Reliability-Based Model for Predicting Pavement Thermal Cracking
Publication: Journal of Transportation Engineering
Volume 122, Issue 5
Abstract
Thermal cracking of asphalt pavements is a serious problem in Canada and the northern parts of the United States. On many occasions, either at the design stage or during service, highway agencies demand a forecast of pavement performance rating, which is highly sensitive to the intensity of cracking. There are two failure modes of thermal cracking: low-temperature cracking and thermal-fatigue cracking. Low-temperature cracking is caused by accumulated thermal stresses in the pavement layer during cold winters or spring thaws. Thermal-fatigue cracking is caused by daily cyclic thermal loading. Classical probabilistic approaches have been applied to pavement design systems, including thermal cracking predictions, during the past three decades. Advances in reliability analysis, however, have proven that classical reliability methods are inconsistent, and mandate that current design procedures should be revised accordingly. This paper presents an improved reliability model for predicting thermal cracking. The proposed model accounts for the variability in the component design variables and the correlation between the two failure modes. The model results were verified using Monte Carlo simulation, and the sensitivity of the predicted intensity of cracking to various design variables was examined.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ang, A. H., and Tang, W. H. (1984). Reliability concepts in engineering planning and design—Vol II: decision, risk, and reliability . John Wiley & Sons, Inc., New York, N.Y.
2.
Bai, B. Q., and Anderson, K. O. (1994). “An improved theoretical method for prediction of cracking temperatures in asphalt pavements.”Proc., Can. Tech. Asphalt Assn., 39, Polyscience Publications, Inc., Morin Heights, Quebec, Canada, 124–155.
3.
Chua, K. H., Der Keureghian, A., and Monismith, C. L. (1992). `Stochastic model for pavement design.”J. Transp. Engrg., ASCE, 118(6), 769–786.
4.
Cornell, C. A.(1969). “A probabilistic-based structural code.”J. Am. Concrete Inst., 66(12), 974–985.
5.
Darter, M. I., and Hudson, W. R. (1973). “Probabilistic design concepts applied to flexible pavement system design.”Res. Rep. No. CFHR 1-8-69-123-18, Univ. of Texas at Austin, Tex.
6.
Ditlevesen, O. (1981). Uncertainty modelling with applications to multidimensional civil engineering systems . McGraw-Hill Book Co., Inc., New York, N.Y.
7.
Finn, F., Saraf, C. L., Kulkarni, R., Nair, K., Smith, W., and Abdullah, A. (1986). “Development of pavement structural subsystems.”NCHRP Rep. 291, Transp. Res. Board, Nat. Res. Council, Washington, D.C.
8.
George, K. P., and Husain, S. (1986). “Thickness design for flexible pavement—a probabilistic approach.”65th Annu. Meeting, Transp. Res. Board, Washington, D.C.
9.
Hajek, J. J., and Haas, R. C. G. (1972). “Predicting low temperature cracking frequency of asphalt concrete pavements.”Transp. Res. Rec. 407, TRB, Nat. Res. Council, Washington, D.C., 39–54.
10.
Hasofer, A. M., and Lind, N. C.(1974). “An exact and invariant second-moment code format.”J. Engrg. Mech. Div., ASCE, 100(1), 111–121.
11.
Heukelom, W.(1966). “Observations on the rheology and fracture of bitumins and asphalt mixes.”Proc., Assn. of Asphalt Paving Technologists, 35, 358–399.
12.
Hills, J. F., and Brein, D.(1966). “The fracture of bitumins and asphalt mixes by temperature induced stresses.”Proc., Assn. of Asphalt Paving Technologists, 35, 292–309.
13.
Hiltunen, D., and Roque, R.(1994). “A mechanics-based prediction model for thermal cracking of asphalt concrete pavements.”Proc., Assn. of Asphalt Paving Technologists, 53, 83–117.
14.
Huang, Y. H. (1993). Pavement analysis and design . Prentice-Hall, Inc., Englewood Cliffs, N.J.
15.
Irick, P., Hudson, W. R., and McCollough, B. F.(1987). “Application of reliability concepts to pavement design.”6th Int. Conf. of Struct. Des. of Asphalt Pavements, The Univ. of Michigan, Ann Arbor, Mich., 1, 163–179.
16.
Lytton, R. L., Shanmugham, U., and Garrett, B. D. (1983). “Design of asphalt pavements for thermal-fatigue cracking.”RR 284-4, Tex. Transp. Inst., Texas A&M Univ., College Station, Tex.
17.
Madsen, H. O., Krenk, S., and Lind, N. C. (1986). Methods of structural safety . Prentic-Hall, Inc., Englewood Cliffs, N.J.
18.
Moavenzadeh, F., and Brademeyer, B. (1977). “A stochastic model for pavement performance and management.”Proc., 4th Int. Conf. on Struct. Des. of Asphalt Pavements, The Univ. of Michigan, Ann Arbor, Mich.
19.
Pfieffer, V. P., and Van Doormaal, P. M. (1936). “The rheological properties of asphaltic bitumen.”Proc., Assn. of Asphalt Paving Technologists, 22.
20.
“Predictive design procedures—VESYS user's manual.” (1978). Rep. No. FWHA-RD-77-154, Fed. Hwy. Admin., Washington, D.C.
21.
Rackwitz, R., and Fiessler, B.(1978). “Structural reliability under combined random load sequences.”Comp. and Struct., 9, 489–494.
22.
Riggins, M., Lytton, R., and Garcia-Diaz, A. (1985). “Developing stochastic flexible pavement distress and serviceability equations.”64th Annu. Meeting, Transp. Res. Board, Washington, D.C.
23.
Ruth, B. E., Bloy, L. A., and Avital, A. A.(1982). “Prediction of pavement cracking at low temperatures.”Proc., Assn. of Asphalt Paving Technologists, 51, 53–90.
24.
Shahin, M. Y., and McCollough, B. F. (1972). “Prediction of low-temperature and thermal-fatigue cracking in flexible pavements.”Rep. No. PB-220 858, The Univ. of Texas, Austin, Tex.
25.
Shalaby, A., Easa, S. M., and Abd El Halim, A. O. (1994). “User's guide of TCRACK: a program for predicting pavement thermal cracking using advanced reliability method.”Res. Rep. LU-TRC-RR-94-2, Transp. Res. Ctr., Lakehead Univ., Thunder Bay, Ontario, Canada.
26.
Smith, G. N. (1986). Probability and statistics for civil engineers . Nichols Publishing Company, New York, N.Y.
27.
Soussou, J. E., and Moavenzadeh, F. (1974). Statistical characteristics of fatigue damage accumulation in flexible pavements: fatigue and dynamic testing of bituminous mixtures; ASTM STP 561, 3–11, ASTM, Philadelphia, Pa.
28.
Thoft-Christensen, P., and Baker, M. J. (1982). Structural reliability theory and its applications, Springer-Verlag KG, Berlin.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 122 • Issue 5 • September 1996
Pages: 374 - 380
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Sep 1, 1996
Published in print: Sep 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.