Superelevation, Side Friction, and Roadway Consistency
Publication: Journal of Transportation Engineering
Volume 124, Issue 5
Abstract
Growing awareness exists of the important role of consistency in highway alignment design in minimizing the frequency and extent of violations of driver expectancy, to improve highway safety. A simple and practical safety margin, based on an established driver behavior model, is used to investigate two sources of inconsistency: (1) The choice of design speed; and (2) the choice of superelevation and side friction when the curve radius exceeds the minimum. This paper describes a method for choosing the design speed for a horizontal curve, taking into account the extent of the curve. The paper also describes alternative methods for choosing the superelevation and side friction. Using a practical numerical example, the design speed selection and superelevation and side friction selection methods are evaluated with respect to consistency of the safety margin. It is concluded that use of the design speed selection method, and having the superelevation and friction varying linearly with the degree of curvature, will lead to greater alignment consistency and improved safety.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Baldwin, D. M. (1946). “The relation of highway design to traffic accident experience.”Proc., AASHO Convention Group Meeting.
2.
Barnett, J. (1936). “Safe side friction factors and superelevation design.”Proc., Hwy. Res. Bd., Vol. 16, Washington, D.C., 69–80.
3.
Fuller, R. A.(1984). “Conceptualisation of driving behaviour as threat avoidance.”Ergonomics, 27(11), 1139–1155.
4.
Kanellaidis, G.(1996). “Human factors in highway geometric design.”J. Transp. Engrg., ASCE, 122(1), 59–66.
5.
Krammes, R. A., et al. (1995). “Horizontal alignment design consistency for rural two-lane highways.”Rep. No. FHWA-RD-94-034, Fed. Hwy. Admin., Washington, D.C.
6.
Lunenfeld, H., and Alexander, G. J. (1990). “A users' guide to positive guidance,” 3rd Ed., Rep. No. FHWA-SA-90-017, Fed. Hwy. Admin., Washington, D.C.
7.
McLean, J. R. (1979). “An alternative to the design speed concept for low speed alignment design.”Transp. Res. Rec. 702, Transp. Res. Bd., Washington, D.C., 55–63.
8.
McLean, J. R. (1983). “Speeds on curves: Side friction considerations.”Rep. No. ARR 126, Australian Rd. Res. Bd., Melbourne, Australia.
9.
Näätänen, R., and Summala, H. (1976). Road user behaviour and traffic accidents. North-Holland and American Elsevier, Amsterdam, The Netherlands and New York, N.Y. Policy on geometric design of rural highways . (1954). Am. Assn. of State Hwy. Officials, Washington, D.C. Policy on geometric design of highways and streets . (1990). Am. Assn. of State Hwy. and Transp. Officials, Washington, D.C.
10.
Rowan, N. J., Woods, D. L., Stover, V. G., Anderson, D. A., and Dozier, J. H. (1980). “Safety design and operational practices for streets and highways.”Technol. Sharing Rep. No. 80-228, Fed. Hwy. Admin., Washington, D. C. Rural road design: Guide to the geometric design of rural roads . (1993). Austroads, Sydney, Australia.
11.
Summala, H.(1988). “Risk control is not risk adjustment: The zero-risk theory of driver behaviour and its implications.”Ergonomics, 31(4), 491–506.
12.
Taragin, A. (1954). “Driver performance on horizontal curves.”Proc., Hwy. Res. Bd., Vol. 33, Washington, D.C., 446–466.
13.
Wilde, G. J. S.(1982). “The theory of risk homeostasis: Implications for safety and health.”Risk Analysis, 2(4), 209–225.
14.
Wong, Y. D., and Nicholson, A. J.(1992). “Driver behaviour at curves: Risk compensation and the margin of safety.”Accident Analysis and Prevention, 24(4), 425–436.
15.
Wong, Y. D., and Nicholson, A. J.(1993). “Speed and lateral placement on horizontal curves.”Rd. and Transp. Res., 2(1), 74–87.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 124 • Issue 5 • September 1998
Pages: 411 - 418
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Sep 1, 1998
Published in print: Sep 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.