General Outlook of Pavement and Vehicle Dynamics
Publication: Journal of Transportation Engineering
Volume 123, Issue 6
Abstract
The interaction between vehicle and pavement is complex since pavement roughness excites the dynamic forces generated by vehicles, while these dynamic forces simultaneously increase the pavement roughness. The objective of this paper is to provide an overview of the results of recent research related to pavement and vehicle dynamics and their interaction and to evaluate their potential use in the design and management of pavements. Pavement dynamic models are capable of determining stresses, strains, and deflections in various directions when harmonic, pulse, or transient loads are applied. Vehicle dynamic models simulate the effect of pavement roughness on the inertia of various vehicle components. These models can predict the dynamic forces produced by different axles and wheels of traveling vehicles at different locations along the pavement. Pavement response computed using dynamic models matches field measurements closer than those computed using static models. The concept of vehicle-pavement interaction can be applied to weigh-in-motion, pavement design and performance, and vehicle regulations.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ABAQUS, finite element computer program. (1995). Theory Manual, Version 5.4, Hibbitt, Karlsson and Sorensen, Inc., Pawtucket, RI.
2.
Barbour, I. A., and Newton, W. H. (1992). “Improving the accuracy of weigh-in-motion systems.” Transportation Research Laboratory, London, U.K.
3.
Brademeyer, B. D. (1988). “Mechanistic vehicle-pavement interactions.”Proc., FHWA Load Equivalency Workshop.
4.
De Beer, M. (1994). “Measurement of tire/pavement interface stresses under moving wheel loads.”Proc., Third Engrg. Found. Conf. on Vehicle-Road and Vehicle-Bridge Interation.
5.
Eringen, A. C., and Suhubi, E. S. (1975). “Elastodynamics.”Linear theory, Vol. 2, Academic Press, New York, N.Y.
6.
Fernando, E. G., and Lytton, R. L. (1992). “A system for evaluating the impact of truck characteristics and use on flexible pavement performance and life-cycle costs.”Proc., 7th Int. Conf. on Asphalt Pavements, Vol. 3.
7.
Gillespie, T. D., et al. (1993). “Effects of heavy-vehicle characteristics on pavement response and performance.”Rep. 353, NCHRP, Transportation Research Board, Washington, D.C.
8.
Mamlouk, M. S. (1996). “Effect of vehicle-pavement interaction on weigh-in-motion equipment design.” Heavy Vehicle Systems, Int. J. of Vehicle Design, Vol. 3(1/2/3/4), Buckinghamshire, U.K.
9.
Mamlouk, M. S., and Davies, T. G. (1984). “Elasto-dynamic analysis of pavement deflections.”J. Transp. Engrg., ASCE, 110(6).
10.
O'Connel, S. P., et al. (1986). “Analysis of moving dynamic loads on highway pavements: part 1—vehicle responses.”Proc., Int. Symp. on Heavy Vehicle Weights and Dimensions.
11.
Slavik, M. M., and Visser, A. T. (1990). “Development of weigh-in-motion network in South Africa.”Transp. Res. Rec. 1272, Transportation Research Board, Washington, D.C.
12.
Sweatman, P. F. (1983). “A study of dynamic wheel forces in axle group suspensions of heavy vehicles.”Spec. Rep. 27, Australian Rd. Res. Board, Australia.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Nov 1, 1997
Published in print: Nov 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.