Effective Temperature Differential in Concrete Pavements
Publication: Journal of Transportation Engineering
Volume 124, Issue 2
Abstract
To evaluate curling stresses in concrete pavements requires the input of a temperature differential or even a temperature distribution between the top and bottom of slabs. However, the slab temperature fluctuates throughout a day with many weather factors, such as air temperature, sunshine, clouds, and rain. It is still controversial about which measure during a day is the most appropriate input for curling analysis. The stress model adopted in this study to estimate pavement damage was developed with three-dimensional (3D) finite-element analysis. Field temperature measurements during different times of a day at 14 sites in the United States were input to calculate pavement compound stresses due to curling and wheel loads. By introducing fatigue hypothesis, an algorithm was developed to obtain “equivalent damages” and “effective temperature differential.” The calculated effective temperature differentials were further correlated with local climate data.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AASHTO interim guide for design of pavement structures. (1972). American Association of State Highway and Transportation Officials (AASHTO).
2.
Bradbury, R. D. (1938). Reinforced concrete pavements. Wire Reinforcement Inst., Washington, D.C.
3.
Choubane, B., and Tia, M. (1992). “Non-linear temperature gradient effect on maximum warping stresses in rigid pavements.” 71st Annual Meeting of the Transp. Res. Board, Washington, D.C., Jan. 12–16.
4.
“Climate atlas of the United States.” (1983). National Oceanic and Atmospheric Administration, U.S. Dept. of Commerce, Washington, D.C.
5.
Darter, M. I., Hall, K. T., and Kuo, C.-M. (1995). Support under Portland cement concrete pavements. Nat. Cooperative Hwy. Res. Program, Rep. 372, Transportation Research Board, National Research Council, Washington, D.C.
6.
Kuo, C.-M. (1991). “The effects of temperature loading on the rigid pavement slabs,” MS thesis, Nat. Cheng Kung Univ., Tainan, Taiwan (in Chinese).
7.
Kuo, C.-M. (1994). “Three-dimensional finite element analysis of concrete pavement,” PhD thesis, Univ. of Illinois at Urbana-Champaign, Urbana, Ill.
8.
Kuo, C.-M. (1995a). “3-D analysis of the effects of non-linear temperature distribution of curling stresses in concrete pavements.”Proc., 2nd Int. Conf. on Rd. & Airfield Pavement Technol., Singapore, 517–524.
9.
Kuo, C.-M. (1995b). “The effects of non-linear temperature gradients in concrete pavements on curling stresses.” The 8th Pavement Engrg. Conf. and Exhibition, Taipei, Taiwan, 553–561 (in Chinese).
10.
Rao, D. S. P.(1978). “Temperature distributions and stresses in concrete bridges.”Am. Concrete Inst. J., 75(23), 209–217.
11.
“The AASHO road test, report 5, pavement research.” (1962). Spec. Rep. 61E, Hwy Res. Board.
12.
Thompson, M. R., and Barenberg, E. J. (1992). “Calibrated mechanistic structural analysis procedures for pavements phase 2.”Final Rep., NCHRP Project 1-26, Transp. Res. Board, Washington, D.C.
13.
Westergaard, H. M. (1926). “Analysis of stresses in concrete pavements due to variations of temperature.”Proc., 6th Annual Meeting, Hwy. Res. Board, Washington, D.C., 201–215.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Mar 1, 1998
Published in print: Mar 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.