. V. ( 1996). “Gap acceptance and approach capacity at unsignalized intersections.” ITE J., 66(3), 40–45.
Information & Authors
Information
Published In
History
Received: Jul 31, 1998
Published online: May 1, 1999
Published in print: May 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.