Random Field-Based Approach for Strength Evaluation of Suspension Bridge Cables
Publication: Journal of Structural Engineering
Volume 133, Issue 12
Abstract
A methodology is introduced to estimate the strength of suspension bridge cables using results of tensile strength tests performed on wire samples extracted from the bridge’s main cables. The innovation of the proposed methodology is to consider the spatial correlation of the wire strength over the wire’s length, a real and experimentally measured property of ductile steel wires that is disregarded in the current standard approach. The wire strength is modeled as a nonGaussian random field along its length. The number of parallel wires in the cable’s cross section is then considered to estimate the strength of the entire cable. The capabilities of the proposed methodology are demonstrated through an application involving an experimental data set of wire segments extracted from the Williamsburg Bridge. Results of the proposed methodology are compared to corresponding results of the current standard approach. It is explained why the former results are relatively more accurate than the latter. A procedure for estimating the tensile strength of a cable composed of parallel wires at different corrosion stages is also presented.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by the National Science Foundation under Grant No. NSFCMS-01-15901 with Dr. Peter Chang as Program Director.
References
Ang, A. H.-S., and Tang, W. H. (1984). Probability concepts in engineering planning and design, decision, risk, and reliability, Vol. 2, Wiley, New York.
Barton, S. C., Vermaas, G. W., Duby, P. F., West, A. C., and Betti, R. (2000). “Accelerated corrosion and embrittlement of high-strength bridge wire.” J. Mater. Civ. Eng., 12(1), 33–38.
Bažant, Z. P., and Pang, S.-D. (2007). “Activation energy based extreme value statistics and size effect in brittle and quasibrittle fracture.” J. Mech. Phys. Solids, 55(1), 91–131.
Bažant, Z. P., Vořechovský, M., and Novák, D. (2005). “Role of deterministic and statistical length scales in size effect for quasibrittle failure at crack initiation.” Proc., 9th Int. Conf. on Structural Safety and Reliability—ICOSSAR 2005, Rome, 411–415.
Benjamin, J. R., and Cornell, C. A. (1970). Probability, statistics, and decision for civil engineers, McGraw-Hill, New York.
Betti, R. (2000). “Environmental deterioration effects in bridge wires.” Research Program on Environmental and Stress Deterioration of Wires in Cables of Suspension Bridges, Columbia Univ., New York.
Camo, S. (2003). “Probabilistic strength estimates and reliability of damaged parallel wire cables.” J. Bridge Eng., 8(5), 297–311.
Deodatis, G., and Micaletti, R. C. (2001). “Simulation of highly skewed nonGaussian stochastic processes.” J. Eng. Mech., 120(12), 1284–1295.
Grigoriu, M. (1995). Applied non-Gaussian processes, Prentice-Hall, Englewood Cliffs, N.J.
Haight, R. Q., Billington, D. P., and Khazem, D. (1997). “Cable safety factors for four suspension bridges.” J. Struct. Eng., 2(4), 157–167.
Matteo, J., Deodatis, G., and Billington, D. P. (1994). “Safety analysis of suspension bridge cables: Williamsburg Bridge.” J. Struct. Eng., 120(11), 3197–3211.
National Cooperative Highway Research Program (NCHRP). (2004). “NCHRP Report 534: Guidelines for inspection and strength evaluation of suspension bridge parallel-wire cables.” Rep. No. 534, Transportation Research Board of the National Academies, Washington, D.C.
Perry, R. J. (1998). “Estimating strength of Williamsburg Bridge suspension cables.” Am. Stat., 52(3), 211–217.
Shi, Y., Deodatis, G., and Betti, R. (2004). “A novel approach for simulation of non-Gaussian fields: Application in estimating wire strengths from experimental data.” Proc., 9th Specialty Conf. on Probabilistic Mechanics and Structural Reliability, ASCE, Reston, Va.
Shi, Y., Deodatis, G., and Betti, R. (2005). “Recent developments in simulation of nonGaussian processes/fields with application in suspension cable strength estimation.” Proc., 9th Int. Conf. on Structural Safety and Reliability—ICOSSAR’05, Rome.
Shinozuka, M., and Deodatis, G. (1991). “Simulation of stochastic processes by spectral representation.” Appl. Mech. Rev., 44(4), 191–204.
Shinozuka, M., and Jan, C.-M. (1972). “Digital simulation of random processes and its applications.” J. Sound Vib., 25(1), 111–128.
Steinman, Boynton, Gronquist, and Birdsall. (1988). “Williamsburg Bridge cable investigation program: Final report.” Rep., Columbia Univ., New York.
Vořechovský, M., and Chudoba, R. (2005). “Statistical length scale for micromechanical model of multifilament yarns and size effect on strength.” Proc., 9th Int. Conf. on Structural Safety and Reliability—ICOSSAR’05, Rome, 395–401.
Yamazaki, F., and Shinozuka, M. (1988). “Digital generation of nonGaussian stochastic fields.” J. Eng. Mech., 114(7), 1183–1197.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Apr 18, 2006
Accepted: Dec 14, 2006
Published online: Dec 1, 2007
Published in print: Dec 2007
Notes
Note. Associate Editor: Shahram Sarkani
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.