Stability and Ductility of Thin-Walled Circular Steel Columns under Cyclic Bidirectional Loading
Publication: Journal of Structural Engineering
Volume 132, Issue 10
Abstract
A cyclic bidirectional loading experiment is carried out to examine the ultimate seismic behavior of thin-walled circular steel columns by using an accurate three-dimensional (3D) experimental system recently developed by the writers. This experimental system is characterized by its unique 3D hinge and 3D transducer that are employed to apply accurate 3D force components to the top of columns by considering geometrical nonlinearity precisely. Cyclic circular loads are adopted as virtually the severest bidirectional horizontal loads for circular columns. From the experimental results, it is observed that the strength and ductility of the columns decrease considerably under the cyclic circular loads, compared with those under the conventional cyclic unidirectional loads. The experimental results are also used to confirm the validity of the nonlinear finite element method (FEM) shell analysis where a three-surface cyclic plasticity constitutive model is implemented after modifying the original three-surface model to consider the behavior under large plastic strain. With the extensive numerical results obtained from the nonlinear FEM analysis, empirical prediction equations are derived to evaluate the strength and ductility of thin-walled circular steel columns under the cyclic circular load with one loading cycle.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS/STANDARD user’s manual, Version 5.8. (1998). HKS Inc., Pawtucket, R.I.
Cofie, N. G., and Krawinkler, H. (1985). “Uniaxial cyclic stress-strain behavior of structural steel.” J. Eng. Mech., 111(9), 1105–1120.
Dafalias, Y. F., and Popov, E. P. (1976). “Plastic internal variables formalism of cyclic plasticity.” J. Appl. Mech., 43, 645–651.
ECCS. (1986). “Recommended testing procedure for assessing the behavior of structural steel elements under cyclic load.”
Fujimoto, T., Mukai, A., Nishiyama, K., Nozaki, K., and Morino, S. (2000). “Biaxial bending behavior of concrete filled square steel tubular stub columns using high strength materials.” J. Struct. Constr. Eng., 527, 178–180 (in Japanese).
Gao, S., Usami, T., and Ge, H. B. (1998). “Ductility evaluation of steel piers with pipe-sections.” J. Eng. Mech., 124(3), 260–267.
Goto, Y., Wang, Q. Y., and Obata, M. (1998). “FEM analysis for hysteretic behavior of thin-walled columns.” J. Struct. Eng., 124(11), 1290–1301.
Iwan, W. D. (1967). “On a class of model for the yielding behavior of continuous and composite system.” J. Appl. Mech. Trans. ASME., 34, 612–617.
Japan Road Association (2002). “Specification for road bridges and commentaries: V. Seismic design.” Tokyo (in Japanese).
Jiang, L., Goto, Y., and Obata, M. (2002). “Hysteretic modeling of thin-walled circular steel columns under biaxial bending.” J. Struct. Eng., 128(3), 319–327.
JSCE Subcommittee on Investigation of Seismic Damage of Steel Structure. (2000). “Investigation of causes of damage to steel structure on Hanshin-Awaji Earthquake Disaster.” J. Struct. Mech. Earthquake Engrg, JSCE, 647(1–51), 17–30 (in Japanese).
Loret, B., and Prevost, J. H. (1986). “Accurate numerical solutions of Drucker–Prager elastic-plastic modes.” Comput. Methods Appl. Mech. Eng., 54, 259–278.
Malvern, L. E. (1969). Introduction to the mechanics of a continuous media, Prentice-Hall, Englewood Cliffs, N.J.
Mroz, Z. (1967). “On the description of anisotropic work hardening.” J. Mech. Phys. Solids, 15, 163–175.
Obata, M., and Goto, Y. (2004). “Development of 3D pseudo-dynamic experiment system for bridge piers and columns.” J. Struct. Mech. Earthquake Eng., JSCE, No. 753/I-66, 253–266 (in Japanese).
Public Work Research Institute et al. (1997–2000 ). “Reports of cooperative research on limit state seismic design for bridge piers ( , Summary).” Japan (in Japanese).
Saatcioglu, M., and Ozcebe, G. (1989). “Response of reinforced concrete columns to simulate seismic loading.” ACI Struct. J., 86(1), 3–12.
Sfakianakis, M. G., and Fardis, M. F. (1991). “RC column model for inelastic seismic response analysis in 3D.” J. Eng. Mech., 117(12), 2770–2787.
Shen, C., Mizuno, E., and Usami, T. (1993). “Development of a cyclic two-surface model for structural steels with yield plateau.” NUCE Research Rep. No. 9302, Dept. of Civil Engineering Nagoya Univ., Nagoya, Japan.
Takizawa, H., and Aoyama, H., (1976). “Biaxial effect inmodeling response of R/C structures.” Earthquake Eng. Struct. Dyn., 4, 523–552.
Watanabe, E., Sugiura, K., and Oyawa, W. (2000). “Effects of multi-directional displacement paths on the cyclic behavior of rectangular hollow steel columns.” J. Struct. Mech. Earthquake Eng., JSCE, 647(1–51), 69–85.
Wong, Y. L., Paulay, T., and Nigel Priestley, J. N. (1993). “Response of circular reinforced concrete columns to multi-directional seismic attack.” ACI Struct. J., 90(2), 180–191.
Zahn, F. A., Park, R., and Priestley, M. J. N. (1989). “Strength and ductility of square reinforced column subjected to biaxial bending.” ACI Struct. J., 56(2), 123–131.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Aug 10, 2004
Accepted: Jan 3, 2006
Published online: Oct 1, 2006
Published in print: Oct 2006
Notes
Note. Associate Editor: Sherif El-Tawil
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.