The Void Growth Model and the Stress Modified Critical Strain Model to Predict Ductile Fracture in Structural Steels
Publication: Journal of Structural Engineering
Volume 132, Issue 12
Abstract
Material tests and analyses are presented to investigate the accuracy of two micromechanics-based continuum criteria for predicting ductile crack initiation in low-carbon steels, which are representative of mild steels used in civil engineering construction. Referred to as the stress modified critical strain (SMCS) model and the void growth model (VGM), both criteria integrate plastic strains and triaxial stresses to predict crack initiation associated with the mechanisms of void initiation, growth and coalescence. The models are suitable for implementation through finite-element analyses to simulate fracture initiation in steel structures. Material tests and finite-element analyses of seven varieties of structural steels, including two new high-performance steels, are conducted to validate and calibrate the model parameters for practical structural engineering applications. Both models are shown to predict fracture accurately across the spectrum of steel samples and geometric configurations. However, application of the models to situations with high stress and strain gradients is shown to be quite sensitive to the characteristic length parameter of the models, which leads to large model variability in such cases. A strong empirical relationship between Charpy V-notch upper-shelf energy and the SMCS and VGM parameters is observed, which can be utilized to estimate the model parameters.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper is based upon research supported by the National Science Foundation under the U.S.–Japan Cooperative Research for Urban Earthquake Disaster Mitigation initiative (Grant No. NSFCMS 9988902). The advice and guidance provided by Robert Dodds (University of Illinois), and Reiner Dauskardt (Stanford University) are gratefully acknowledged. Additional support was provided by the Steel Structures Development Center of the Nippon Steel Corporation (Futtsu, Japan), which provided steel materials, machining services, and fracture data, and by donations of steel material from the Garry Steel Company (Oakland, Calif.) and the ATLSS Engineering Research Center (Bethlehem, Pa.).
References
Anderson, T. L. (1995). Fracture mechanics, 2nd Ed., CRC, Boca Raton, Fla.
ASTM. (1997). “Standard test method for the measurement of fracture toughness.” E1820-01, West Conshohoken, Pa.
ASTM. (2005a). “Standard test method for notched bar impact testing of metallic materials.” E23-05, West Conshohoken, Pa.
ASTM. (2005b). “Standard test method for tension testing of metallic materials.” E8-04, West Conshohoken, Pa.
Bandstra, J. P., Koss, D. A., Geltmacher, A., Matic, P., and Everett, R. K. (2004). “Modeling void coalescence during ductile fracture of a steel.” Mater. Sci. Eng., A, 366(2), 269–281.
Barsom, J. M., and Rolfe, S. T. (1987). Fracture and fatigue control in structures—Applications of fracture mechanics, Prentice-Hall, Englewood Cliffs, N.J.
Benzerga, A. A., Besson, J., and Pineau, A. (2004). “Anisotropic fracture. Part II: Theory.” Acta Mater., 52(15), 4639–4650.
Chi, W-M. (2000). “Prediction of steel connection failure using computational fracture mechanics.” Ph.D. thesis, Stanford Univ., Stanford, Calif.
Chi, W-M., Kanvinde, A. M., and Deierlein, G. G. (2006). “Prediction of ductile fracture in steel connections using SMCS criterion.” J. Struct. Eng., 132(2), 171–181.
El-Tawil, S., Vidarsson, E., Mikesell, T., and Kunnath, S. K. (1999). “Inelastic behavior and design of steel panel zones.” J. Struct. Eng., 125(2), 183–193.
Federal Emergency Management Agency (FEMA). (2000). “Recommended design criteria for new steel moment-frame buildings.” FEMA-350, Washington, D.C.
Hancock, J. W., and Brown, D. K. (1983), “On the role of strain and stress state in ductile failure.” J. Mech. Phys. Solids, 31(1), 1–24.
Hancock, J. W., and Mackenzie, A. C. (1976). “On the mechanics of ductile failure in high-strength steel subjected to multi-axial stress-states.” J. Mech. Phys. Solids, 24(3), 147–169.
User’s Manual, Version 5.8, (1998). ABAQUS, Hibbitt, Karlsson, and Sorensen, Inc., (HKS, Inc.). Providence, R.I.
Johnson, G. B., and Cook, W. H. (1985). “Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures.” Eng. Fract. Mech., 21(1), 31–48.
Kanvinde, A., and Deierlein, G. G. (2004). “Micromechanical simulation of earthquake induced fractures in steel structures.” Blume Center TR145, ⟨http://blume.stanford.edu⟩ Stanford Univ., Stanford, Calif.
Marini, B., Mudry, F., and Pineau, A. (1985). “Experimental study of cavity growth in ductile rupture.” Eng. Fract. Mech., 22(6), 989–996.
McClintock, F. A. “A criterion for ductile fracture by the growth of holes.” Proc., ASME Meeting APM-14, American Society of Mechanical Engineers, June 12–14, 1968 .
McMeeking, R. M., and Parks, D. M. (1979). “On criteria for -dominance of crack-tip fields in large scale yielding.” Elastic-plastic fracture, ASTM STP 668, ASTM, West Conshohoken, Pa., 175–194.
Norris, D. M., Jr., Reaugh, J. E., Moran, B., and Quinones, D. F. (1978). “A plastic-strain, mean-stress criterion for ductile Fracture.” J. Eng. Mater. Technol., 100(3), 279–286.
Panontin, T. L., and Sheppard, S. D. (1995). “The relationship between constraint and ductile fracture initiation as defined by micromechanical analyses.” Fracture mechanics: 26th Volume, ASTM STP 1256, ASTM, West Conshohoken, Pa., 54–85.
Pardoen, T., and Hutchinson, J. W. (2000). “An extended model for void growth and coalescence.” J. Mech. Phys. Solids, 48(12), 2467–2512.
Rice, J. R. “Path independent integral and the approximate analysis of strain concentration for notches and cracks.” Proc., ASME Meeting APM-31, American Society of Mechanical Engineers, June 12–14, 1968 .
Rice, J. R., and Tracey, D. M. (1969). “On the ductile enlargement of voids in triaxial stress fields.” J. Mech. Phys. Solids, 17(3), 201–217.
Rousselier, G. (1987). “Ductile fracture models and their potential in local approach of fracture.” Nucl. Eng. Des., 105(1), 113–120.
Stojadinovic, B., Goel, S., and Lee, K. H. (2000). “Development of post-Northridge steel moment connections.” Proc., 12th World Conf. on Earthquake Engineering, New Zealand, Paper No. 1269.
Tremblay, R., Archambault, M.-H., and Fillatrault, A. (2003). “Seismic response of concentrically braced steel frames made with rectangular hollow bracing members.” J. Struct. Eng., 129(12), 1626–1636.
Uriz, P., and Mahin, S. A. (2004). “Seismic performance assessment of concentrically braced steel frames.” Proc., 13th World Conf. on Earthquake Engineering, Vancouver, Canada, Paper No. 1639.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Sep 23, 2005
Accepted: Feb 27, 2006
Published online: Dec 1, 2006
Published in print: Dec 2006
Notes
Note. Associate Editor: Benjamin W. Schafer
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.