Mechanics and Slenderness Limits of Sway-Restricted Reinforced Concrete Columns
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 134, Issue 8
Abstract
Several aspects of nonslender (short) column limits are considered. Such limits, below which it is acceptable to ignore local second-order effects that may cause a maximum moment to develop between member ends, are generally confined to columns of braced frames, but are also relevant for sway-restricted columns of unbraced frames. Local and global second-order effects are reviewed in this context, and the effect of global second-order effects (sway-modified moments) is discussed, and it is concluded that the end moment ratios of approximate moment magnifier expressions and slenderness limits should be expressed in terms of sway-modified end moments. The need for providing separate slenderness limits, such as in the ACI 318-05 code, for columns of nonsway and sway frames, is questioned. The ACI limits are critically reviewed and several inconsistencies pointed out with respect to their differences and different basis on which they were derived. They are compared with a more comprehensive limit that may replace both of the ACI limits, and comparisons are also made with a summary of nonlinear analysis results.
Get full access to this article
View all available purchase options and get full access to this article.
References
AISC. (2005). ANSI/AISC 360-05 specifications for structural steel buildings, Chicago.
American Concrete Institute (ACI Committee 318). (1995). “Closure to discussion of ‘Proposed revisions to building code requirements for reinforced concrete (ACI 318-89, revised 1992) and Commentary (ACI 318R-89, revised 1992).’” Concr. Int., 17(7), 87–90.
American Concrete Institute (ACI Committee 318). (2005). Building code requirements for structural concrete (ACI 318-05), and Commentary (ACI 318R-05), Farmington Hills, Mich.
Canadian Standards Association (CSA). (1984). “CAN3-A23.3-M84—Design of concrete structures.” Rexdale, Ontario, Canada.
European Committee for Standardization (CEN). (2004). “EN 1992-1-1:2004:E–Eurocode 2: Design of concrete structures—Part 1-1: General rules and rules for buildings.” Brussels, Belgium.
Ford, J. S., Chang, D. C., and Breen, J. E. (1981). “Design indications from tests of unbraced multi-panel concrete frames.” Concr. Int., 3(3), 37–47.
Galambos, T. V. (1968). Structural members and frames, Prentice-Hall, New York.
Hellesland, J. (1976). “Approximate second order analysis.” Technical Rep., Dr.ing. Aas-Jakobsen Ltd., Oslo, Norway.
Hellesland, J. (1995). “Discussion of ‘Proposed revisions to building code requirements for reinforced concrete (ACI 318-89, revised 1992) and Commentary (ACI 318R-89, revised 1992).’” Concr. Int., 17(7), 82–83.
Hellesland, J. (2000). “Discussion of ‘An improved K-factor formula’ by F. Cheong-Siat-Moy.” J. Struct. Eng., 126(5), 633–635.
Hellesland, J. (2002). “Lower slenderness limits for braced end-loaded r.c. compression members.” Res. Rep. in Mechanics No. 02-2, Mechanics Div., Univ. of Oslo, Oslo, Norway.
Hellesland, J. (2005). “Nonslender column limits for braced and unbraced reinforced concrete members.” ACI Struct. J., 102(1), 12–21.
Hellesland, J., and MacGregor, J. G. (1982). “Discussion of ‘Design indications from tests of unbraced multipanel concrete frames’ by Ford, Chang and Breen.” Concr. Int., 4(2), 55–56.
Lai, S.-M.A., and MacGregor, J. G. (1983). “Geometric non-linearities in unbraced multi-storey frames.” J. Struct. Eng., 109(11), 2528–2545.
LeMessurier, W. M. (1977). “A practical method of second order analysis.” Eng. J., 14(2), 49–67.
MacGregor, J. G. (1993). “Design of slender columns—Revisited.” ACI Struct. J., 90(3), 302–309.
MacGregor, J. G., Breen, J. E., and Pfrang, E. O. (1970). “Design of slender concrete columns.” ACI J., 67(1), 6–28.
Manuel, R. F., and MacGregor, J. G. (1967). “Analysis of restrained reinforced concrete columns under sustained loads.” ACI J., 64(3), 302–309.
Mari, A. R., and Hellesland, J. (2005). “Lower slenderness limits for rectangular reinforced concrete columns.” J. Struct. Eng., 131(1), 85–95.
Norwegian Standards Association (NSF). (1989). “NS 3473—Concrete structures. Design rules.” Oslo, Norway.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: May 8, 2007
Accepted: Feb 1, 2008
Published online: Aug 1, 2008
Published in print: Aug 2008
Notes
Note. Associate Editor: Dat Duthinh
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.