Effect of Beam Growth on Reinforced Concrete Frames
Publication: Journal of Structural Engineering
Volume 130, Issue 9
Abstract
In well-designed reinforced concrete frames subjected to earthquake shaking, flexural yielding and cracking occur at the ends of the beams as they undergo large lateral displacements. As the cracks form, the horizontal distance between column centerlines increases. This is known as “beam growth” and it causes an increase in member demands that is not generally taken into account in analysis used for building design. This paper describes the mechanism of beam growth, observations of it from previous experimental studies, the development and calibration of analytical models considering and ignoring beam growth, and static and dynamic inelastic frame analyses to quantify beam growth effects. Changes in beam axial forces, beam flexural strength, and column moments and shears are quantified for several frame configurations. It is shown that the column demand due to beam growth tends to be greatest at the first story level and this demand tends to be most severe in frames with deep beams and with many bays. For the four-, eight-, and ten-bay frames used in the study, pushover analyses showed increases in column shear demands due to beam growth of 52, 76, and 86%, respectively. Dynamic loading to design-level earthquake records caused a 23% increase in the four-bay reference frame.
Get full access to this article
View all available purchase options and get full access to this article.
References
Fenwick, R., and Davidson, B. (1995). “Elongation in ductile seismic-resistant reinforced concrete frames.” Proc., Tom Paulay Symp., Farmington Hills, Mich., American Concrete Institute, SP 157-7, 143–170.
Fenwick, R., and Fong, A. (1979). “The behavior of reinforced concrete beams under cyclic loading.” Research Rep. No. 176, Dept. of Civil Engineering, Univ. of Auckland, Auckland, New Zealand.
Fenwick, R. C., and Megget, L. M.(1993). “Elongation and load deflection characteristics of reinforced concrete members containing plastic hinges.” Bull. NZ National Soc. Earthquake Eng., 26(1), 28–41.
International Conference of Building Officials (ICBO). (1997). Uniform building code, Whittier, Calif.
Kim, J. (2002). “Behavior of hybrid frames under seismic loading.” PhD thesis, Univ. of Washington, Seattle.
Lau, D., and Fenwick, R.(2002). “The influence of precast prestressed flooring components on the seismic performance of reinforced concrete perimeter frames.” SESOC J., 14(2), 17–26.
McBride, A. P., Fenwick, R. C., and Davidson, B. J. (1996). “The influence of slabs on the lateral cyclic behaviour of ductile concrete frames.” Research Rep. No. 566, School of Engineering, Univ. of Auckland, Auckland, New Zealand.
Paulay, T. (2000). “A review of some structural principles relevant to a seismic design strategy for ductile systems.” Presented to the Canterbury Structures Group, New Zealand.
Paulay, T., and Priestley, M. J. N. (1992). Seismic design of reinforced concrete and masonry buildings, Wiley, New York.
Prakash, V., Powell, G. H., and Campbell, S. (1993). “DRAIN-2DX base program description and user guide: Version 1.10.” Rep. No. UCB/SEMM-93/17&18, Dept. of Civil Engineering, Univ. of California, Berkeley, Calif.
Priestley, M. J. N., and Kowalsky, M. J.(2000). “Direct displacement-based seismic design of concrete buildings.” Bull. NZ Soc. Earthquake Eng., 33(4), 421–444.
Priestley, M. J. N., Seible, F., and Calvi, G. M. (1996). Seismic design and retrofit of bridges, Wiley, New York.
Qi, X., and Pantazopoulou, S. J.(1991). “Response of RC frame under lateral loads.” J. Struct. Eng., 117(4), 1167–1188.
Restrepo-Posada, J. I., Park, R., and Buchanan, A. H. (1993). “Behaviour of connections between precast concrete elements.” Civil Engineering Research Rep. No. 93-3, Univ. of Canterbury, Canterbury, New Zealand.
Sakata, H., and Wada, A. (1992). “Elasto-plastic behavior of one-twentieth scale RC frame.” Proc., 10th World Conf. Earthquake Engineering, Vol. 6, Balkema, Rotterdam, The Netherlands, 3335–3340.
Somerville, P. G. (1997). “Development of ground motion time histories for phase 2 of the FEMA/SAC steel project.” Technical Rep. SAC (Series) No. BD-97/04, SAC Joint Venture, Sacramento, Calif.
Zerbe, H. E., and Durrani, A. J.(1989). “Seismic response of connections in two-bay R/C frame subassemblies.” J. Struct. Eng., 115(11), 2829–2844.
Zerbe, H. E., and Durrani, A. J.(1990). “Seismic response of connections in two-bay reinforced concrete frame subassemblies with a floor slab.” ACI Struct. J., 87(4), 406–415.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Dec 2, 2002
Accepted: Sep 23, 2003
Published online: Aug 16, 2004
Published in print: Sep 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.