Experimental and Numerical Analysis of a Glass-to-Steel Joint
Publication: Journal of Structural Engineering
Volume 134, Issue 8
Abstract
The aim of the paper is to investigate the tensile strength of a glass pane with holes, such as that commonly used in glass-to-steel joints. Experimental tests have been conducted on a series of glass panes made of heat-strengthened and tempered glass. Since the collapse load markedly depends on the distance between the hole and the pane edge, specimens with different positions of the holes have been tested. In order to obtain reliable strength values, due to the high scatter of this quantity, five specimens have been tested for each type of pane, with a total number of 50 specimens. Interpolation curves have been proposed to predict the average failure load based on the distance between the hole and the pane edge. The experimental results have been compared with the numerical results carried out using finite-element codes obtaining good correspondence. A simple design procedure for glass-to-steel joints has then been proposed based on the evaluation of the stress intensity factor, for which some tables and interpolation functions are provided.
Get full access to this article
View all available purchase options and get full access to this article.
References
AAMA. (1984). “Structural properties of glass.” CW-12, aluminum curtain wall series.
ASTM. (2000). “Standard practice for determining the load resistance of glass in buildings.” E1300, West Conshohocken, Pa.
Beason, W. L. (1980). “A failure prediction model for window glass.” Institute for Disaster Research, Texas Tech Univ., Lubbock, Tex.
Beason, W. L., and Morgan, M. (1984). “Glass failure prediction model.” J. Struct. Eng., 110(2), 197–212.
Bohmann, D. (1999). “FEM—New ways in glass design and engineering.” Proc., Glass processing days, 84, 93.
Button, D., and Pye, B. (1993). Glass in building, Butterworth Architecture, U.K.
Comité Européen de Normalisation (CEN). (2002). “Eurocode—Basis of structural design.” EN 1990, Brusssels, Belgium.
Comité Européen de Normalisation (CEN). (2005). “Glass in building—Determination of the strength of glass panes—Part 3: General method of calculation and determination of strength of glass by testing.” prEN 13474-3, Brussels, Belgium.
Creyke, W., Sainsbury, I., and Morrell, R. (1982). Design with non-ductile materials, Applied Science Publishers Ltd., U.K.
Dodd, G. (1997). “Essential elements of bolted structural glass systems.” Proc., ICBEST ’97, 76, 92.
Fay, B. (2001). “Designing glass holes for bearing: An approach from first principles adapted for the practising structural glass engineer.” Glass processing days, 136–146.
Fischer-Cripps, A. C., and Collins, R. E. (1992). “Architectural glazings: Design standards and failure models.” Build. Environ., 30(1), 29–40.
Griffith, A. A. (1921). “The phenomena of rupture and flow in solids.” Philos. Trans. R. Soc. London, Ser. A, 221, 163–198.
Hibbit, H. D., Karlsson, B. I., and Sorensen, P. (2002). ABAQUS standard user manual, Version 6.4, Hibbit, Karlsson, and Sorensen, Inc., Providence, R.I.
HSH Ltd. (1999). Guida all’uso di Straus7, G+D Computing, Padova, Italy (in Italian).
Institution of Structural Engineers. (1999). Structural use of glass in buildings, Structural Engineers Trading Organization, London.
Irwin, G. R. (1948). “Fracture dynamics.” Proc., Fracturing of Metals ASM, Cleveland, 68, 82.
Liebowitz, H. (1968). Fracture: An advance treatise, Academic Press, New York.
Mognato, E. (2002). “Vetrate strutturali: La nuova Norma EN 13022.” Le giornate del vetro, Venice, Italy, 1–28 (in Italian).
Orowan, E. (1949). “Fracture and strength of solids.” Rep. Prog. Phys., 12, 185–192.
Orowan, E. (1955). “Energy criteria of fracture.” Weld. J. Res. Suppl., 20, 157–168.
Pilkey, W. (1997). Peterson’s stress concentration factors, 2nd Ed., Wiley, New York, 343,391.
Rice, P., and Dutton, H. (1991). Il Vetro Strutturale, Tecniche Nuove, Milan, Italy (in Italian).
Saint-Gobain (1997). Manuale tecnico del vetro, 7th Ed., Saint Gobain Vetro Italia, Milan, Itlay (in Italian).
Satoru, W. (1999). “Architectural glass as a structural element in Japan.” Glass processing days, 162, 170.
Siviero, E., and Benedetti, A. (2002). La concezione strutturale nel progetto di architettura, Editrice compositori, Bologna, Italy (in Italian).
Theocaris, P. S. (1956). “The stress distribution in a strip loaded in tension by means of a central pin.” Trans. ASME, 78, 482–493.
Wilson, P. (1999). Bearing technology in glass, Centre for Window and Cladding Technology, Bath, U.K., 53–54.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Feb 13, 2006
Accepted: May 15, 2007
Published online: Aug 1, 2008
Published in print: Aug 2008
Notes
Note. Associate Editor: Venkatesh Kumar R. Kodur
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.