Direct Damage-Controlled Design of Concrete Structures
Publication: Journal of Structural Engineering
Volume 133, Issue 2
Abstract
The basic methods of structural concrete design that have been developed so far cannot directly control damage, either at the local or the global level. In order to develop an integrated scheme for direct damage control during design and study its application in practice, a new design philosophy, named direct damage controlled design, is proposed. In spite of the generality of the presented design philosophy, this paper focuses on the beam type of structures composed of plain concrete or other quasi-brittle materials, such as masonry or ceramics, and subjected to statically applied loading. The proposed methodology appropriately combines code-based stress-strain relations with a simple expression for damage to determine with the aid of the fiber model and the finite-element method axial force and bending moments of a beam-column element as functions of deformation and/or damage. Five characteristic numerical examples are presented to illustrate the proposed methodology and demonstrate its direct applicability to structural design.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers would like to thank Miss M. Dimitriadi for her help in connection with the typing of the manuscript.
References
Applied Technology Council (ATC). (1985). “Earthquake damage evaluation for California.” ATC 13, Redwood City, Calif.
Bathe, K. J. (1996). Finite element procedures, Prentice-Hall, Englewood Cliffs, N.J.
Bowles, J. E. (1977). Foundation analysis and design, 2nd Ed., McGraw-Hill, New York.
Cervera, M., Oliver, J., and Faria, R. (1995). “Seismic evaluation of concrete dams via continuum damage models.” Earthquake Eng. Struct. Dyn., 24(9), 1225–1245.
Di Pasquale, E., and Cakmak, A. S. (1990). “Detection of seismic structural damage using parameter-based global indices.” Probab. Eng. Mech., 5(2), 60–65.
Duan, L., and Chen, W. F. (1999). “Seismic design methodologies and performance-based criteria.” Proc., Int. Workshop on Mitigation of Seismic Effects on Transportation Structures, C. H. Loh, et al., eds., National Center for Research on Earthquake Engineering, Taipei, Taiwan, R.O.C., 130–141.
Eurocode 2. (1992). “Design of concrete structures. I: General rules and rules for buildings.” PREN 1992-1-1, European Committee on Standardization (CEN), Brussels.
FEMA. (2001). “HAZUS99 user’s manual service release 2.” Washington, D.C.
Florez-Lopez, J. (1995). “Simplified model of unilateral damage for RC frames.” J. Struct. Eng., 121(12), 1765–1772.
Hanganu, A. D., Onate, E., and Barbat, A. H. (2002). “A finite element methodology for local/global damage evaluation in civil engineering structures.” Comput. Struct., 80(20–21), 1667–1687.
Hatzigeorgiou, G. D. (2001). “Seismic inelastic analysis of underground structures by boundary and finite elements.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Patras, Patras, Greece (in Greek).
Hatzigeorgiou, G. D., Beskos, D. E., Theodorakopoulos, D. D., and Sfakianakis, M. (2001). “A simple concrete damage model for dynamic FEM applications.” Int. J. Comput. Eng. Sci., 2(2), 267–286.
Lemaitre, J. (1996). A course on damage mechanics, 2nd Ed., Springer, Berlin.
Leonhardt, F., and Monnig, E. (1973). Vorlesungen über Massivbau, Springer, Berlin (in German).
Meschke, G., Lackner, R., and Mang, H. A. (1998). “An anisotropic elastoplastic-damage model for plain concrete.” Int. J. Numer. Methods Eng., 42(4), 703–727.
Noh, S. Y., Krätzig, W. B., and Meskouris, K. (2003). “Numerical simulation of serviceability, damage evolution, and failure of reinforced concrete shells.” Comput. Struct., 81(8–11), 843–857.
Onate, E. (1997). Reliability analysis of concrete structures: Numerical and experimental studies, Monografia 107, CIMNE (Center for Numerical Methods in Engineering), Barcelona, Spain.
Park, Y.-J., and Ang, A. H.-S. (1985). “Mechanistic seismic damage model for reinforced concrete.” J. Struct. Eng., 111(4), 722–739.
Powell, G. H., and Allahabadi, R. (1988). “Seismic damage prediction by deterministic methods: Concepts and procedures.” Earthquake Eng. Struct. Dyn., 16(5), 719–734.
Priestley, M. J. N. (1997). “Displacement based seismic assessment of RC buildings.” J. Earthquake Eng., 1(1), 157–192.
Ren, W. X., and De Roeck, G. (2002a). “Structural damage identification using modal data. I: Simulation verification.” J. Struct. Eng., 128(1), 87–95.
Ren, W. X., and De Roeck, G. (2002b). “Structural damage identification using modal data. II: Test verification.” J. Struct. Eng., 128(1), 96–104.
Spacone, E., Filippou, F. C., and Tancer, F. F. (1996). “Fiber beam-column model for nonlinear analysis of R/C frames. I: Formulation.” Earthquake Eng. Struct. Dyn., 25(7), 711–725.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jun 5, 2003
Accepted: Apr 10, 2006
Published online: Feb 1, 2007
Published in print: Feb 2007
Notes
Note. Associate Editor: Dat Duthinh
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.