Fatigue Strength of Intersecting Attachments
Publication: Journal of Structural Engineering
Volume 131, Issue 6
Abstract
Experimental investigations are carried out on intersecting attachments to investigate their fatigue strengths. Two types of intersecting attachments are studied, i.e., the T type with one longitudinal attachment intersecting a transverse stiffener at one end, and the H type with a longitudinal attachment intersecting two transverse stiffeners at both ends. The length of the longitudinal attachment in the T type is changed to study its effects on fatigue strength. The scalloped version of the specimens, free of welds at the intersection of the transverse and longitudinal attachments, is also investigated. Test results show that the fatigue strength of the T type attachment is comparable to that of the single longitudinal attachment. The fatigue strength of the H type attachment is in between those of the single longitudinal and transverse attachments. The introduction of the scallops does not influence fatigue strength significantly, but results in a change in the locations of fatigue cracks in the H type attachments. The method suggested by the writers for fatigue strength evaluation of weld toe failures is demonstrated as suitable for evaluating fatigue strength of intersecting attachments.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
This research is supported by the Ministry of Education, Science, Sports and Culture of Japan, Grant-in-Aid for Scientific Research (B), 50109310, 2002.
References
Abtahi, A., Albrecht, P., and Irwin, G. R. (1976). “Fatigue of periodically overloaded stiffener detail.” J. Struct. Div. ASCE, 102(11), 2103–2119.
American Association of State Highway and Transportation Officials (AASHTO). (1996). Standard specifications for highway bridges, 16th Ed., American Association of State Highway Officials, Washington, D.C.
Hobbacher, A. (1996). Recommendations on fatigue of welded components. IIW document XIII-1539-96/XV-845-96, International Institute of Welding.
Japanese Industrial Standard (JIS). (1999). “Rolled steels for welded structure.” JIS G 3106: 1999. Revised 1999-01-20, Japanese Standards Association (in Japanese).
Japanese Society of Steel Construction (JSSC). (1995). “Fatigue design recommendations for steel structures [English version].” JSSC Technical Rep. No. 32, Tokyo.
Metrovich, B., Fisher, J. W., Yen, B. T., Kaufmann, E. J., Cheng, X., and Ma, Z. (2003). “Fatigue strength of welded AL-6XN superaustenitic stainless steel.” Int. J. Fatigue, 25(11), 1309–1315.
Morgan, M. R., and Lee, M. M. K. (1998). “Stress concentration factors in tubular K-joints under in-plane moment loading.” J. Struct. Eng., 124(4), 382–390.
Structural Research and Analysis Corporation (SRAC). (2000). “Cosmos/M user’s guide.”
van Wingerde, A. M., Packer, J. A., and Wardenier, J. (1995). “Criteria for the fatigue assessment of hollow structural section connections.” J. Constr. Steel Res., 35(1), 71–115.
Xiao, Z. G., and Yamada, K. (2004). “A method of determining geometric stress for fatigue strength evaluation of steel welded joints.” Int. J. Fatigue, 26(12), 1277-1293.
Yamada, K., Kato, S., Okabe, A., Kim, I. T., and Ojio, T. (2001a). “Fatigue test of tensile plate with out-of-plane gussets inclined to applied stress.” J. Struct. Eng., JSCE, 47(A), 1039–1045 (in Japanese).
Yamada, K., and Kikuchi, Y. (1984). “Fatigue tests of weathered welded joints.” J. Struct. Eng., 110(9), 2164–2177.
Yamada, K., Kim, I. T., and Ito, K. (2001b). “Fatigue behavior of inclined nonload-carrying fillet welded joints.” J. Struct. Mech. Earthquake Eng., JSCE, 682/I-56, 383–390 (in Japanese).
Yamada, K., Xiao, Z. G., Kim, I. T., and Tateishi, K. (2002). “Re-analysis of fatigue test data of attachments based on stress at fillet weld toe.” J. Struct. Eng., JSCE, 48(A), 1047–1054 (in Japanese).
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Oct 21, 2003
Accepted: Nov 12, 2004
Published online: Jun 1, 2005
Published in print: Jun 2005
Notes
Note. Associate Editor: Brian Uy
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.