Change of Weld Residual Stresses due to Loss of Material
Publication: Journal of Structural Engineering
Volume 132, Issue 12
Abstract
The loss of material due to corrosion sometimes has a large influence on the change of weld residual stresses and residual deflections of steel structures. A new finite-element method is proposed that can take into account the effects of the volume change of material. By the use of this new method, it is expected that the change of weld residual stresses and residual deflections due to loss of material can be evaluated, if only the distributions of the residual stresses and residual deflections at the initial state as well as the corrosion profiles are known in advance. In order to confirm the validity of the proposed method, an experiment is carried out to measure the change of weld residual stresses and residual deflections by mechanically forming a groove on the surface of a welded steel box column that mimics a local corrosion loss pattern. From the experiment, it is observed that the change of the weld residual stresses and residual deflections caused by the groove is well predicted by the proposed analysis method as long as the corresponding initial values of the box column without groove are known in advance.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Society of Mechanical Engineers (ASME). (1969). Criteria of the ASME boiler and pressure vessel code for design by analysis in Sections III and VIII, Division 2, New York.
Goodman, J. (1899). Mechanics applied to engineering, Longmans Green, London.
Goto, Y., and Kawanishi, N. (2003). “Rechenmethode zur einschätzung des langzeit-tragverhaltens von stahlkonstruktionen.” Stahlbau, 72, 299–306 (in German).
Goto, Y., and Kawanishi, N. (2004). “Analysis to predict long-term mechanical performance of steel structures with histories of corrosion and repair.” J. Struct. Eng., 130(10), 1578–1585.
Hibbit, Karlson, and Sorenson Inc. (HKS Inc.). (1999a). ABAQUS theory manual 5.8, Pawtucket, R.I.
Hibbit, Karlson, and Sorenson Inc. (HKS Inc.). (1999b). ABAQUS user's manual 5.8, Pawtucket, R.I.
Japan Road Association. (2002). Specification and commentary for highway bridges. Part I, Tokyo, Japan (in Japanese).
Kawanishi, N., and Goto, Y. (1999). “A method of introducing residual stresses and initial deflections in FEM analysis for steel structures.” J. Struct. Eng., 45A, 137–148 (in Japanese).
Kayser, J. R., and Nowak, A. S. (1989). “Capacity loss due to corrosion in steel-girder bridges.” J. Struct. Eng., 115(6), 1525–1537.
Kulicki, J. M., Prucz, Z., Sorgenfrei, D. F., Merts, D. R., and Young, W. T. (1990). “Guidelines for evaluating corrosion effects in existing steel bridges.” National Cooperative Highway Research Program Rep. No., 333, Transportation Research Board, National Research Council, Washington, D.C.
Paterson, D. M., and Ricles, J. M. (2004). “Cyclic behavior of patch-corroded tubular bracing.” Int. J. Steel Struct., 4(4), 263–274.
Salmon, C. H., and Johnson, E. J. (1980). Steel structures, 2nd Ed., Harper and Row, New York.
Sommer, A. M., Nowak, A. S., and Thoft-Christensen, P. (1993). “Probability-based bridge inspection strategy.” J. Struct. Eng., 119(12), 3520–3536.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jun 17, 2005
Accepted: Jan 17, 2006
Published online: Dec 1, 2006
Published in print: Dec 2006
Notes
Note. Associate Editor: Brian Uy
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.