Mechanistic Model for Transition Probabilities
Publication: Journal of Transportation Engineering
Volume 120, Issue 1
Abstract
One important input in a pavement‐management system is the matrix of transition probabilities. A methodology is proposed that employs mechanistic distress submodels for evaluating pavement distresses in terms of fundamental material behavior and structural response to environment and traffic factors. This approach allows the distress modes to be modeled individually so that the appropriate measures for correcting deficiencies can be readily identified. The performance submodels are formulated within a stochastic framework for determining the transition probabilities. The formulation is based on state‐of‐the‐art structural reliability methods, specifically, the first‐order reliability method (FORM), and is applicable to individual and combined modes of distresses. It is able to handle numerous variables with various distribution types and correlations. The multimode distress case is an extension of the individual distress modes incorporating the concept of cut‐sets and directional simulation. With the proposed methodology, the assumption of a time‐invariance matrix of transition probabilities, as adopted in existing pavement‐management systems, is no longer necessary.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bjerager, P. (1988). “Probability integration by directional simulation.” J. Engrg. Mech., ASCE, 114(8), 1285–1302.
2.
Butt, A. A., Shahin, M. Y., Feighan, K. J., and Carpenter, S. H. (1987). “Pavement performance prediction model using the Markov process.” Trans. Res. Rec. 1123, Transportation Research Board, Washington, D.C., 12–19.
3.
Carnahan, J. V. (1988). “Analytical framework for optimizing pavement maintenance.” J. Transp. Engrg., ASCE, 114(3), 307–322.
4.
Chua, K. H., Der Kiureghian, A., and Monismith, C. L. (1992). “A stochastic model for pavement design.” J. Transp. Engrg., ASCE, 118(6), 769–786.
5.
Claessen, A. I. M., and Ditmarsch, R. (1977). “Pavement evaluation and overlay design, the Shell method.” Proc., 4th Int. Conf. on Struct. Design of Asphalt Pavements, University of Michigan, Ann Arbor, Mich., 1, 629–648.
6.
Darter, M. I., and Hudson, W. R. (1973). “Probabilistic design concepts applied to flexible pavement system design.” Rept. No. CFHR 1‐8‐69‐123‐18, University of Texas at Austin, Austin, Tex.
7.
Der Kiureghian, A., and Liu, P. L. (1986). “Structural reliability under incomplete probability information.” J. Engrg. Mech., ASCE, 112(1), 85–104.
8.
Finn, F., Saraf, C., Kulkarni, R., Nair, K., Smith, W., and Abdullah, A. (1977). “The use of prediction subsystems for the design of pavement structures.” 4th Int. Conf. on Struct. Design of Asphalt Pavements, University of Michigan, Ann Arbor, Mich., 1, 3–38.
9.
Feighan, K. J., Shahin, M. Y., Sinha, K. C., and White, T. D. (1989). “Application of dynamic programming and other mathematical techniques to pavement management systems.” Transp. Res. Rec. 1200, Transportation Research Board, Washington, D.C., 90–98.
10.
George, K. P., and Husain, S. (1986). “Thickness design for flexible pavement—a probabilistic approach.” Proc., 65th Annu. Meeting, Transportation Research Board, Washington. D.C.
11.
George, K. P., and Nair, S. K. (1982). “Probabilistic fatigue design for flexible pavements.” 5th Int. Conf. on Struct. Design of Asphalt Pavements.
12.
Jackson, N. C. (1985). “Operation of the Washington state pavement management system.” Proc., 64th Annual Meeting, Transportation Research Board, Washington, D.C.
13.
Kulkarni, R. B. (1984). “Dynamic decision model for a pavement management system.” Transp. Res. Rec. 997, Transportation Research Board, Washington, D.C., 11–18.
14.
Lin, H. Z., and Der Kiureghian, A. (1987). “Second‐order system reliability using directional simulation.” 5th Int. Conf. on Application of Statistics and Probability in Soil and Struct. Engrg. (ICASP5), Vancouver, Canada, 930–937.
15.
Liu, P. L., and Der Kiureghian, A. (1986). “Optimization algorithms for structural reliability analysis.” Rep. No. UCB/SESM‐86/09, Dept. of Civ. Engrg., Div. of Struct. Engrg. and Struct. Mech., University of California, Berkeley, Calif.
16.
Madsen, H. O., Krenk, S., and Lind, N. C. (1986). Methods of structural safety. Prentice‐Hall, Inc., Englewood Cliffs, N.J.
17.
Monismith, C. L., and Finn, F. N. (1978). “A general analytically based approach to the design of asphalt concrete pavements.” 6th Int. Conf. on Struct. Design of Asphalt Pavements, University of Michigan, Ann Arbor, Mich., 344–365.
18.
Pell, P. S., and Cooper, K. E. (1975). “The effect of testing and mix variables on the fatigue performance of bituminous materials.” Proc., Assoc. of Asphalt Paving Technologists, 44, 1–37.
19.
Potter, J. C. (1987). “Reliability of the flexible pavement design model.” Rep., USAE Waterways Experiment Station, Vicksburg, Miss.
20.
Riggins, M., Lytton, R. L., and Garcia‐Diaz, A. (1985). “Developing stochastic flexible pavement distress and serviceability equations.” Proc., 6th Annu. Meeting, Transportation Research Board, Washington, D.C.
21.
Santucci, L. E. (1977). “Thickness design procedure for asphalt and emulsified asphalt mixes.” 4th Int. Conf. on Struct. Design of Asphalt Pavements, University of Michigan, Ann Arbor, Mich., 424–456.
22.
Shahin, M. Y., and Kohn, S. D. (1982). “Overview of the PAVER pavement management system.” Proc., 61st Annu. Meeting, Transportation Research Board, Washington, D.C.
23.
Smith, W. S. (1974). “A flexible pavement maintenance management system,” PhD thesis, University of California, Berkeley, Calif.
24.
Tvedt, L. (1990). “Distribution of quadratic forms in normal space—application to structural reliability.” J. Engrg. Mech., ASCE, 116(6), 1183–1197.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Jul 9, 1992
Published online: Jan 1, 1994
Published in print: Jan 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.