Flexural–Torsional Buckling of Columns with Oblique Eccentric Restraints
Publication: Journal of Structural Engineering
Volume 131, Issue 11
Abstract
This paper is concerned with the elastic flexural–torsional buckling of concentrically loaded columns with oblique eccentric restraints. Oblique flexural restraints may resist deflections as well as flexural rotations, while torsional restraints may resist twist rotations and warping. Flexural restraints may act at the shear center or may be eccentric. Restraints may be concentrated at points along a column or distributed along portions of its length, and may be rigid or elastic. Oblique flexural restraints cause coupling between the principal axis deflections and rotations, while eccentric flexural restraints cause coupling between the principal axis deflections and rotations and the twist rotations and warping displacements. The general buckling mode involves simultaneous bending about both principal axes and torsion. This paper discusses the nature of oblique eccentric restraints, summarizes their finite element analysis, presents examples of their effects on the elastic buckling of columns, and demonstrates the design of columns with oblique eccentric restraints.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Institute of Steel Construction (AISC). (1999a). Commentary on the load and resistance factor design specification for structural steel buildings, Chicago.
American Institute of Steel Construction (AISC). (1999b). Load and resistance factor design specification for structural steel buildings, Chicago.
British Standards Institution (BSI). (2000). “Structural use of steelwork in building. Part 1:2000. Code of practice for design in simple and continuous construction: Hot rolled sections.” BS5950, London.
Mathworks Inc. (1995). Student edition of MATLAB, Prentice-Hall, Englewood Cliffs, N.J.
Papangelis, J. P., and Hancock, G. J. (1997). THIN-WALL—Cross-section analysis and finite strip buckling analysis of thin-walled structures, Centre for Advanced Structural Engineering, Univ. of Sydney, Sydney, Australia.
Rasmussen, K. J. R., and Trahair, N. S. (2005). “Exact and approximate solutions for the flexural buckling of columns with oblique rotational end restraints.” Thin-Walled Struct., 43(3), 411–426.
Standards Australia (SA). (1996). “Cold-formed steel structures.” AS/NZS 4600:1996, Sydney, Australia.
Standards Australia (SA). (1998). “Steel structures.” AS 4100-1998, Sydney, Australia.
Timoshenko, S. P., and Gere, J. M. (1961). Theory of elastic stability, 2nd Ed., McGraw-Hill, New York.
Trahair, N. S. (1969). “Restrained elastic beam-columns.” J. Struct. Div. ASCE, 95(12), 2641–2664.
Trahair, N. S. (1993). Flexural-torsional buckling of structures, E&FN Spon, London.
Trahair, N. S., Bradford, M. A., and Nethercot, D. A. (2001). The behaviour and design of steel structures to BS5950, 3rd British Ed., E&FN Spon, London.
Trahair, N. S., and Rasmussen, K. J. R. (2005). “Finite element analysis of the flexural buckling of columns with oblique rotational end restraints.” J. Struct. Eng., 131(3), 481–487.
Vlasov, V. Z. (1961). Thin-walled elastic beams, 2nd Ed., Israel Program for Scientific Translation, Jerusalem.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Nov 16, 2004
Accepted: Feb 28, 2005
Published online: Nov 1, 2005
Published in print: Nov 2005
Notes
Note. Associate Editor: Jin-Guang Teng
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.