Analysis of Heavy Truck Accident Data—Exposure Based Approach
Publication: Journal of Transportation Engineering
Volume 115, Issue 3
Abstract
Measures of exposure used in accident analysis are complex and have been a topic of continuing research. There is a lack of agreement among traffic researchers as to what constitutes exposure to accident. Exposure, in its simplest form can be measured by Vehicle Miles of Travel (VMT) generated over a given facility over a specified period. The question of exposure measurement becomes more complicated when a comparison of accident data by different vehicular categories is involved. An exposure based technique, that uses the concept of “opportunity for interaction between vehicles” in measuring exposure, is presented in this paper for analyzing heavy truck accident data. Also presented is a review of current procedures for incorporating exposure factors in accident analysis. The procedure presented appears to be a viable approach for analyzing heavy truck accident data and lends itself to use of commonly available accident and VMT data.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Census of Transportation (1972, 1977, 1982). Truck Use and Inventory Survey, Bureau of Census, U.S. Department of Commerce.
2.
Carroll, P. S. (1973). “Symposium on driving exposure.” National Technical Information Service, PB 240 103/2.
3.
Chapman, R. (1973). “The concept of exposure.” Accident analysis and prevention, Vol. 5, 95–110.
4.
Donaldson, G. A. (1986). “Safety of large trucks and the geometric design of twolane, two‐way roads.” Transportation Research Record 1052, National Research Council, Washington, D.C., 10–14.
5.
Haight, F. A. (1970). “A crude framework for bypassing exposure.” J. Safety Res., 2(1).
6.
Hauer, E. (1982). “Traffic conflict and exposure.” Accident Analysis & Prevention, 14(5), 359–364.
7.
Jovanis, P. and Delleur, J. (1983). “Exposure‐based analysis of motor vehicle accidents.” Transportation Research Record 910, National Research Council, Washington, D.C., 1–7.
8.
Jovanis, P., and Chang, H. (1986). “Modeling the Relationship of accidents to miles travelled.” Transportation Research Record 1068, National Research Council, Washington, D.C., 85–89.
9.
Khasnabis, S., and Reddy, T. R. (1983). “Systematic procedure for incorporating exposure factors in truck accident analysis.” Transportation Research Record 910, National Research Council, Washington, D.C., 36–43.
10.
Khasnabis, S. (1986). “Operational and safety problems of trucks in no‐passing zones on two‐lane rural highways.” Transportation Research Record 1052, National Research Council, Washington, D.C., 36–44.
11.
Michigan Traffic Accident Facts. Michigan Department of State Police, Lansing (annual).
12.
Mitchie, J. D. (1986). “Large vehicles and roadside safety considerations.” Transportation Research Record 1052, National Research Council, Washington, D.C., 90–95.
13.
Scott, R. E., and O'Day, J. (1971). “Statistical analysis of truck accident involvements.” Highway Safety Research Institute, Univ. of Michigan, Ann Arbor, Mich.
14.
Thorpe, J. D. (1964). “Calculating relative involvement rates in accidents without determining exposure.” Australian Road Research, 4(1), 25–36.
15.
“Twin trailer trucks, effects on highways and highway safety,” (1986). Special Report 211, Transportation Research Board, National Research Council, Washington, D.C.
16.
Wolfe, A. C. (1982). “The concept of exposure to the risk of a road traffic accident and an overview of exposure data collection methods.” Accident Analysis and Prevention, 14(6), 337–340.
Information & Authors
Information
Published In
Copyright
Copyright © 1989 ASCE.
History
Published online: May 1, 1989
Published in print: May 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.