Analytical Prediction of the Seismic Performance of Masonry Infilled Reinforced Concrete Frames Subjected to Near-Field Earthquakes
Publication: Journal of Structural Engineering
Volume 134, Issue 9
Abstract
In the recent past, a number of ground motions with large velocity pulses have been recorded in the near-field regions of earthquakes. A ground motion recorded in the near-field region of a strike-slip earthquake (i.e., near the fault rupture of the earthquake) exhibits distinctive long-period velocity pulses that are characteristic of near-field earthquakes and are not found in far-field ground motion records. The present study is based on analytical evaluation of the effect of distribution of masonry infill panels over the elevation of planar masonry-infilled RC frames on the seismic response of the frame subjected to near-field earthquakes implementing rational seismic analysis methods within the performance-based framework such as nonlinear dynamic time-history analysis and nonlinear static force-displacement (push-over) analysis using realistic and efficient computational models. Despite intense worldwide research in the area of masonry infilled frame structures during the past few decades, displacement-based nonlinear analyses of masonry infilled frames with explicit consideration of infill panels as structural elements is far from common practice, mostly due to the analytical complexity in modeling the infill panel realistically. The displacements are of particular interest from the viewpoint of performance-based design (PBD), the emerging model for the next generation of standard codes of practice for earthquake-resistant design. One of the objectives of the study is to demonstrate rational displacement-based analysis methodologies within the performance-based framework for accurately and efficiently predicting the global and local seismic demands and related intensity of seismic damage in practical masonry infilled multistory RC framed construction with seismically undesirable vertical layouts of masonry panels under the influence of near-field earthquakes.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Chaar, G., Issa, M., and Sweeney, S. (2002). “Behavior of masonry-infilled nonductile reinforced concrete frames.” J. Struct. Eng., 128(8), 1055–1065.
Anderson, J. C., and Bertero, V. V. (1987). “Uncertainties in establishing design earthquakes.” J. Struct. Eng., 113(8), 1709–1724.
ATC-40. (1996). “Seismic evaluation and retrofit of concrete buildings.” Rep. No. SSC 96-01, California Seismic Safety Commission, Applied Technology Council, Redwood, Calif.
Baber, T. T., and Noori, M. N. (1985). “Random vibration of degrading pinching systems.” J. Eng. Mech., 118(8), 1010–1026.
Barroso, L. R., Breneman, S. E., and Smith, H. A. (2002). “Performance evaluation of controlled steel frames under multi-level seismic loads.” J. Struct. Eng., 128(11), 1368–1378.
Bertero, V. V., and Brokken, S. (1983). “Infills in seismic resistant building.” J. Struct. Eng., 109(6), 1337–1361.
BIS. (2002). “Indian standard criteria for earthquake resistant design of structures. Part 1—General provisions and buildings.” IS 1893-2002, Bureau of Indian Standards, New Delhi, India.
Buonopane, S. G., and White, R. N. (1999). “Pseudodynamic testing of a masonry infilled concrete frame.” J. Struct. Eng., 125(6), 578–589.
Cavaleri, L., Fossetti, M., and Papia, M. (2005). “Infilled frames: Developments in the evaluation of cyclic behavior under lateral loads.” Struct. Eng. Mech., 21(4), 469–494.
Chandler, A. M., and Nelson, T. K. L. (2001). “Performance-based design in earthquake engineering: A multi-disciplinary review.” Eng. Struct., 23(12), 1525–1543.
Chiou, Y. J., Tzeng, J. C., and Liou, Y. W. (1999). “Experimental and analytical study of masonry infilled frames.” J. Struct. Eng., 125(10), 1109–1117.
Colangelo, F. (2003). “Experimental evaluation of member-by-member models and damage indices for infilled frames.” J. Earthquake Eng., 7(1), 25–50.
Dymiotis, C., Kappos, A. J., and Chryssanthopoulus, M. K. (2001). “Seismic reliability of masonry infilled RC frames.” J. Struct. Eng., 127(3), 296–305.
El-Dakhakhni, W. W., Elgaaly, M., and Hamid, A. A. (2003). “Three-strut model for concrete masonry-infilled steel frames.” J. Struct. Eng., 129(2), 177–185.
Flanagan, R. D., and Bennett, M. (2001). “In-plane analysis of masonry infill materials.” Pract. Period. Struct. Des. Constr., 6(4), 176–182.
Foschi, R. O., and Zhang, H. L. (2002). “Reliability and performance-based design: A computational approach and applications.” Struct. Safety, 24(2), 205–218.
Heaton, T. H., Hall, J. F., Wald, D. J., and Halling, M. W. (1995). “Response of high-rise and base-isolated buildings to a hypothetical 7.0 blind thrust earthquake.” Science, 267, 206–211.
Huang, C. H., Sung, Y. C., and Tsai, C. H. (2006). “Experimental study and modeling of masonry infilled concrete frames with and without CFRP jacketing.” Struct. Eng. Mech., 22(4), 449–467.
ICC IBC. (2000). “2000 international building code.” International Code Council, Washington, D.C.
