Short- and Long-Term Deflections in Reinforced, Prestressed, and Composite Concrete Beams
Publication: Journal of Structural Engineering
Volume 133, Issue 4
Abstract
A model that calculates both short- and long-term deflections (i.e., transverse deflections and section rotations) in reinforced, prestressed (or posttensioned) and composite concrete beams with generalized end conditions subjected to bending about any transverse axis proposed. The effects of creep, shrinkage, and tension stiffening in the concrete and flexural rotational restraints at the beam extremes are included in the proposed model. The model is limited to beams in which torsional moments or deformations along the member are not induced by the externally applied loads or by the prestressing or posttensioning. The moment–curvature diagrams are first determined at each section in order to calculate both the transverse deflections and section rotations. The concrete stress–strain curve is modeled by: (1) a hyperbola for high-strength concrete (HSC) for the zone under compression and (2) a straight line combined with a hyperbola for the zone under tension. The stress–strain curves of the reinforcements are modeled using a modified Ramberg-Osgood function for the prestressed steel (bonded or unbonded) and a multilinear function for regular rebars and composites (like fiber-reinforced polymers (FRP) and carbon fiber-reinforced polymers (CFRP)). Five examples are included that show the effectiveness of the proposed method to predict the load–deflection behavior of reinforced, prestressed (or posttensioned), composite HSC beams, and steel-concrete composite beams.
Get full access to this article
View all available purchase options and get full access to this article.
References
ACI Committee 318. (2005). “Building code requirements for structural concrete (ACI 318-2005) and commentary (318RM-05).” American Concrete Institute, Farmington Hills, Mich.
Breckenridge, R. A., and Bugg, S. L. (1964). “Effects of long-time loads on prestressed concrete beams.” PCI J.
Collins, M. P., and Mitchell, D. (1991). Prestressed concrete structures, Prentice-Hall, Englewood Cliffs, N.J.
Cook, R. D. (1995). Finite element modeling for stress analysis, Wiley, New York.
Corley, W. G., and Sozen, M. A. (1966). “Time-dependent deflections of reinforced concrete beams.” ACI J., 63(3), 373–386.
Ghali, A., and Azarnejad, A. (1999). “Deflection prediction of members of any concrete strength.” ACI Struct. J., 96(5), 807–816.
Janney, J. R., Hognestad, E., and McHenry, D. (1956). “Ultimate flexural strength of prestressed and conventionally reinforced concrete beams.” ACI J., 52(6), 601–620.
Magura, D., Sozen, M. A., and Siess, C. P. (1964). “A study of stress relaxation in prestressing reinforcement.” PCI J., 9(2), 13–57.
Mattock, A. H. (1979). “Flexural strength of prestressed concrete sections by programmable calculator.” PCI J., 24(1), 32–54.
Mattock, A. H., and Kriz, L. B. (1961). “Ultimate strength of nonrectangular structural concrete members.” ACI J., 57(1), 737–766.
Mattock, A. H., Yamazaki, J., and Kattula, B. T. (1971). “Comparative study of prestressed concrete beams with and without bond.” ACI J., 68(2), 116–125.
Nie, J., Xiao, Y., Tan, Y., and Wang, H. (2004). “Experimental studies on behavior of composite steel high-strength concrete beams.” ACI Struct. J., 101(2), 245–251.
Popovics, S. (1970). “A review of stress-strain relationships curves for concrete.” ACI J., 67(3), 243–248.
Popovics, S. (1973). “A numerical approach to the complete stress-strain curves for concrete.” Cem. Concr. Res., 3(5), 583–599.
Pulmano, V. A., and Shin, Y. S. (1987). “Simplified finite-element analysis of deflections of reinforced concrete beams.” ACI Struct. J., 84(4), 342–348.
Razaqpur, A. G., Svecova, D., and Cheung, M. S. (2000). “Rational method for calculating deflection of fiber-reinforced polymer reinforced beams.” ACI Struct. J., 97(1), 175–184.
Rodriguez-Gutierrez, J. A., and Aristizabal-Ochoa, J. D. (1999). “Biaxial interaction diagrams for short R/C columns of any cross section.” J. Struct. Eng., 125(6), 672–683.
Rodriguez-Gutierrez, J. A., and Aristizabal-Ochoa, J. D. (2001). “ diagrams for reinforced, partially, and fully prestressed concrete columns under biaxial bending and axial load.” J. Struct. Eng., 127(7), 763–773.
Ross, C. A., Jerome, D. M., Tedesco, J. W., and Hughes, M. L. (1999). “Strengthening of reinforced concrete beams with externally bonded composite laminates.” ACI Struct. J., 96(2), 212–220.
Samra, R. M. (1997). “Time-dependent deflections of reinforced concrete beams revisited.” J. Struct. Eng., 123(6), 823–830.
Spacone, E., Filippou, F. C., and Taucer, F. F. (1996). “Fiber beam-column model for nonlinear analysis of RC frames. I: Formulation.” Earthquake Eng. Struct. Dyn., 25(7), 711–725.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression field theory for reinforced concrete elements subjected to shear.” ACI J., 83(2), 219–231.
Washa, G. W., and Fluck, P. G. (1952). “Effect of compressive reinforcement on the plastic flow of reinforced concrete beams.” ACI J., 49(2), 89–108.
Washa, G. W., and Fluck, P. G. (1956). “Plastic flow (creep) of reinforced concrete continuous beams.” ACI J., 52(5), 549–562.
Yu, W. (1959). “Instantaneous and long-time deflection of reinforced concrete beams,” Ph.D. thesis, Cornell Univ., Ithaca, New York.
Yu, W., and Winter, G. (1960). “Instantaneous and long-time deflection of reinforced concrete beams under working condition.” ACI J., 57(1), 29–50.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jun 4, 2004
Accepted: Sep 22, 2006
Published online: Apr 1, 2007
Published in print: Apr 2007
Notes
Note. Associate Editor: Tso-Chien Pan
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.