Design of Optimally Reinforced RC Beam, Column, and Wall Sections
Publication: Journal of Structural Engineering
Volume 134, Issue 2
Abstract
A conjugate gradient search method is coupled with a general model for the ultimate strength of a rectangular reinforced concrete (RC) cross section. Reinforcement required to provide reliable resistance identically equal to required strengths (due to factored load effects) is determined. The total reinforcement is determined optimally, either to obtain a global minimum or to obtain a minimum subject to various constraints, such as the use of equal reinforcement on opposite faces or the use of equal reinforcement on all faces. The model is useful for the design of beam, column, and wall sections that are subjected to uniaxial or biaxial bending. Solutions are obtained directly, and make use of computing power contained within spreadsheet programs that are widely available. Avoiding the somewhat tedious hand calculations and approximations required in conventional iterative design approaches avoids errors and potentially unsafe designs, while the use of optimum reinforcement quantities advances the aim of improving the sustainability of RC construction.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (1997). ACI design handbook: Design of structural reinforced concrete elements in accordance with the strength design method of ACI 318-95, ACI 340, Publication SP-17(97), Farmington Hills, Mich.
American Concrete Institute (ACI). (2005). Building code requirements for structural concrete and commentary, ACI 318, Detroit.
Aschheim, M., Hernández-Montes, E., and Gil-Martín, L. M. (2007). “Optimal domains for strength design of rectangular sections for axial load and moment according to Eurocode 2.” Eng. Struct., in press.
Bresler, B. (1960). “Design criteria for reinforced concrete columns under axial load and biaxial bending.” ACI J., 57, 481–490.
CSiCol Version 8.2.2. (2006). Computers & Structures, Inc., Berkeley, Calif.
Excel. (2003). Microsoft Office Excel 2003, Microsoft, Redmond, Wash.
Furlong, R. W., Hsu, C.-T. T., and Mirza, S. A. (2004). “Analysis and design of concrete columns for biaxial bending—Overview.” ACI Struct. J., 101(3), 413–423.
Gouwens, A. J. (1975). “Biaxial bending simplified.” Reinforced concrete columns, ACI SP-50, American Concrete Institute, Detroit, 233–261.
Hernández-Montes, E., Aschheim, M., and Gil-Martin, L. M. (2004). “The impact of optimal longitudinal reinforcement on the curvature ductility capacity of reinforced concrete column sections.” Mag. Concrete Res., 56(9), 499–512.
Hernández-Montes, E., Gil-Martín, L. M., and Aschheim, M. (2005). “The design of concrete members subjected to uniaxial bending and compression using reinforcement sizing diagrams.” ACI Struct. J., 102(1), 150–158.
Hernández-Montes, E., Gil-Martín, L. M., and Aschheim, M. (2006a). “Application of reinforcement sizing diagrams to RC design in biaxial bending.” Adv. Struct. Eng., under review.
Hernández-Montes, E., Gil-Martín, L. M., Pasadas-Fernández, M., and Aschheim, M. (2006b). “Theorem of optimal section reinforcement.” Eng. Struct., accepted for publication.
Hoffman, E. S., Gustafson, D. P., and Gouwens, A. J. (1998). Structural design guide to the ACI building code, 4th Ed., Kluwer Academic, Dordrecht, The Netherlands.
Lepage-Rodriguez, A. (1991). “Evaluacion de metodos para el diseño de columnas rectangulares de concreto armada en flexion biaxial.” Tesis de Magister en Ingeníeria Civil, Univ. Simón Bolívar, Caracas, Venzuela, in Spanish.
MacGregor, J. G., and Wight, J. K. (2005). Reinforced concrete: Mechanics and design, 4th Ed., Pearson Prentice Hall, Upper Saddle River, N.J.
Nilson, A. H., Darwin, D., and Dolan, C. W. (2004). Design of concrete structures, 13th Ed., McGraw-Hill, New York.
Nocedal, J., and Wright, S. (1999). Numerical optimization, Springer Series in Operations Research, Springer, New York.
Portland Cement Association (PCA). (2005). PCAColumn Version 3.6.4, Skokie, Ill.
Tjhin, T. N., Aschheim, M, and Wallace, J. (2001). “Performance-based seismic design of a structural wall building based on yield displacement.” Proc., 3rd US-Japan Workshop on Performance Based Earthquake Engineering Methodology for Reinforced Concrete Building Structures, Seattle.
Wallace, J. (1992). BIAX-2: Analysis of reinforced concrete and reinforced masonry sections, ⟨http://nisee.berkeley.edu/elibrary/getdoc?id=BIAX2ZIP⟩ (March 29, 2007).
Whitney, C. S., and Cohen, E. (1956). “Guide for ultimate strength design of reinforced concrete.” ACI J., 28(5), 445–490.
Ziehl, P. H., Cloyd, J. E., and Kreger, M. E. (2004). “Investigation of minimum longitudinal reinforcement requirements for concrete columns using present-day construction materials.” ACI Struct. J., 101(2), 165–175.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Aug 21, 2006
Accepted: May 30, 2007
Published online: Feb 1, 2008
Published in print: Feb 2008
Notes
Note. Associate Editor: M. Asghar Bhatti
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.