Investigation of Bonding between Asphalt Layers on Road Construction
Publication: Journal of Transportation Engineering
Volume 121, Issue 4
Abstract
Bonding of asphalt layers on road construction is usually examined with the pull-off test, measuring the adhesive power. This value however, is not appropriate to characterize the fracture-mechanical behavior of layer bondings and is thus inappropriate to be introduced into fracture-mechanical finite-element simulations. Therefore a simple procedure for measuring the fracture-mechanical behavior of layer bondings has been developed in this study. Cubic or cylindrical specimens (with their interface in their middle and a starter notch in the interface) are split under stable crack growth conditions. During testing, the complete load-displacement curve is determined until final fracturing of the bonding takes place. The load-displacement curve characterizes the mechanical behavior of the material bonding in the crack opening mode and is an important basis for a numerical treatment of interface problems. Results obtained with this new measuring procedure are presented and discussed. As an example, propagation of reflection cracks in a pavement consisting of two asphalt layers is simulated for single loading of the pavement.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Hillemeier, B. (1976). Bruchmechanische Untersuchungen des Rißfortschrittes in zementgebundenen Werkstoffen, PhD thesis, Univ. Karlsruhe, Karlsruhe, Germany.
2.
Leutner, R.(1979). “Untersuchungen des Schichtverbundes beim bituminüsen Oberbau.”Bitumen, 3, 84–91.
3.
Mazars, J.(1986). “A description of micro- and macro scale damage of concrete structures.”Engrg. Fract. Mech., 25, 729–733.
4.
Reunion Internationales des Laboratoires d'Essais et de Recherches sur les Materiaux et les Constructions. (RILEM) (50-FMC) (1986). Determination of the fracture of mortar and concrete by means of three-point-bend tests on notched beams, Mat. and Struct., 18, 287–290.
5.
RVS 8.05.14. (1991). “Directions and prescriptions for road constructions (Richtlinien und Verordnungen für den Straßenbau).”Oberbauarbeiten (ohne Deckarbeiten)/Tragschichten/Bituminöse Tragschichten im Heißverfahren, Forschungsgesellschaft für das Verkehrs-/und Straßenwesen, Vienna, Austria.
6.
RVS 11.065. (1991). “Directions and prescriptions for road construction (Richtlinien und Verordnugen für den straßenbau).”Grundlagen/Prüfverfahren/Haftverbund von Asphaltschichten, Forschungsgesellschaft für das Verkehrs-/und Straßenwesen, Vienna, Austria.
7.
“Standard test method for plane-strain fracture toughness of metallic materials.” (1983). ASTM E399: Annual Book of ASTM Standards, ASTM, Philadelphia.
8.
Tschegg, E. K. (1986). “Equipment and appropriate specimen shapes for tests to measure fracture values (Prüfeinrichtung zur Ermittlung von bruchmechanischen Kennwerten sowie hierfür geeignete Prüfkörper),”AT No. 390328, Austrian Patent Office, Vienna, Austria.
9.
Tschegg, E. K.(1991). “New equipments for fracture tests on concrete.”Mat. Testing, 33, 338–342.
10.
Tschegg, E. K. (1993). “Lasteinleitungsvorrichtung,”Austrian Patent AT No. 396.997, Austrian Patent Office, Vienna, Austria.
11.
Tschegg, E. K., and Stanzl, S. E.(1991a). “Adhesive power measurements of bonds between old and new concrete.”J. Mat. Sci., 26, 5189–5194.
12.
Tschegg, E. K., and Stanzl, S. E. (1991b). Adhesive power of bonded concrete.”Proc., RILEM/ESIS Conf. Fracture Processes in Brittle Disordered Mat.: Concrete, Rock, Ceramics. J. G. M. Mier, J. G. Rots, and A. Bakker, eds., E & FN, London, U.K., 809–818.
13.
Tschegg, E. K., Stanzl-Tschegg, S. E., and Litzka, J. (1993). “New testing method to characterize mode 1 fracturing of asphalt aggregate mixtures.”Proc., 2nd Int. RILEM Conf. “Reflective Cracking in Pavements,” J. M. Rigo, R. D. Degeimbre, and L. Franken, eds., E & FN, London, U.K., 263–270.
14.
Tschegg, E. K., Tan, D. M., Kirchner, H. O. K., and Stanzl, S. E.(1993b). “Interfacial and subinterfacial fracture in concrete.”Acta Metall. Mat., 41(2), 569–576.
15.
Weber, R.(1991). “Rißbildung in Asphaltstraßen als Folge mangelhaften Schichtverbundes.”Straße und Tiefbau, 45(10), 6–13.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Jul 1, 1995
Published in print: Jul 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.