Analytical Model of Ground Motion Pulses for the Design and Assessment of Seismic Protective Systems
This article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 134, Issue 7
Abstract
In this paper, an analytical pulse model for velocity pulses observed in near-field ground motions has been proposed for a systematic design and assessment of seismic protective systems. The proposed pulse model utilizes pulse period, decay factor, and shape parameters to model both buildup and decaying phases observed in recorded ground motions. It is demonstrated that the proposed model can successfully simulate observed ground motion pulses. Peak displacement, velocity, and acceleration of the analytical pulse model are directly correlated with peak ground motion parameters and the pulse period. The response spectra and displacement reduction factor using the pulse model correlate well with those using recorded ground motions for structural periods close to or longer than the pulse period, although there is lesser correlation for shorter structural periods because of exclusion of high frequency components in the pulse model. For a base-isolated building with natural period and equipped with supplemental viscous dampers, it is demonstrated that supplemental dampers are the most effective when the structural period is close to the pulse period. Displacement reduction using supplemental passive dampers is smaller when the pulse period is longer or shorter than the structural period, although the displacement demand is quite significant.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Science Foundation Grant No. NSFCMS 0099895. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the writers and do not necessarily reflect those of the National Science Foundation.
References
Agrawal, A. K., Xu, Z., and He, W. L. (2006). “Ground motion pulse based active control of a linear base-isolated benchmark building.” J. Struct. Control and Health Monit., 13(2–3), 792–808.
Alavi, B., and Krawinkler, H. (2001). “Effects of near-fault ground motions on frames structures.” The John A. Blume Earthquake Engineering Center Research Rep. No. 138, Stanford University, Standford, Calif.
Aldridge, D. F. (1990). “The Berlag wavelet.” Geophysics, 55, 1508–1511.
Benioff, H. (1955). “Mechanism and strain characteristics of the white wolf fault as indicated by aftershock sequence, earthquakes in Kern County, California, during 1952.” Calif. Dept. Natl. Res. Div. Mines Bull., 171, 199–202.
Dyke, S. J., Caicedo, J. M., Turan, G., Bergman, L. A., and Hague, S. (2003). “Phase 1 benchmark control problem for seismic response of cable-stayed bridges.” J. Struct. Eng., 129(7), 857–872.
Federal Emergency Management Agency (FEMA). (2000). “NEHRP recommended provisions for seismic regulations for new buildings and other structures.” Rep. No. 368, Washington, D.C.
He, W. L. (2003). “Smart energy dissipation systems for protection of civil infrastructures from near-field earthquakes.” Ph.D. dissertation, The City Univ. of New York, New York.
He, W.-L., and Agrawal, A. K. (2002). “A closed-form approximation of near-fault ground motion pulses for flexible structures.” Proc., 15th ASCE Engineering Mech. Conf. (CD-ROM), New York.
He, W. L., and Agrawal, A. K. (2007). “Passive and hybrid control systems for seismic protection of a benchmark cable-stayed bridge.” J. Struct. Control and Health Monit., 14(1), 1–26.
Huang, C.-T. (2003). “Considerations of multimode structural response for near-field earthquakes.” J. Struct. Eng., 129(4), 458–467.
Iwan, W. D., and Chen, X. (1994). “Important near-field ground motion data from the Landers earthquake.” Proc., 10th European Conf. on Earthquake Engineering, Vol. 1, A. A. Balkema, Rotterdam, The Netherlands, 229–234.
Makris, N. (1997). “Rigidity-plasticity-viscosity: Can electrorheological dampers protect base-isolated structures from near-source ground motions?” Earthquake Eng. Struct. Dyn., 26, 571–591.
Makris, N., and Chang, S.-P. (2000). “Response of damped oscillators to cycloidal pulses.” J. Eng. Mech., 126(2), 123–131.
Malhotra, P. K. (1999). “Response of building to near-field pulse-like ground motions.” Earthquake Eng. Struct. Dyn., 28, 1309–1326.
Mavroeidis, G. P., and Papageorgiou, A. S. (2003). “A mathematical representation of near-fault ground motions.” Bull. Seismol. Soc. Am., 93(3), 1099–1131.
Menun, C., and Fu, Q. (2002). “An analytical model for near-fault ground motions and the response of SDOF systems.” Proc., 7th U.S. National Conf. on Earthquake Engineering (7NCEE), Earthquake Engineering Research Institute, Oakland, Calif.
Somerville, P. (1998). “Development of an improved representation of near-fault ground motions.” Proc., SMIP98 Seminar on Utilization of Strong-Motion Data, September 15, 1998, Oakland, Calif., Department of Conservation, Division of Mines and Geology, Sacramento, Calif., 1–20.
Soong, T. T., and Grigoriu, M. (1993). Random vibration of mechanical and structural systems, Prentice-Hall, Englewood Cliffs, N.J.
Tan, P., Agrawal, A. K., and Pan, Y. (2005). “Near-field effects on seismically excited highway bridge with nonlinear viscous dampers.” Bridge Struct.: Assess., Des. and Constr., 1(3), 307–318.
Tirca, L.-D., Foti, D., and Diaferio, M. (2003). “Response of middle-rise steel frames with and without passive dampers to near-field ground motions.” Eng. Struct., 25, 169–179.
Wang, Y., McFarland, D. M., Vakakis, A. F., and Bergman, L. A. (2002). “Efficacy of a nonlinear base isolation system subjected to near-field earthquake motions.” Proc., Int. Conf. on Advances and New Challenges in Earthquake Engineering Research, August 15–20, 2002, Harbin, People’s Republic of China (PRC).
Xu, Z., Agrawal, A. K., and Yang, J. N. (2006). “Semiactive and passive control of the phase I linear base-isolated benchmark building model.” Bridge Struct.: Assess., Des. and Constr., 13(2–3), 626–648.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Feb 13, 2004
Accepted: Feb 27, 2007
Published online: Jul 1, 2008
Published in print: Jul 2008
Notes
Note. Associate Editor: Michael D. Symans
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.