Finite-Strip Method for the Analysis of Cracked Plates with Application to Plate-Girder Bridges
Publication: Journal of Structural Engineering
Volume 135, Issue 2
Abstract
The finite-strip method (FSM) is one of the most efficient methods for structural analysis of bridges, reducing the time required for analysis without affecting the degree of accuracy. FSM is therefore an ideal platform for traditional time-consuming fracture analysis. This paper presents a new bending crack strip (BCS) that combines the shape functions of the spline finite strip with the eigenfunction solutions of the differential equations that govern the deflection around a crack. When this new BCS is implemented in FSM, complex three-dimensional plate structures with embedded cracks that are perpendicular to the longitudinal axis of the strips can be analyzed efficiently. The stress intensity factors of such structures can be directly computed with BCS. Extra nodal points are used around the cracked area to increase the precision of the numerical method. A substructuring technique is employed to determine the corresponding degrees of freedom of the boundary nodes, resulting in efficient analyses of cracked plates and plate-girder structures. This paper presents two examples to illustrate the accuracy and convergence rate of BCS as well as to demonstrate applications of the proposed model in the analysis of plates and plate girder bridges.
Get full access to this article
View all available purchase options and get full access to this article.
References
Anderson, T. L. (1995). Fracture mechanics fundamentals and applications, 2nd Ed., CRC, London.
Cheung, M. S., Li, W., and Chidiac, S. E. (1996). Finite strip analysis of bridges, 1st Ed., E & FN Spon, London.
Cheung, Y. K., and Jiang, C. P. (1996). “Application of the finite strip method to plane fracture problems.” Eng. Fract. Mech., 53(1), 89–96.
Committee on Fatigue and Fracture Reliability of the Committee on Structural Safety and Reliability of the Structural Division (ASCE). (1982a). “Fatigue reliability: Development of criteria for design.” J. Struct. Div., 108(1), 71–88.
Committee on Fatigue and Fracture Reliability of the Committee on Structural Safety and Reliability of the Structural Division (ASCE). (1982b). “Fatigue reliability: Introduction.” J. Struct. Div., 108(1), 3–23.
Committee on Fatigue and Fracture Reliability of the Committee on Structural Safety and Reliability of the Structural Division (ASCE). (1982c). “Fatigue reliability: Quality assurance and maintainability.” J. Struct. Div., 108(1), 25–46.
Committee on Fatigue and Fracture Reliability of the Committee on Structural Safety and Reliability of the Structural Division (ASCE). (1982d). “Fatigue reliability: Variable amplitude loading.” J. Struct. Div., 108(1), 47–69.
Cook, R. D., Malkus, D. S., and Plesha, M. E. (1989). Concepts and applications of finite element analysis, 3rd Ed., Wiley, New York.
Dexter, R. J., Wright, W. J., and Fisher, J. W. (2004). “Fatigue and fracture of steel girders.” J. Bridge Eng., 9(3), 278–286.
Diamantoudis, A. Th., and Labeas, G. N. (2005). “Stress intensity factors of semi-elliptical surface cracks in pressure vessels by global-local finite element methodology.” Eng. Fract. Mech., 72(1), 1299–1312.
Fisher, J. W. (1984). Fatigue and fracture in steel bridges: Case studies, Wiley, New York.
Hammouda, M. M. I., Fayed, A. S., and Sallam, H. E. M. (2002). “Mode II stress intensity factors for central slant cracks with frictional surfaces in uniaxially compressed plates.” Int. J. Fatigue, 24(1), 1213–1222.
Kim, Y. J., Chung, K. H., Kim, J. S., and Kim, Y. J. (2004). “Effect of biaxial loads on elastic-plastic J and crack tip constrain for cracked plates: Finite element study.” Int. J. Fract., 130(1), 803–825.
Li, S., Reid, S. R., and Soden, P. D. (1994). “A finite strip analysis of cracked laminates.” Mech. Mater., 18(1), 289–311.
Lovejoy, S. C. (2003). “Determining appropriate fatigue inspection intervals for steel bridge members.” J. Bridge Eng., 8(2), 66–72.
Roberts, R. (1977). Fracture mechanics for bridge design, Vol. 1, Federal Highway Administration, Washington, D.C.
Roddis, W. M. K., and Zhao, Y. (2003). “Finite-element analysis of steel bridge distortion-induced fatigue.” J. Bridge Eng., 5(8), 259–266.
Sih, G. C. (1973). Handbook of stress intensity factors, Leheigh Univ., Bethlehem, Pa.
Song, Z. (2004). “Fracture analysis of bridges by spline finite strip method.” Ph.D. dissertation, Univ. of Ottawa, Ottawa.
Tada, H., Paris, P. C., and Irwin, G. R. (2000). The stress analysis of cracks handbook, 3rd Ed., ASME Press, New York.
Wang, S., and Zhang, Y. (2004). “Vibration analysis of rectangular composite laminated plates using layerwise B-spline finite strip method.” Compos. Struct., 68, 349–358.
Williams, M. L. (1961). “The bending stress distribution at the base of stationary crack.” J. Appl. Mech., 28, 78–82.
Yuan, W. X., and Dawe, D. J. (2004). “Free vibration and stability analysis of stiffened sandwich plates.” Compos. Struct., 63, 123–137.
Zeng, D., Katsube, N., Zhang, J., and Soboyejo, W. (2002). “Hybrid crack-tip element and its applications.” Finite Elem. Anal. Design, 38, 319–335.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jun 12, 2006
Accepted: Sep 26, 2008
Published online: Feb 1, 2009
Published in print: Feb 2009
Notes
Note. Associate Editor: Elisa D. Sotelino
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.