Investigation of Infill Panels Made from Engineered Cementitious Composites for Seismic Strengthening and Retrofit
Publication: Journal of Structural Engineering
Volume 131, Issue 11
Abstract
An infill system for frame structures has been developed as a retrofit strategy for critical facilities. The system uses precast panels made with an engineered cementitious composite (ECC) material in lieu of a traditional reinforced concrete or masonry. The ECC material is advantageous due to the increased tensile strain capacity and compressive toughness of the material relative to traditional materials. Finite element simulations were performed to identify promising infill geometries. A series of structural scale tests was developed from the simulation results. The results from a series of single panel tests are presented. Testing results indicated that different levels of panel strength and stiffness can be achieved by varying the mix design of the ECC material and the amount of reinforcement in the panels. The panel test results combined with the simulation results demonstrate the potential of the infill system as a retrofit.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research is sponsored by the Multidisciplinary Center for Earthquake Engineering Research (MCEER) in Buffalo, N.Y. MCEER is an Earthquake Engineering Research Center under the Engineering Research Centers Program of the National Science Foundation. The PVA fibers used in the panel construction were graciously donated by Kuraray Corp. The opinions in this paper are those of the writers and not necessarily those of the sponsors.
References
Benjamin, J. R., and William, H. A. (1958). “The behavior of one story brick shear walls.” Proc. Am. Soc. Civ. Eng., 84(4), 1254-1–1254-49.
Benjamin, J. R., and William, H. A. (1957). “The behavior of one story reinforced concrete shear walls.” Proc. Am. Soc. Civ. Eng., 83(3), 1723-1–1723-30.
Billington, S. L., and Kesner, K. E. (2001). “Development of ductile cement-based composites for seismic strengthening and retrofit.” Proc., 2nd Int. Conf. on Engineering Materials, JSCE/CSCE, San Jose, Calif.
Billington, S. L., and Yoon, J. K. (2004). “Cyclic response of unbonded posttensioned precast columns with ductile fiber-reinforced concrete.” J. Bridge Eng., 9(4), 353–363.
Douglas, K. S., Billington, S. L., and Kesner, K. E. (2004). “Simplified modeling techniques for a proposed retrofit system using ductile fiber-reinforced cementitious composites.” Proc. 13th World Conf. Earthquake Engineering, Vancouver, B. C., Canada.
Fischer, G., and Li, V. C. (2002). “Effect of matrix ductility on deformation behavior of steel reinforced ECC flexural members under reversed cyclic loading conditions.” ACI Struct. J., 99(6), 781–790.
Frosch, R., Li., W., Jirsa, J., and Kreger, M. (1996). “Retrofit of nonductile moment-resisting frames using precast infill wall panels.” Earthquake Spectra, 12(4), 741–760.
Han, T. S., Feenstra, P. H., and Billington, S. L. (2003). “Simulation of highly ductile fiber-reinforced cement-based composites under cyclic loading.” ACI Struct. J., 100(6), 749–757.
Holmes, M. (1963). “Combined loading on infilled frames.” Proc.-Inst. Civ. Eng., 25, 31–38.
Holmes, M. (1961). “Steel frames with brickwork and concrete infilling.” Proc.-Inst. Civ. Eng., 19, 473–478.
Kahn, L. F., and Hanson, R. D. (1979). “Infilled walls for earthquake strengthening.” J. Struct. Div. ASCE, 105(2), 283–296.
Kanda, T., Watanabe, W., and Li, V. C. (1998). “Application of pseudo strain hardening cementitious composites to shear resistant structural elements.” Proc., Fracture Mechanics of Concrete Structures, FRAMCOS-3, Aedificatio, Freiburg, Germany, 1477–1490.
Kesner, K. E. (2003). “Development of seismic retrofit and strengthening strategies for critical facilities using engineered cementitious composite materials.” PhD dissertation, Cornell Univ., Ithaca, N.Y.
Kesner, K. E., Billington, S. L. (2003). “Experimental response of precast infill panel connections made DFRCC.” J. Adv. Concr. Technol.1(3), 327–334.
Kesner, K. E., Billington, S. L., and Douglas, K. S. (2003). “Cyclic response of highly ductile fiber-reinforced cement-based composites.” ACI Mater. J., 100(5), 381–309.
Li, V. C. (1998). “Engineered cementitious composites–Tailored composites through micromechanical modeling.” Fiber reinforced concrete: present and the future, N. Banthia, A. Bentur, and A. Mufti, eds., Canadian Society for Civil Engineering, Montreal, 64–97.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: May 21, 2004
Accepted: Oct 13, 2004
Published online: Nov 1, 2005
Published in print: Nov 2005
Notes
Note. Associate Editor: Gregory A. MacRae
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.