Design of Rigid Overlays for Airfields
Publication: Journal of Transportation Engineering
Volume 116, Issue 4
Abstract
Current airfield overlay design generally uses empirical methods developed in the 1940s and 1950s. This paper presents a mechanistic overlay design procedure based on layered elastic theory as an alternative to the empirical design procedure. The layered elastic model is capable of analyzing layered structures with different material properties and interface conditions. It is also compatible with many current evaluation techniques using falling weight deflectometers. This mechanistic design approach includes the effects of fatigue and structural damage to the base pavement before overlay, progressive cracking of the base pavement after overlay, and substandard load transfer at joints. The proposed design procedure was checked against the results of the accelerated traffic tests originally used to develop the empirical overlay design equations, and comparative designs were also made using the proposed design procedure and the empirical equations. The proposed procedure generally gave good and reasonable comparisons with traffic test data, but the quantity of overlay test track data is limited. This analysis found that the current unbonded overlay equation is conservative; however, the partially bonded equation is not.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
AASHTO guide for design of pavement structures. (1986). Am. Association of State Highway and Transp. Officials, Washington, D.C.
2.
“Airport pavement design and evaluation.” (1978). Advisory Circular 150/5320‐6C, Federal Aviation Administration, Washington, D.C.
3.
“Design of concrete airport pavement.” (1973). Engrg. Bull. 050.03P, Portland Cement Association, Skokie, Ill.
4.
Hutchinson, R., and Wathen, T. (1962). “Strengthening existing airport pavements.” J. Aerosp. Transp. Div., 88(1).
5.
Mellinger, F. (1963). “Structural design of concrete overlays.” J. Am. Concr. Inst., 60(2), 225–236.
6.
Older, C. (1924). “Highway research in Illinois.” Trans., ASCE 87, 1209.
7.
Parker, F., et al. (1979). “Development of a structural design procedure on rigid airport pavements.” Technical Report GL‐79‐4, U.S. Army Engr. Wtrwys. Experiment Station, Vicksburg, Miss.
8.
“Pavement study: Upgrade of runway 13‐31, U.S. naval support facility, Diego Garcia, B.I.O.T. (1982). U.S. Navy Contract No. N62742‐82‐C‐0007, Lyons Assoc., Inc., Honolulu, Hawaii.
9.
“Rigid pavements for airfields.” (1988). TM 5‐825‐3, Dept. of the Army, Washington, D.C.
10.
Rollings, R. S. (1986). “Field performance of fiber reinforced concrete airfield pavements.” DOT/FAA/PM‐86/26, Federal Aviation Administration, Washington, D.C.
11.
Rollings, R. S. (1987). “Design of rigid airfield pavement overlays,” thesis presented to the University of Maryland, at College Park, Md., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
12.
Rollings, R. S. (1989). “Developments in the Corps of Engineers rigid airfield design procedures.” Fourth Int. Conf. on Concr. Pavement Design, Purdue Univ., West Lafayette, IN.
13.
Rollings, R. S., and Witczak, M. W. (1990). “A structural deterioration model for rigid airfield pavements.” J. Transp. Engrg., ASCE, 116(4), 479–491.
14.
Shahin, M., Darter, M., and Kohn, S. (1976). “Development of a pavement maintenance management system, vol. I: Airfield pavement condition rating.” Technical Report No. AFCEC‐TR‐76‐27, U.S. Air Force Civ. Engrg. Ctr., Tyndall Air Force Base, Fla.
15.
Wimsatt, A. J., and McCullough, F. B. (1989). “Subbase friction effects on concrete pavements.” Fourth Int. Conf. on Concr. Pavement Design, Purdue Univ., West Lafayette, Ind.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Jul 1, 1990
Published in print: Jul 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.