Strengthening of RC Continuous Beams by External Prestressing
Publication: Journal of Structural Engineering
Volume 133, Issue 2
Abstract
This paper presents the test results on 12 two-span continuous T-beams strengthened using different external tendon types and profiles and subjected to third-point loadings. Test results indicated that an increase in ultimate strength with sufficient ductility could be achieved using short tendons located over the critical sections. Such a strengthening scheme led to a more ductile beam behavior compared to those with continuous tendons over both spans or with draped tendons within each span. Parabolic tendons anchored beyond the interior support however effectively strengthened the negative moment region with improved ductility at ultimate limit state. Furthermore, beams strengthened with carbon fiber-reinforced polymers tendons showed similar response to those with steel tendons, while beams subjected to unsymmetrical loading suffered from larger deflections and lower ultimate load compared to those subjected to symmetrical loading. Theoretical predictions based on the concept of bond reduction coefficients were found to agree with the test results. Finally, a parametric study was carried out to establish design charts that can be used for the strengthening of continuous beams. A design example is presented to illustrate the use of the charts.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to acknowledge the financial assistance provided by the National University of Singapore under research Grant No. UNSPECIFIEDRP 3992699.
References
American Concrete Institute (ACI). (2002). “Building code requirements for structural concrete.” ACI 318-02 and “Commentary.” ACI 318R-02. Detroit.
Aravinthan, T., Mutsuyoshi, H., Fujioka, A., and Hishiki, Y. (1997). “Prediction of the ultimate flexural strength of externally prestressed PC beams.” Trans. Jpn. Concr. Inst., 19, 225–230.
British Standard Institution (BSI). (1997). “Structural use of concrete.” BS 8110, London.
Harajli, M. H., and Kanj, M. Y. (1991). “Ultimate flexural strength of concrete members prestressed with unbonded tendons.” ACI Struct. J., 88(6), 663–673.
Harajli, M. H., Khairallah, N., and Nassif, H. (1999). “Externally prestressed members: Evaluation of second-order effects.” J. Struct. Eng., 125(10), 1151–1161.
Naaman, A. E., and Alkhairi, F. M. (1991). “Stress at ultimate in unbonded post-tensioning tendons: Part 2—Proposed methodology.” ACI Struct. J., 88(6), 683–692.
Naaman, A. E., and Breen, J. E., eds. (1990). “External prestressing in bridges.” ACI Special Publication SP-120, American Concrete Institute, Detroit.
Tan, K. H., Naaman, A. E., Mansur, M. A., and Ng, C. K. (1997). “External prestressing in structures.” Final Rep. No. RP 930647, National Univ. of Singapore, Singapore.
Tan, K. H., and Ng, C. K. (1997). “Effects of deviators and tendon configuration on behavior of externally prestressed beams.” ACI Struct. J., 94(1), 1–10.
Tan, K. H., and Tjandra, R. A. (2003a). “Shear deficiency in reinforced concrete continuous beams strengthened with external tendons.” ACI Struct. J., 100(5), 565–572.
Tan, K. H., and Tjandra, R. A. (2003b). “Strengthening of precast concrete girder bridges by post-tensioning for continuity.” PCI J., 48(3), 56–71.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Aug 20, 2002
Accepted: Jul 31, 2006
Published online: Feb 1, 2007
Published in print: Feb 2007
Notes
Note. Associate Editor: Sashi K. Kunnath
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.