Wind Tunnel Investigations of Natural Ventilation
Publication: Journal of Transportation Engineering
Volume 110, Issue 1
Abstract
Requirements for similarity of natural ventilation in wind tunnel models and experimental methods for evaluating its effectiveness are reviewed and tested in a 1:25 wind tunnel model of the Florida Solar Energy Center Passive Cooling Laboratory (PCL). The experiments indicate that, in addition to the requirements for simulation of external flows around the building, an internal Reynolds number based on the maximum velocity and minimum dimension of each room should be larger than Internal to external velocity ratios are shown to give a detailed unbiased picture of the local internal climate. Dimensionless pressure difference coefficients, based on pressure measurements on the external envelope of the building model, and dimensionless dilution rates, based on tracer concentration decay measurements, can be used to evaluate the relative integral effectiveness of natural ventilation in different configurations. The advantages and limitations of each method, as demonstrated in the study of the PCL model, are reviewed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Cermak, J. E., “Laboratory Simulation of the Atmospheric Boundary Layer,” AIAA Journal, Vol. 9, No. 9, Sept., 1971, pp. 1746–1754.
2.
Cermak, J. E., “Applications of Wind Tunnels to Investigation of Wind‐Engineering Problems,” AIAA Journal, Vol. 17, No. 7, July, 1979, pp. 679–690.
3.
Cermak, J. E., Peterka, J. A., Ayad, S. S., and Poreh, M., “Passive and Hybrid Cooling Developments: Natural Ventilation—A Wind Tunnel Study,” FMWEP Report CER81‐82JEC24, Oct., 1981.
4.
Chandra, S., and Fairey, P. W., “Passive Cooling by Natural Ventilation: A Literature Review,” Report No. FSEC‐CR‐34‐82 (EA), Florida Solar Energy Center, 300 State Rd. 401, Cape Canaveral, Fla., 32920, Jan. 29, 1982.
5.
Cook, N. J., “Determination of the Model Scale Factor in Wind Tunnel Simulations of Adiabatic Atmospheric Boundary Layer,” Journal of Industrial Aerodynamics, Vol. 2, No. 4, 1978, pp. 321–331.
6.
Poreh, M., and Hassid, S., “Simulation of Buoyancy and Wind Induced Ventilation,” presented at the International Workshop on Wind Tunnel Modeling for Civil Engineering Applications, Gaithersburg, Md., Apr., 1982 (proceedings to be published by Cambridge University Press).
7.
Smith, E. G., “The Feasibility of Using Models for Predetermining Natural Ventilation,” Research Report #26, Texas Engineering Experiment Station, Texas A&M, June, 1951.
8.
Sundaram, T. R., Ludwig, G. R., and Skinner, G. T., “Modeling of Turbulence Structure of the Atmospheric Surface Layer,” AIAA Paper, No. 71‐136, presented at the 9th Aerospace Sciences Meeting, 1971.
9.
Vickery, B. J., “The Use of the Wind Tunnel in the Analysis of the Naturally Ventilated Structures,” Proceedings, 1981 International Passive/Hybrid Cooling Conference, Miami Beach, Fla., Nov., 1981.
10.
Wannenburg, J. J., and Van Straaten, J. F., “Wind Tunnel Tests on Scale Model Buildings as a Means for Studying Ventilation and Allied Problem,” Journal of the Institution of Heating and Ventilating Engineers, Mar., 1957, pp. 477–492.
Information & Authors
Information
Published In
Copyright
Copyright © 1984 ASCE.
History
Published online: Jan 1, 1984
Published in print: Jan 1984
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.