Stiffness Reductions of Flexible Pavements due to Cumulative Fatigue Damage
Publication: Journal of Transportation Engineering
Volume 122, Issue 2
Abstract
A new asphalt layer modulus degradation model for use with flexible-pavement analysis procedures is described. The model is capable of determining the reduction in stiffness of the asphaltic material in a flexible pavement due to cumulative fatigue damage. Measured surface deflection bowls from a number of test pavements are used with a pavement parameter back-calculation procedure, to determine the reduction in stiffness of the asphaltic material throughout the life of the pavement. Results show an exponential relationship between the reduction in asphalt layer stiffness and cumulative fatigue damage. This type of relationship does not agree with an earlier theoretical continuum damage mechanics model, where the relationship between the reduction in asphalt layer stiffness and cumulative fatigue damage was predicted to be linear.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AASHTO guide for design of pavement structures; Vol. 1., (1986). Am. Assoc. of State Hwy. and Transport Officials. (AASHTO), Washington, D.C.
2.
Brown, S. F. (1978). “Material characteristics for analytical pavement design.”Developments in highway pavement engineering, P. S. Pell, ed., Applied Science Publishers Ltd., London, England.
3.
Brunton, J. M., and De Almeida, J. R. (1991). “Modelling material nonlinearity in a pavement backcalculation procedure.”Transp. Res. Rec. 1377, Transp. Res. Board, Washington, D.C., 17–25.
4.
Collop, A. C. (1994). “Effects of traffic and temperature on flexible pavement wear,” PhD thesis, Engrg. Dept., Cambridge Univ., Cambridge, England.
5.
Croney, D. (1990). “Is the measured deflection of a flexible pavement a reliable guide to life prediction and overlay design.”Highways, Surrey, England, 58(Part 1968), 24–26.
6.
Hardy, M. S. A. (1990). “The response of flexible pavements to dynamic tyre forces,” PhD thesis, Engrg. Dept. Cambridge Univ., Cambridge, England.
7.
Harichandran, R. S., Mahmood, T., Raab, A. R., and Baladi, G. Y. (1994). “Backcalculation of pavement layer moduli, thickness and stiff layer depth using a modified Newton method.”ASTM Spec. Tech. Publ. No. 1198, ASTM, Philadelphia, Pa., 68–82.
8.
Hoyinck, W. T., Van der Loo, J. M. M., Mulderiji, J., and Wegmeetdienst, R. K. (1992). “Comparative tests of FWD and Lacroix-deflectograph.”Proc., 7th Int. Conf. on Asphalt Pavements; Vol. 3, Int. Soc. for Asphalt Pavements, Austin, Tex., 179–193.
9.
Jameson, G. W., Sharp, K. G., Vertessy, N. J., and Yeo, R. (1992). “The fatigue performance of asphalt and cement treated crushed rock under accelerated loading.”Proc., 16th Australian Road Res. Board Conf., Australian Road Res. Board, Nunawading, Australia, 335–361.
10.
Johnson-Clark, J. R., Vertessy, N. J., Fossey, D. W., Smith, P. B., and Sharp, K. G. (1991). “Data report on testing of full depth asphalt pavements: Mulgrave ALF trial.”Res. Rep. ARR No. 209, Australian Road Res. Board, Victoria, Australia.
11.
Kadar, P. (1991). “The performance of overlay treatments and modified binders under accelerated full-scale loading—the Callington ALF trial.”Res. Rep. ARR No. 198, Australian Road Res. Board, Victoria, Australia.
12.
Kenis, W. (1977). “Predictive design procedures, VESYS users manual. An interim design method for flexible pavements using the VESYS structural subsystem.”FHWA Final Rep., FHWA-RD-77-154, U.S. Dept. of Transp., Washington, D.C.
13.
Maestas, J. M., and Mamlouk, M. S. (1991). “Comparison of pavement deflection analysis methods using overlay design.”Transp. Res. Rec. 1377, Transp. Res. Board, Washington, D.C., 17–25.
14.
Monismith, C. L., and Deacon, J. A.(1969). “Fatigue of asphalt paving mixtures.”J. Transp. Engrg., ASCE, 95(2), 317–346.
15.
Press, W. H., Flannery, B. P., Teukolsky, S. A., and Vetterling, W. T. (1992). Numerical recipes. Cambridge University Press, Cambridge, England.
16.
Rada, G. R., Richter, C. A., and Stephanos, P. J. (1991). “Layer moduli from deflection measurements: software selection and development of strategic highway research program's procedure for flexible pavements.”Transp. Res. Rec. 1377, Transp. Res. Board, Washington, D.C.
17.
Rowe, G. M. (1993). “Performance of asphalt mixtures in the trapezoidal fatigue test.”Asphalt Paving Technol., Vol. 62, 344–384.
18.
Schmidt, B. (1989). “A study of the relationship between temperature and stiffness of full depth asphalt pavements.”Internal Rep. AIR 357-12, Australian Road Res. Board, Victoria, Australia.
19.
Sebaaly, P. E., Tabatanee, N., and Scullion, T. (1991). “Comparison of backcalculated moduli from falling weight deflectometer and truck loading.”Transp. Res. Rec. 1377, Transp. Res. Board, Washington, D.C., 17–25.
20.
Siddharthan, R., Sebaaly, P. E., and Javaregowda, M. (1992). “Influence of statistical variation in falling weight deflectometers on pavement analysis.”Transp. Res. Rec. 1377, Transp. Res. Board, Washington, D.C., 57–66.
21.
Tam, W. S., and Brown, S. F. (1989). “Back-analyzed elastic stiffness: comparison between different evaluation procedures.”Non destructive testing of pavements and backcalculation of moduli, ASTM STP, ASTM, Philadelphia, Pa., Vol. 1026, 189–200.
22.
Tayebali, A. A., Rowe, G. M., and Sousa, J. B. (1992). “Fatigue response of asphalt-aggregate mixtures.”Assoc. of Asphalt Paving Technologists, Vol. 61, 333–352.
23.
Ullidtz, P. (1987). Pavement analysis . Elsevier Science Publishing Co., Inc., Amsterdam, The Netherlands.
24.
Ullidtz, P. (1992). “Modelling of pavement performance.”Proc., 7th Int. Conf. on Asphalt Pavements; Vol. 2, Int. Soc. for Asphalt Pavements, Austin, Tex., 338–355.
25.
Wang, M. C., and Larson, T. D. (1978). “Use of road rater deflections in pavement evaluation.”Transp. Res. Rec. 666, Transp. Res. Board, Washington, D.C., 129–150.
Information & Authors
Information
Published In
Copyright
Copyright © 1996 American Society of Civil Engineers.
History
Published online: Mar 1, 1996
Published in print: Mar 1996
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.