Long-Term Behavior of Timber–Concrete Composite Beams. I: Finite Element Modeling and Validation
This article is a reply.
VIEW THE ORIGINAL ARTICLEThis article has a reply.
VIEW THE REPLYPublication: Journal of Structural Engineering
Volume 132, Issue 1
Abstract
This first part of two companion papers deals with the numerical modeling of timber–concrete composite beams (TCCs) under long-term loading. All phenomena affecting the long-term behavior of timber, concrete, and the connection system, such as creep, mechanosorptive creep, shrinkage/swelling, and temperature variations, are fully considered. The structural problem is solved through a uniaxial finite element model with flexible connection and a step-by-step numerical procedure over time. The important role played by the environmental thermohygrometric variations on TCCs is highlighted through some analyses. The proposed numerical procedure is validated on two long-term experimental tests in outdoor conditions. Despite some uncertainties in environmental conditions and material properties, a good fit between experimental and numerical results is obtained. A parametric analysis is performed in the second part, showing the contribution of different rheological phenomena and thermohygrometric variations on beam deflection and connection slip. Based on results carried out, a simplified approach for long-term evaluation of TCCs is then proposed.
Get full access to this article
View all available purchase options and get full access to this article.
References
Amadio, C., and Fragiacomo, M. (1993). “A finite element model for the study of creep and shrinkage effects in composite beams with deformable shear connections.” Costruzioni Metalliche, 4, 213–228.
Amadio, C., Fragiacomo, M., Ceccotti, A., and Di Marco, R. (2001). “Long-term behaviour of a timber-concrete connection system.” Proc., RILEM Conf. “Joints in timber structures,” Stuttgart, Germany, 263–272.
Ballerini, M., Crocetti, R., and Piazza, M. (2002). “An experimental investigation on notched connections for timber-concrete composite structures.” Proc., 7th World Conf. on Timber Engineering, WCTE 2002, Shah Alam, Malaysia, 2, 171–178.
Balogh, J., Gutkowski, R. M., Wieligmann, M., and Haller, P. (2002). “Mechanics behavior of dowel connections for partially composite wood-concrete beams.” Proc., 7th World Conf. on Timber Engineering, WCTE 2002, Shah Alam, Malaysia, 3, 290–295.
Bonamini, G., Ceccotti, A., and Uzielli, L. (1990). “Short- and long-term experimental tests on antique larch and oak wood-concrete composite elements.” Proc., C.T.E. Conf., Bologna, Italy, 241–251 (in Italian).
Capretti, S. (1992). “Time dependent analysis of timber and concrete composite (TCC) structures.” Proc., RILEM Int. Symp. on Behaviour of Timber and Concrete Composite Load-Bearing Structures, Ravenna, Italy.
Capretti, S., and Ceccotti, A. (1996). “Service behaviour of timber-concrete composite beams: A 5-year monitoring and testing experience.” Proc., Int. Wood Engineering Conf., New Orleans, 3, 443–449.
Comité Euro-International du Béton (CEB). (1993). “CEB-FIP Model Code 90.” CEB Bull. No. 213/214, Lausanne, Switzerland.
Comité Européen de Normalisation (CEN). (1995). “Eurocode 5—Design of timber structures—Part 1-1: General Rules and Rules for Buildings.” ENV 1995-1-1, Bruxelles, Belgium.
Comité Européen de Normalisation (CEN). (1996). “Eurocode 5—Design of Timber Structures—Part 2: Bridges.” ENV 1995-2, Bruxelles, Belgium.
Comité Européen de Normalisation (CEN). (2003). “Eurocode 5—Design of Timber Structures—Part 1-1: General Rules and Rules for Buildings.” prEN 1995-1-1, Bruxelles, Belgium.
Fragiacomo, M. (2000). “Long-term behavior of timber-concrete composite beams.” PhD thesis, Univ. of Trieste, Trieste, Italy (in Italian).
Fragiacomo, M. (2005). “A finite element model for long-term analysis of timer-concrete composite beams.” Struct. Eng. Mech., 20(2), 173–189.
Giordano, G. (1999). Technique of timber constructions, Hoepli Editore S.p.A., Milan, Italy (in Italian).
Götz, K.-H., Hoor, D., Möhler, K., and Natterer, J. (1983). Costruire en bois: Choisir, Concevor, Réaliser, Editions du Moniteur, Presses Polytechniques Romandes, Lausanne, Switzerland (in French).
Hanhijärvi, A., and Hunt, D. (1998). “Experimental indication of interaction between viscoelastic and mechano-sorptive creep.” Wood Sci. Technol., 32, 57–70.
Hoffmeyer, P. (1995). “Wood as a building material.” Timber Engineering, Step 1, 1st Ed., Centrum Hout, The Netherlands, A4/1–A4/21.
Kenel, A., and Meierhofer, U. (1998). “Long-term performance of timber-concrete composite structural elements.” Rep. No. 115/39, EMPA, Dübendorf, Switzerland (in German).
Kuhlmann, U., and Schänzlin, J. (2001). “Composite of vertically laminated timber decks and concrete.” Proc., IABSE Conf. on Innovative Wooden Structures and Bridges, Lahti, Finland, 507–512.
Lacidogna, G. (1994). “Mathematical modeling of the viscoelastic behavior of concrete.” PhD thesis, Polytechnic of Turin, Italy (in Italian).
Mårtensson, A. (1992). “Mechanical behaviour of wood exposed to humidity variations.” Rep. TVBK–1006, Lund Institute of Technology, Lund, Sweden.
Newmark, N. M., Siess, C. P., and Viest, I. M. (1951). “Tests and analysis of composite beams with incomplete interaction.” Proc., Society for Experimental Stress Analysis, 9(1), 75–92.
Ranta Maunus, A. (1975). “The viscoelasticity of wood at varying moisture content.” Wood Sci. Technol., 9, 189–205.
Said, E. B., Jullien, J.-F., and Siemers, M. (2002). “Non-linear analyses of local composite timber-concrete behaviour.” Proc., 7th World Conf. on Timber Engineering, WCTE 2002, Shah Alam, Malaysia, 1, 183–191.
Toratti, T. (1992). “Creep of timber beams in a variable environment.” Rep. No. 31, Helsinki Univ. of Technology, Helsinki, Finland.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jul 8, 2003
Accepted: May 16, 2005
Published online: Jan 1, 2006
Published in print: Jan 2006
Notes
Note. Associate Editor: Enrico Spacone
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.