Structural Monitoring and Integrity Assessment of Medieval Towers
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 132, Issue 11
Abstract
This investigation concerns the structural stability of two medieval buildings, “Torre Sineo” and “Torre Astesiano,” rising in the center of Alba, a characteristic town in Piedmont, Italy. The geometrical and structural aspects of these masonry towers were analyzed and tests were performed to assess the evolution of damage phenomena. The slant of the towers was determined with the customary topographic survey methods. Nondestructive testing methods were used, instead, to determine the extent of damage and cracking and to assess the evolution of these phenomena over time. The damage processes underway in some portions of the masonry were monitored using the acoustic emission (AE) technique. The latter method makes it possible to estimate the amount of energy released during the fracture process and to obtain information on the criticality of ongoing processes. Finally, an ad hoc theory based on fractal concepts for assessing the stability of masonry structures from the data obtained with the AE technique is proposed.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The present research was carried out with the financial support of the Ministry of University and Scientific Research (MIUR) and of the European Union (EU). The writers would like to thank Architects Massimo Aprile and Luigi Bacco for the technical support provided in the structural monitoring.
References
Anzani, A., Binda, L., and Mirabella Roberti, G. (2000). “The effect of heavy persistent actions into the behavior of ancient masonry.” Mater. Struct., 33, 251–261.
ASTM. (1991a). “Standard test method for in situ compressive stress within solid unit masonry estimated using flat-jack measurements.” ASTM C1196-91, Philadelphia.
ASTM. (1991b). “Standard test method for in situ measurement of masonry deformability properties the using flat-jack method.” ASTM C1197-91, Philadelphia.
Brindley, B. J., Holt, J., and Palmer, I. G. (1973). “Acoustic emission. III: The use of ring-down counting.” Non-Destr. Test., 6(5), 299–306.
Carpinteri, A., and Bocca, P. (1991). Damage and diagnosis of materials and structures, Pitagora Editrice, Bologna, Italy.
Carpinteri, A., Invernizzi, S., and Lacidogna, G. (2005). “In situ damage assessment and nonlinear modeling of an historical masonry tower.” Eng. Struct., 27, 387–395.
Carpinteri, A., and Lacidogna, G. (2002). “Structural monitoring and diagnostics by the acoustic emission technique: Scaling of dissipated energy in compression.” Proc., 9th Int. Congress on Sound and Vibration (ICSV9), Orlando, Fla., Paper No. 166.
Carpinteri, A., and Lacidogna, G. (2003). “Damage diagnosis in concrete and masonry structures by acoustic emission technique.” J. Facta Univ., 3(13), 755–764.
Carpinteri, A., and Lacidogna, G. (2006). “Damage monitoring of a masonry building by the acoustic emission technique.” Mater. Struct., in press.
Carpinteri, A., Lacidogna, G., and Pugno, N. (2003). “Acoustic emission during fragmentation of quasi-brittle materials in compression.” Proc., 16th AIMETA Congress of Theoretical and Applied Mechanics, Ferrara, Italy, Paper No. 119.
Carpinteri, A., Lacidogna, G., and Pugno, N. (2004). “Damage diagnosis and lifetime assessment of concrete and masonry structures by an acoustic emission technique.” Proc., 5th Int. Conf. on Fracture Mechanics of Concrete and Concrete Structures (FraMCos-5), Vail, Colorado, V. C. Li, C. K. Y. Leung, K. J. Willam, and S. L. Billington, eds., International Association for Fracture Mechanics of Concrete and Concrete Structures, 31–40.
Carpinteri, A., and Pugno, N. (2002a). “Fractal fragmentation theory for shape effects of quasi-brittle materials in compression.” Mag. Concrete Res., 54(6), 473–480.
Carpinteri, A., and Pugno, N. (2002b). “A fractal comminution approach to evaluate the drilling energy dissipation.” Int. J. Numer. Analyt. Meth. Geomech., 26(5), 499–513.
Carpinteri, A., and Pugno, N. (2003). “A multifractal comminution approach for drilling scaling laws.” Powder Technol., 131(1), 93–98.
Holroyd, T. (2000). The acoustic emission and ultrasonic monitoring handbook, Coxmoor, Oxford, U.K.
Kapiris, P. J., Balasis, G. T., Kopanas, J. A., Antonopoulos, G. N., Peratzakis, A. S., and Eftaxias, K. A. (2004). “Scaling similarities of multiple fracturing of solid materials.” Nonlinear Processes Geophys., 11, 137–151.
Kaiser, J. (1950). “An investigation into the occurrence of noises in tensile tests, or a study of acoustic phenomena in tensile tests.” Ph.D. dissertation, Technische Hochschule München, Munich, Germany.
Ohtsu, M. (1996). “The history and development of acoustic emission in concrete engineering.” Mag. Concrete Res., 48(177), 321–330.
Pollock, A. A. (1973). “Acoustic emission. II: Acoustic emission amplitudes.” Non-Destr. Test., 6(5), 264–269.
Richter, C. F. (1958). Elementary seismology, W. H. Freeman, San Francisco.
Shah, S. P., and Li, Z. (1994). “Localization of microcracking in concrete under uniaxial tension.” ACI Mater. J., 91(4), 372–381.
Shcherbakov, R., and Turcotte, D. L. (2003). “Damage and self-similarity in fracture.” Theor. Appl. Fract. Mech., 39(3), 245–258.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Dec 17, 2004
Accepted: Mar 8, 2006
Published online: Nov 1, 2006
Published in print: Nov 2006
Notes
Note. Associate Editor: Ahmet Emin Aktan
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.