Contact-Element Model for Dynamic Analysis of Jointed Concrete Pavements
Publication: Journal of Transportation Engineering
Volume 121, Issue 5
Abstract
A finite-element algorithm is developed to analyze the dynamic response of multiple, jointed concrete pavements to moving aircraft loads. In the finite-element idealization, the pavement-subgrade system is idealized by thin-plate finite elements resting on a Winkler-type viscoelastic foundation represented by a series of distributed springs and dashpots. The dowel bars at the transverse joints are represented by plane frame elements. The dowel-pavement interaction effects are accounted for by employing contact elements between the pavement and the dowel bar. Keyed joint or aggregate interlock joint is assumed for the longitudinal joint and is represented by vertical spring elements. The dynamic aircraft-pavement interaction effects are considered in the analysis by modeling the aircraft by masses supported by spring-dashpot systems representing the landing gear of the aircraft. The accuracy of the computer code developed is verified by the available experimental and analytical solutions. A parametric study is conducted to investigate the effects of various parameters on the dynamic response of pavements.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Alvappillai, A. (1992). “Dynamic analysis of rigid pavements considering pavement-subgrade-aircraft interaction,” PhD dissertation, School of Civ. Engrg. and Envir. Sci., Univ. of Oklahoma, Norman, Okla.
2.
Bathe, K. J., and Chaudhary, A.(1985). “A solution method for planar and axisymmetric contact problems.”Int. J. Numerical Methods in Engrg., 21(1), 65–88.
3.
Campos, L. T., Oden, J. T., and Kikuchi, N. (1982). “A numerical analysis of a class of contact problems with friction in elastostatics.”Comp. Methods Appl. Mech. Engrg., Vol. 34, 821–845.
4.
Chen, W. H., and Tsai, P.(1986). “Finite element analysis of elastodynamic sliding contact problems with friction.”Computers and Struct., 22(6), 925–938.
5.
Cheung, Y. K., and Zienkiewicz, O. C. (1965). “Plates and tanks on elastic foundation—an application of finite element method.”Int. J. Solids and Struct., Vol. 1, 451–461.
6.
Chou, Y. T. (1981). “Structural analysis computer programs for rigid multicomponent pavement structures with discontinuities, WESLIQID and WESLAYER.”Tech. Rep. 1, 2, and 3, U.S. Army Engrg. Wtrwy. Experiment Station, Vicksburg, Miss.
7.
Desai, C. S., and Nagaraj, B. K.(1988). “Modeling for cyclic normal and shear behavior of interfaces.”J. Engrg. Mech., ASCE, 114(7), 1198–1217.
8.
Dundurs, J., Kiattikomol, K., and Keer, L. M.(1974). “Contact between plates and sagged supports.”J. Engrg. Mech., ASCE, 100(2), 445–456.
9.
Federal Aviation Administration. (1978). “Airport pavement design and evaluation.”FAA Advisory Circular, AC 150/5320-6c, Washington, D.C.
10.
Francavilla, A., and Zienkiewicz, O. C.(1975). “A note on numerical computation of elastic contact problems.”Int. J. Numerical Methods in Engrg., ASCE, 9(4), 913–924.
11.
Friberg, B. F. (1938). “Load and deflection characteristics of dowels in transverse joints in concrete pavements.”Proc., HRB, Vol. 18, Part 1, Hwy. Res. Board, Washington, D.C., 140–154.
12.
Huang, W. H., and Wang, S. T. (1973). “Finite-element analysis of concrete slabs and its implications for rigid pavement design.”HRB, HRR 466, Hwy. Res. Board, Washington, D.C., 55–69.
13.
Ioannides, A. M., and Korovesis, G. T. (1990). “Backcalculation of joint related parameters in concrete pavements.”Proc., 3rd Int. Conf. on Bearing Capacity of Roads and Airfields, Vol. 1, 549–558.
14.
Ioannides, A. M., and Korovesis, G. T.(1992). “Analysis and design of doweled slab-on-grade pavement systems.”J. Transp. Engrg., ASCE, 118(6), 745–768.
15.
Kerr, A. D. (1981). “Continuously supported beams and plates subjected to moving loads—a survey.”SM Archives, No. 6, 401–449.
16.
Kikuchi, N., and Song, Y. J.(1981). “Penalty/finite element approximations of a class of unilateral problems in linear elasticity.”Quarterly Appl. Math., 39(1), 1–22.
17.
Krauthammer, T., and Western, K. L.(1987). “Joint shear transfer effects on pavement behavior.”J. Transp. Engrg., ASCE, 114(5), 505–529.
18.
Kukreti, A. R., Taheri, M. R., and Ledesma, R. H.(1992). “Dynamic analysis of rigid airport pavements with discontinuities.”J. Transp. Engrg., ASCE, 118(3), 341–359.
19.
Larralde, J. (1984). “Structural analysis of rigid pavement with pumping,” PhD dissertation, Purdue Univ., West Lafayette, Ind.
20.
Nour-Omid, B., and Wriggers, P.(1986). “A two-level iteration method for solution of contact problems.”Comp. Methods in Appl. Mech. and Engrg., 54(1), 131–144.
21.
Pian, T. M. M., and Kubomura, K. (1981). “Formulation of contact problems by assumed stress hybrid elements.”Nonlinear finite element analysis in structural mechanics, W. Wunderlich et al., eds., Springer-Verlag, Inc., New York, N.Y.
22.
Sachdeva, T. D., and Ramakrishnan, C. V. (1981). “A finite element solution for the two-dimensional elastic contact problems with friction.”Int. J. Numerical Methods in Engrg., Vol. 17, 1257–1271.
23.
Tabatabaie, A. M., and Barenberg, E. J. (1978). “Finite element analysis of jointed or cracked concrete pavements.”Transp. Res. Rec. 671, Transp. Res. Board, Washington, D.C., 11–19.
24.
Taheri, M. R., Zaman, M., and Alvappillai, A.(1990). “Dynamic response of concrete pavements to moving aircraft.”Mathematical Modelling, London, England, 14(11), 562–575.
25.
Taheri, M. R., and Ting, E. C.(1990). “Dynamic response of plates to moving loads: finite element method.”Comp. and Struct., 34(3), 509–521.
26.
Tayabji, S. D., and Colley, B. E. (1981). “Improved rigid pavement joints.”Transp. Res. Rec. 930, Transp. Res. Board, Washington, D.C., 69–93.
27.
Teller, L. W., and Cashell, M. D.(1958). “Performance of dowels under repetitive loading.”Public Roads, 30(1), 1–24.
28.
Tia, M., Armaghani, J. M., Wu, C. L., Lei, S., and Toye, K. L. (1987). “FEACONS III computer program for analysis of jointed concrete pavements.”Transp. Res. Rec. 1136, Transp. Res. Board, Washington, D.C., 12–22.
29.
Zaman, M. M., Desai, C. S., and Drumm, E. C.(1984). “Interface model for dynamic soil-structure interactions.”J. Geotech. Engrg., ASCE, 110(9), 1257–1273.
30.
Zaman, M., Taheri, M. R., and Alvappillai, A. (1991). “Dynamic analysis of a thick plate on viscoelastic foundation to moving loads.”Int. J. for Numerical Analytical Methods in Geomechanics, Vol. 15, 627–647.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Sep 1, 1995
Published in print: Sep 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.