Nonprismatic Beam Element for Beams with RBS Connections in Steel Moment Frames
Publication: Journal of Structural Engineering
Volume 133, Issue 2
Abstract
This paper presents the development of a nonprismatic beam element for modeling the elastic behavior of steel beams with reduced beam section (RBS) connections. The accuracy of this element is evaluated by comparisons with finite element solutions. A simplified approach is also suggested, which uses a prismatic beam element to model beams with RBS connections. The effect of the RBS on the elastic stiffness of beams and frames is then investigated through a series of parametric studies, and by analysis of 3-, 9-, and 20-story moment frames. With a 50% flange reduction, the increase in maximum story drift ranges from 6 to 8% for typical moment frame buildings. With a 40% reduction, the increase in maximum story drift is 4.5–6%.
Get full access to this article
View all available purchase options and get full access to this article.
References
AISC. (2005a). “Seismic provisions for structural steel buildings.” ANSI/AISC 341–2005, Chicago.
AISC. (2005b). “Prequalified connections for special and intermediate steel moment frames for seismic applications.” ANSI/AISC 358–05, Chicago.
Chen, S. J., and Yeh, C. H. (1994). “Enhancement of ductility of steel beam-to-column connections for seismic resistance.” Proc., 1994 Annual Task Group Technical Session, Structural Stability Research Council, Bethlehem, Pa., 327–338.
Chambers, J. J., Almudhafar, S., and Stenger, F. (2003). “Effect of reduced beam section frame elements on stiffness of moment frames.” J. Struct. Eng., 129(3), 383–394.
Engelhardt, M. D., Winneberger, T., Zekany, A. J., and Potyraj, T. J. (1996). “The dogbone connection. Part II.” Modern Steel Constr., 36(8), 46–55.
Faggiano, B., and Landolfo, R. (2003). “Design criteria for RBS in MR frame retrofitting.” Proc., Conf. on Behavior of Steel Structures in Seismic Areas, Naples, Italy, 683–690.
Federal Emergency Management Agency (FEMA). (2000). “Recommended seismic design criteria for new steel moment-frame buildings.” FEMA 350, Washington, D.C.
Grubbs, K. V. (1997). “The effects of the dogbone connection on the elastic stiffness of steel moment frames.” Master’s thesis, Dept. of Civil Engineering, The Univ. of Texas at Austin, Austin, Tex.
Gupta, A., and Krawinkler, H. (1999). “Prediction of seismic demands for SMRFs with ductile connections and elements.” Rep. No. SAC/BD-99/06, SAC Joint Venture, Sacramento, Calif.
Hibbit, Karlsson, and Sorenson, Inc. (HKS). (1996). ABAQUS user’s manual—Vers. 5.6, Pawtucket, R.I.
Iwankiw, N. (1997). “Ultimate strength consideration for seismic design of the reduced beam section (internal plastic hinge).” Eng. J., 34(1), 3–16.
Przemieniecki, J. S. (1968). Theory of matrix structural analysis, McGraw-Hill, New York.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Aug 31, 2005
Accepted: Apr 10, 2006
Published online: Feb 1, 2007
Published in print: Feb 2007
Notes
Note. Associate Editor: James S. Davidson
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.