Large-Displacement Analysis of Planar RC Structures
Publication: Journal of Structural Engineering
Volume 133, Issue 4
Abstract
This paper proposes a new planar reinforced concrete (RC) formulation capable of modeling geometric and material nonlinearity. A new co-rotational sub-parametric formulation consisting of a four-noded element with quadratic hierarchic shape functions is presented. The novelty of this large-displacement-small strain element lies in the choice of the local coordinate system and the local degrees of freedom, which is mainly responsible for its simplicity and computational efficiency. For material nonlinearity, the Kotsovos and Pavlovic concrete model is used, with the addition of some numerical modifications including: (1) an accurate tangent stiffness for the nonlinear behavior of uncracked concrete; (2) a nonlinear uniaxial constitutive relationship for cracked concrete; and (3) exact cracking stress evaluation. Assuming perfect-bond, two layers of steel with only axial stiffness are smeared over the element according to their angles of orientation. Verification studies are presented to highlight the significance, limitations, and applicability of the proposed element in large displacement analysis of planar structures.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASCE, Task Committee on Finite Element Analysis of Reinforced Concrete Structures of the Structural Division Committee on Concrete and Masonary Structures. Rep. 1, “State-of-the-art report on finite element analysis of reinforced concrete structures.” Arthur H. Nilson, Chairman.
Basu, P. K., and Peano, A. (1983). “Adaptivity in -version finite element analysis.” J. Struct. Eng., 109(10), 2310–2324.
Bazant, Z. P., and Kim, S.-S. (1979). “Plastic-fracturing theory for concrete.” J. Engrg. Mech. Div., 105(3), 407–428.
Belytschko, T., and Hsieh, B. J. (1973). “Nonlinear transient finite element analysis with convected co-ordinates.” Int. J. Numer. Methods Eng., 7, 255–271.
Chen, W.-F., and Saleeb, A. F. (1994). “Constitutive equations for engineering materials. Vol. 2: Plasticity and modelling.” 2nd Ed., Elsevier, Amsterdam, Vol. 2.
Cook, R. D., Malkus, D. S., and Plesha, M. E. (1989). Concepts and applications of finite element analysis, 3rd Ed., Wiley, England, U.K.
Crisfield, M. A., and Moita, G. F. (1996). “A unified co-rotational framework for solids, shells and beams.” Int. J. Solids Struct., 33(20–22), 2969–2992.
de Borst, R. (1986). “Computational aspects of smeared crack analysis.” Computational modelling of reinforced concrete structures, E. Hinton, and R. Owen, eds., Pineridge Press, Swansea, U.K., 44–83.
Feenstra, P. H., and de Borst, R. (1995). “Constitutive model for RC.” J. Eng. Mech., 121(5), 587–595.
Gajer, G., and Dux, P. F. (1990). “Crack band based model for FEM analysis of concrete structures.” J. Struct. Eng., 116(6), 1696–1714.
Giuriani, E. (1982). “On the effective stiffness of the bar in cracked concrete.” Bond in concrete, P. Barto, ed., Applied Science, London, U.K., 107–126.
Glemberg, R., Oldenburg, M., Nilsson, L., and Samuelsson, A. (1986). “A general constitutive model for concrete structures.” Computational modelling of reinforced concrete structures, E. Hinton and R. Owen, eds., Pineridge, Swansea, U.K., 84–100.
Hsu, T. T. C. (1998). “Unified approach to shear analysis and design.” Cem. Concr. Compos., 20, 419–435.
Izzuddin, B. A. (1991). “Nonlinear dynamic analysis of framed structures.” Ph.D. thesis, Dept. of Civil Engineering, Imperial College, London.
Jetteur, P. H., and Cesscotto, S. (1991). “A mixed finite element for the analysis of large inelastic strains.” Int. J. Numer. Methods Eng., 31, 229–239.
Kotsovos, M. D., and Pavlovic, M. N. (1995). Structural concrete: Finite element analysis for limit-state design, Thomas Telford, England, U.K.
Kupfer, H. B., and Gerstle, K. H. (1973). “Behaviour of concrete under biaxial stresses.” J. Engrg. Mech. Div., 99(4), 853–866.
Ngo, D., and Scordelis, A. C. (1967). “Finite element analysis of reinforced concrete beams.” J. Am. Concr. Inst., 64(3), 152–163.
Owen, D. R. J., Figueiras, J. A., and Damjanic, F. (1983). “Finite element analysis of reinforced and prestressed concrete structures including thermal loading.” Comput. Methods Appl. Mech. Eng., 41(3), 323–366.
Phillips, D. V., and Zienkiewicz, O. C. (1976). “Finite element nonlinear analysis of concrete structures.” Proc. of the Institution of Civil Engineers, Part 2, 61, 59–88.
Siyam, A. A. F. M. (2001). “Nonlinear analysis of reinforced concrete frames and shear walls.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Imperial College, London.
Vecchio, F. J. (1990). “RC membrane element formulations.” J. Struct. Eng., 118(3), 730–750.
Vecchio, F. J. (2000). “Distributed stress field model for RC: Formulation.” J. Struct. Eng., 126(9), 1070–1077.
Yamaguchi, E., and Ohta, T. (1993). “Accurate and efficient method for analysis of RC structures.” J. Struct. Eng., 119(7), 2017–2035.
Yupu, S., and Guofan, Z. (1991). “Behaviour of deformation and strength of concrete under biaxial stresses.” China Ocean Engineering, 5(3), 347–360.
Zienkiewicz, O. C., and Taylor, R. L. (1989). The Finite element method. Vol. 1: Basic formulation and linear problems, 4th Ed., McGraw-Hill, London.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jun 28, 2002
Accepted: Sep 19, 2006
Published online: Apr 1, 2007
Published in print: Apr 2007
Notes
Note. Associate Editor: Sashi K. Kunnath
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.