Three-Dimensional Analysis of Reinforced Concrete Beam-Column Structures in Fire
Publication: Journal of Structural Engineering
Volume 135, Issue 10
Abstract
In this paper a robust nonlinear finite-element procedure is developed for three-dimensional modeling of reinforced concrete beam-column structures in fire conditions. Because of the changes in material properties and the large deflections experienced in fire, both geometric and material nonlinearities are taken into account in this formulation. The cross section of the beam column is divided into a matrix of segments and each segment may have different material, temperature, and mechanical properties. The more complicated aspects of structural behavior in fire conditions, such as thermal expansion, transient state strains in the concrete, cracking or crushing of concrete, yielding of steel, and change in material properties with temperature are modeled. A void segment is developed to effectively model the effect of concrete spalling on the fire resistance of concrete beam-column members. The model developed can be used to quantify the residual strength of spalled reinforced concrete beam-column structures in fire. A series of comprehensive validations have been conducted to validate the model. From this research, it can be concluded that the influence of transient state strains of concrete on the deflection of structures can be very significant. However, there is very little effect on the failure time of a simple structural member. The impact of concrete spalling on both the thermal and structural behaviors of reinforced concrete members is very significant. It is vitally important to consider the prospect of concrete spalling in fire safety design for reinforced concrete buildings.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ali, F. A., O’Connor, D., and Abu-Tair, A. (2001). “Explosive spalling of high-strength concrete columns in fire.” Mag. Concrete. Res., 53(3), 197–204.
Anderberg, Y., and Thelandersson, S. (1976). “Stress and deformation characteristics of concrete at high temperatures. 2: Experimental investigation and material behaviour model.” Lund Institute of Technology, Lund, Sweden.
ASCE. (1982). Finite-element analysis of reinforced concrete, ASCE, New York.
Bailey, C. G., Burgess, I. W., and Plank, R. J. (1996). “Computer simulation of a full-scale structural fire test.” Struct. Eng. 74(6), 93–100.
Barzegar-Jamshidi, F. (1987). “Nonlinear finite-element analysis of reinforced concrete under short term monotonic loading.” Ph.D. thesis, Univ. of Illinois at Urbana-Champaign, Ill.
Bathe, K. J. (1982). Finite element procedures in engineering analysis, Prentice-Hall, Englewood Cliffs, N.J.
Bathe, K. J. (1996). Finite-element procedures, Prentice-Hall, Englewood Cliffs, N.J.
Bathe, K. J., and Bolourchi, S. (1979). “Large displacement analysis of three-dimensional beam structures.” Int. J. Numer. Methods Eng., 14, 961–986.
Bratina, S., Saje, M., and Planinc, I. (2007). “The effects of different strain contributions on the response of RC beams in fire.” Eng. Struct., 29, 418–430.
British Standards Institution (BSI). (1997). “Structural use of concrete-Part 1: Code of practice for design and construction.” BS 8110–1, London.
Cai, J., Burgess, I. W., and Plank, R. J. (2002). “Modelling of asymmetric cross-section members for fire conditions.” J. Constr. Steel Res., 58, 389–412.
Capua, D. D., and Mari, A. R. (2007). “Non-linear analysis of reinforced concrete cross-sections exposed to fire.” Fire Saf. J., 42, 139–149.
Commission of the European Communities. (2004). “Design of concrete structures. Part 1.2: General rules—Structural fire design.” Eurocode 2, Brussels.
Commission of the European Communities. (2005). “Design of composite steel and concrete structures. Part 1.2: General rules—Structural fire design.” Eurocode 4, Brussels.
Ellingwood, B., and Lin, T. D. (1991). “Flexure and shear behaviour of concrete beams during fires.” J. Struct. Eng., 117(2), 440–458.
Gere, J. M., and Timoshenko, S. P. (1990). Mechanics of materials, 3rd Ed., PWS-KENT Publishing Company, Boston.
Huang, Z., Burgess, I. W., and Plank, R. J. (1999). “Non-linear analysis of reinforced concrete slabs subjected to fire.” ACI Struct. J., 96(1), 127–135.
Huang, Z., Burgess, I. W., and Plank, R. J. (2003a). “Modelling membrane action of concrete slabs in composite buildings in fire. Part I: Theoretical development.” J. Struct. Eng., 129(8), 1093–1102.
Huang, Z., Burgess, I. W., and Plank, R. J. (2003b). “A non-linear beam-column element for 3D modelling of general cross-sections in fire.” Research Rep. No. DCSE/03/F/1, Dept. of Civil and Structural Engineering, Univ. of Sheffield, Sheffield, U.K.
Huang, Z., and Platten, A. (1997). “Non-linear finite element analysis of planar reinforced concrete members subjected to fire.” ACI Struct. J., 94(3), 272–282.
Huang, Z., Platten, A., and Roberts, J. (1996). “Non-linear finite element model to predict temperature histories within reinforced concrete in fires.” Build. Environ., 31(2), 109–118.
ISO. (1985). “Fire resistance tests—Elements of building construction.” ISO 834, Geneva.
Khoury, G. A., Grainger, B. N., and Sullivan, P. J. E. (1985). “Strain of concrete during first heating to 600°C under load.” Mag. Concrete Res., 37(133), 195–215.
Lin, T. D., Ellingwood, B., and Piet, O. (1987). “Flexural and shear behaviour of reinforced concrete beams during fire tests.” Rep. No. NBS-GCR-87–536, Center for Fire Research, National Bureau of Standards, Gaithersburg, Md.
Najjar, S. R., and Burgess, I. W. (1996). “A non-linear analysis for three-dimensional steel frames in fire conditions.” Eng. Struct., 18(1), 77–89.
Rots, J. G., Kusters, G. M. A., and Blaauwendraad, J., and (1984). “The need for fracture mechanics options in finite element models for concrete structures.” Proc., Int. Conf. on Computer Aided Analysis and Design of Concrete Structures, F. Damjanic, et al., eds., Pineridge, Swansea, U.K., 19–32.
Surana, K., and Sorem, R. (1989). “Geometrically non-linear formulation for three dimensional curved beam elements with large rotations.” Int. J. Numer. Methods Eng., 28, 43–73.
Swinden Technology Centre. (1999). “The behaviour of multi-storey steel-framed buildings in fire: A European joint research programme.” British Steel plc, Rotherham, U.K.
Terro, M. J. (1998). “Numerical modeling of the behavior of concrete structures in fire.” ACI Struct. J., 95(2), 183–193.
Wong, S. Y. (2001). “The structural response of industrial portal frame structures in fire.” Ph.D. thesis, Univ. of Sheffield, Sheffield, U.K.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 135 • Issue 10 • October 2009
Pages: 1201 - 1212
Copyright
© 2009 ASCE.
History
Received: Oct 25, 2007
Accepted: May 11, 2009
Published online: Sep 15, 2009
Published in print: Oct 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.