Iwan, W. D. (1997). “Drift spectrum: Measure of demand for earthquake ground motions.” J. Struct. Eng., 123(4), 397–404.
Jones, L., Aki, K., and Boore, D. (1994). “The magnitude 6.7 Northridge California earthquake of 17 January 1994.” Science, 266(5184), 389–397.
Kunnath, S. K. (2006). “Performance-based seismic based design and evaluation of building structures.” Earthquake engineering for structural design, W. F. Chen and E. M. Lui, eds., CRC, Boca Raton, Fla.
Kurata, N., Kobori, T., and Koshika, N. (2001). “Performance-based design with semi-active control technique.” Earthquake Eng. Struct. Dyn., 31(2), 445–458.
Leelataviwat, S., Goel, S. C., and Bozidar, S. (2002). “Energy-based seismic design of structures using yield mechanism and target drift.” J. Struct. Eng., 128(8), 1046–1054.
Madan, A., Reinhorn, A. M., Mander, J. B., and Valles, R. (1997). “Modeling of masonry infill panels for structural analysis.” J. Struct. Eng., 123(10), 1295–1302.
Mander, J. B., and Nair, B. (1994). “Seismic resistance of brick-infilled steel frames with and without retrofit.” Masonry Soc. J., 12(2), 24–37.
Moghaddam, H. A. (2004). “Lateral load behavior of masonry infilled steel frames with repair and retrofit.” J. Struct. Eng., 130(1), 56–63.
Moghaddam, H. A., and Dowling, P. J. (1987). “The state of the art in infilled frames.” ESEE Research Rep. No. 87-2, Civil Engineering, Imperial College, London.
Pan, T. C., You, X. T., and Brownjohn, J. M. W. (2006). “Effect of infill walls and floor diaphragms on the dynamic characteristics of a narrow-rectangle building.” Earthquake Eng. Struct. Dyn., 35(5), 637–651.
Papia, M., Cavaleri, L., and Fossetti, M. (2003). “Infilled frames: Developments in the evaluation of the stiffening effect of the infills.” Struct. Eng. Mech., 16(6), 675–693.
Park, Y. J., Reinhorn, A. M., and Kunnath, S. K. (1987). “IDARC: Inelastic damage analysis of reinforced concrete frame-shear wall structures.” Technical Rep. No. NCEER-87-0008, National Center for Earthquake Engineering Research, SUNY Buffalo, Buffalo, N.Y.
Perera, R. (2005). “Performance evaluation of masonry infilled RC frames under cyclic loading based on damage mechanics.” Eng. Struct., 27(8), 1278–1288.
Perera, R., Gomez, S., and Alarcon, E. (2004). “Experimental and analytical study of masonry infill reinforced concrete frames retrofitted with steel braces.” J. Struct. Eng., 130(12), 2032–2039.
Roberts, M. W., and Lutes, L. D. (2003). “Potential for structural failure in the seismic near-field.” J. Eng. Mech., 129(8), 927–934.
Saineinejad, A., and Hobbs, B. (1995). “Inelastic design of infilled frames.” J. Struct. Eng., 121(4), 634–650.
Schneider, S. P., Zagers, B. R., and Abrams, D. P. (1998). “Lateral strength of steel frames with masonry infills having large openings.” J. Struct. Eng., 124(8), 896–904.
Sucuoglu, H., Turel, G., and Gunay, M. S. (2004). “Performance-based seismic rehabilitation of damaged reinforced concrete buildings.” J. Struct. Eng., 130(10), 1475–1486.
UBC. (1997). “Uniform building code 1997: Structural engineering design provisions.” International Code Council, Washington, D.C.
Valles, R. E., Reinhorn, A. M., Kunnath, S. K., Li, C., and Madan, A. (1996). “IDARC version 4.0—A program for the inelastic damage analysis of buildings.” Technical Rep. No. NCEER-96-0010, National Center for Earthquake Engineering Research, SUNY Buffalo, Buffalo, N.Y.
Yang, J. N., and Agrawal, A. K. (2002). “Semi-active hybrid control for nonlinear buildings against near-field earthquakes.” Eng. Struct., 94, 271–280.
Zalka, K. A. (2002). “Global stability analysis and structural performance of buildings braced by infilled frames.” Proc. Inst. Civ. Eng., Struct. Build., 152(3), 213–224.
Zhang, J., and Foschi, R. O. (2004). “Performance-based design and seismic reliability analysis using designed experiments and neural networks.” Probab. Eng. Mech., 19(3), 259–267.
Zhang, Y., and Iwan, W. D. (2002). “Active interaction control of tall buildings subjected to near-field ground motions.” J. Struct. Eng., 128(1), 69–79.
Zou, X. K., and Chan, C. M. (2005). “Optimal seismic performance-based design of reinforced concrete buildings using nonlinear pushover analysis.” Eng. Struct., 27(8), 1289–1302.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Dec 29, 2006
Accepted: Feb 1, 2008
Published online: Sep 1, 2008
Published in print: Sep 2008
Notes
Note. Associate Editor: Marvin W. Halling
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.