Microcomputer Model for Design and Location of Runway Exits
Publication: Journal of Transportation Engineering
Volume 119, Issue 3
Abstract
An interactive microcomputer program referred to as runway exit design interactive model (REDIM) has been developed to optimally locate and design high‐speed runway exits at airports. The model uses kinematic equations to characterize the aircraft landing dynamics and a polynomial‐time dynamic programming algorithm to find the optimal locations of the high‐speed exits. The objective of the optimization algorithm is to minimize the weighted average runway occupancy time (ROT) of an aircraft mix selected by the user. A data base of aircraft characteristics for four terminal airspace procedure (TERP) categories has been included in the model to facilitate its use in a large variety of airport environments and conditions. The data‐base file relieves the user's data‐input burden, specially when the aircraft mix consists of many different types of aircraft. The program is developed to be used as a design and a planning instrument by engineers. Hence, considerable effort has been devoted to user interface such as menu system, interactive data editing, and graphical and tabular outputs.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Airport capacity enhancement plan.” (1989). Rep., DOT/FAA/CP 88‐4, Federal Aviation Administration, Washington, D.C.
2.
Airport activity statistics of certified route air carriers‐calendar year 1989. (1990). Federal Aviation Administration, Washington, D.C.
3.
“Aviation forecast fiscal years 1992–2003.” (1992). Rep. FAA‐APO‐92‐1. Federal Aviation Administration, Washington, D.C.
4.
Harris, R. M. (1992). “Models for runway capacity analysis,” MITRE Tech. Rep. No. 4102, The MITRE Corp., McLean, Va.
5.
Horonjeff, R., Finch, D. M., Belmont, D. S., and Ahlborn, G. (1958). Exit taxiway location and design. Institute of Transportation and Traffic Engineering, Univ. of California, Berkeley, Berkeley, Calif.
6.
Horonjeff, R., Grassi, R. C., and Read, R. R. (1959). A mathematical model for locating exit taxiways. Institute of Transportation and Traffic Engineering, Univ. of California, Berkeley, Berkeley, Calif.
7.
Horonjeff, R., Read, R. R., and Ahlborn, G. (1960). Exit taxiway locations. Institute of Transportation and Traffic Engineering, Univ. of California, Berkeley, Berkeley, Calif.
8.
Joline, E. S. (1974). “Optimization of runway exit configurations.” J. Transp. Engrg. Div., ASCE, 100(2), 85–102.
9.
Koenig, S. E. (1978). “Analysis of runway occupancy times at major airports,” MITRE Rep. MTR‐7837, The MITRE Corp., McLean, Va.
10.
Lan, C. E., and Roskam, J. (1981). Airplane aerodynamics and performance, Roskam Aviation and Engineering Corp., Ottawa, Kans.
11.
Ruhl, T. A. (1990). “Empirical analysis of runway occupancy with applications to exit taxiway location and automated exit guidance,” Public‐Sector Aviation Issues, Transportation Research Record No. 1257, National Research Council, Washington, D.C.
12.
Schoem, M. L., Preston, O. W., Summer, L. G., Nelson, B. A., VanderLindon, L., and McReynolds, M. C. (1985). “Probabilistic computer model of optimal runway turnoffs.” NASA Contractor Rep. 172549. National Aeronautics and Space Administration (NASA), Washington, D.C.
13.
Sherali, H. D., Hobeika, A. G., Trani, A. A., and Kim, B. J. (1992). “An integrated simulation and dynamic programming approach for determining optimal runway exit locations.” Mgmt. Sci., 38(7), 1049–1062.
14.
Swedish, W. J. (1979). “Evaluation of the potential for reduced longitudinal spacing on final approach,” MITRE Rep. MTR‐79‐000280, The MITRE Corp., McLean, Va.
15.
Tosic, V., Teodorivic, D., and Babic, O. (1985). “Optimum runway exit location,” Transp. Plng. and Tech., 10, 135–145.
16.
Trani, A. A., Hobeika, A. G., Sherali, H. D., Kim, B. J., and Sadam, C. K. (1990). “Runway exit design for capacity improvement demonstrations (phase I),” Rep. DOT/FAA/RD‐90/32,I, Federal Aviation Administration, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Apr 1, 1991
Published online: May 1, 1993
Published in print: May 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.