Static Strength of Thick-Walled CHS X-Joints Subjected to Brace Moment Loadings
Publication: Journal of Structural Engineering
Volume 133, Issue 9
Abstract
This paper presents results from a systematic finite-element (FE) study on the static strength of moment loaded thick-walled circular hollow section (CHS) X-joints, and compares the results with CIDECT and ISO/CD 13819-2 recommendations. For thick-walled joints subjected to brace out-of-plane bending, the CIDECT formulation excludes the dependency in the joint strength, which is different from the ISO equation and the present FE observations. The current study compares the different load paths mobilized in the X-joint under various brace loading conditions, through a detailed three-dimensional finite-element study. The numerical results reveal the significance of the joint geometric parameters and the tensile chord stress effect on the ultimate joint strength. Based on the present detailed study, a new chord stress function which incorporates the geometric dependency and the tensile chord stress effect is proposed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Boone, T. J., Yura, J. A., and Hoadley, P. W. (1982). “Chord stress effects on ultimate strength of tubular joints.” PMFSEL 82-1, Univ. of Texas at Austin, Austin, Tex.
Choo, Y. S., Qian, X. D., Liew, J. Y. R., and Wardenier, J. (2003a). “Static strength of thick-walled CHS X-joints. Part I: New approach in strength definition.” J. Constr. Steel Res., 59(10), 1201–1228.
Choo, Y. S., Qian, X. D., Liew, J. Y. R., and Wardenier, J. (2003b). “Static strength of thick-walled CHS X-joints. Part II: Effect of chord stresses.” J. Constr. Steel Res., 59(10), 1229–1250.
Dier, A. F., and Lalani, M. (1998). “New code formulation for tubular joint static strength.” Tubular Structures VIII, Proc., 8th Int. Symp. on Tubular Structures, Singapore, ISTS8, Y. S. Choo and G. J. Van der Vegte, eds., 107–116.
Gerdeen, J. C. (1980). “A critical evaluation of plastic behavior data and a united definition of plastic loads for pressure components.” Bulletin, Welding Research Council, New York.
Hibbitt, Karlsson & Sorensen Inc. (HKS). (2001). ABAQUS user’s manual, version 6.2.1, Pawtucket, R.I.
ISO/CD. (1999). “Petroleum and natural gas industries—Offshore structures—Part 2: Fixed offshore structures.” ISO/CD 13819-2.
Lu, L. H., de Winkel, G. D., Yu, Y., and Wardenier, J. (1994). “Deformation limit for the ultimate strength of hollow section joints.” Tubular Structures VI, Proc., 6th Int. Symp. on Tubular Structures, Melbourne, Australia, ISTS6, P. Grundy, A. Holgate, and B. Wong, eds., 341–348.
Pecknold, D. A., Ha, C. C., and Mohr, W. C. (1998). “Chord stress effects on ultimate strength of DT tubular joints.” Proc., 17th Int. Conf. on Offshore Mechanics and Arctic Engineering, OMAE98-0565.
Qian, X. D., Romeijn, A., Wardenier, J., and Choo, Y. S. (2002). “An automatic FE mesh generator for CHS tubular joints.” Proc., 12th Int. Offshore and Polar Engineering Conf., Y. Ueda, ed., 4, 11–18.
Schumacher, A., Nussbaumer, A., and Hirt, M. A. (2003). “Fatigue behaviour of welded CHS bridge joints: Emphasis on the effect of size.” Tubular Structure X: Proc., 10th Int. Symp. on Tubular Structures, 365–374.
Van der Vegte, G. J. (1995). “The static strength of uniplanar and multiplaner T- and X-Joints.” Doctor dissertation, Delft Univ. of Technology, Delft, The Netherlands.
Van der Vegte, G. J., Liu, D. K., Makino, Y., and Wardenier, J. (2003). “New chord load functions for circular hollow section joints.” CIDECT Rep. No. 5BK-4/03.
Van der Vegte, G. J., and Makino, Y. (2001). “The effect of chord stresses on the static strength of CHS X-joints.” Memoirs of the Faculty of Engineering, Kumamoto Univ. 46(1).
Van der Vegte, G. J., Makino, Y., Choo, Y. S., and Wardenier, J. (2001). “The influence of chord stress on the ultimate strength of axially loaded uniplanar X-joints.” Tubular Structures IX, Proc., 9th Int. Symp. on Tubular Structures, ISTS9, R. Puthli and S. Herion, eds., 165–174.
Wardenier, J. (1982). Hollow section joints, Delft University Press, Delft, The Netherlands.
Wardenier, J., Kurobane, Y., Packer, J. A., Dutta, D., and Yoemans, N. (1991). “Design guide for circular hollow section (CHS) joints under predominantly static loading.” CIDECT series: Construction with hollow steel sections, TÜV-Verlag GmbH, Köln, Germany.
Weinstein, R. M., and Yura, J. A. (1986). “The effect of chord stresses on the static strength of DT tubular connections.” Proc., Offshore Technology Conf., OTC 5135.
Yura, J. A., Zettlemoyer, N., and Edwards, I. F. (1980). “Ultimate capacity equations for tubular joints.” Proc., Offshore Technology Conf., I, OTC3690.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jun 30, 2004
Accepted: Nov 17, 2005
Published online: Sep 1, 2007
Published in print: Sep 2007
Notes
Note. Associate Editor: Brian Uy
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.