Finite-Element Model for Wood-Based Floors with Lateral Reinforcements
Publication: Journal of Structural Engineering
Volume 130, Issue 7
Abstract
Lateral reinforcements can enhance serviceability of wood-based floor systems. However, because of a lack of proper analysis models, the benefit from installing these components has not been fully recognized in floor design. In this paper, a finite-element model for predicting static and dynamic characteristics of wood-based floor structures with various types of lateral reinforcements is presented. In this model, shell elements were employed to represent floor decking and ceiling, and beam elements were utilized to model joists and structural members in the lateral reinforcements. Special connector elements were developed to model the fasteners connecting various structural components. Other structural features, such as gaps perpendicular to joists in the subfloor, additional objects on floor and flexible supports, were also considered. A computer model incorporating these new features has been developed. For verification and validation purposes, the predicted deflections and natural frequencies for a number of full-size floors were compared with experimental values. Good agreement has been observed. These numerical test results indicated that the present finite-element model is reliable and unique, particularly in modeling floors with lateral reinforcements.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmad, S., Irons, B. M., and Zienkiewicz, O. C.(1970). “Analysis of thick and thin shell structures by curved finite elements.” Int. J. Numer. Methods Eng., 2, 419–451.
Beattie, G. J. (1998). “The vibration performance of timber floors.” Study Rep. No. 79, Branz–the Resource Center for Building Excellence, Auckland, New Zealand.
Berkoh, F. O. (1997). “Occupant-induced vibration in wood floors: A serviceability approach.” PhD thesis, Carleton Univ., Ottawa.
Chui, Y. H. (1987). “Vibration performance of wooden floors in domestic dwellings.” PhD thesis, Brighton Polytechnic, Brighton, U.K.
Chui, Y. H.(1991). “Simultaneous evaluation of bending and shear moduli of wood and the influence of knots on these parameters.” Wood Sci. Technol., 25(2), 125–134.
Dvorkin, E. N., and Bathe, K. J.(1984). “A continuum mechanics based four-node shell element for general nonlinear analysis.” Eng. Comput., 1, 77–88.
Filiatrault, A., Folz, B., and Foschi, R. O.(1990). “Finite-strip free-vibration analysis of wood floors.” J. Struct. Eng., 116(8), 2127–2142.
Folz, B., and Foschi, R. O.(1991). “Coupled vibrational response of floor system with occupants.” J. Eng. Mech., 117(4), 872–892.
Foschi, R. O.(1982). “Structural analysis of wood floor systems.” J. Struct. Div. ASCE, 108(7), 1557–1574.
Foschi, R. O., and Gupta, A.(1987). “Reliability of floors under impact vibration.” Can. J. Civ. Eng., 14(5), 683–689.
Gupta, A. (1985). “Reliability of floors under impact vibration.” MSc thesis, Univ. of British Colombia, Vancouver, B.C., Canada.
Hu, L. J. (1992). “Prediction of vibration responses of ribbed plates by modal synthesis.” PhD thesis, Univ. of New Brunswick, Fredericton, N.B., Canada.
Hu, L. J. (1998). “Appendix: Protocols for field testing of wood-based floor systems.” Rep. No. 3 on Serviceability Design Criteria for Commercial and Multi-family Floors, Forintek Canada Corp., Sainte-Foy, Que., Canada.
Martec Limited. (2000). Vibration and strength analysis program (VAST) user’s manual, Halifax, Nova Scotia, Canada.
McCutcheon, W. J. (1977). “Method for predicting the stiffness of wood-joist floor systems with partial composite action.” Research Paper No. 289, Forest Products Laboratory, USDA Forest Service, Madison, Wis.
Mohammad, M. (1996). “Stiffness responses of nailed OSB-to-lumber connections: Influence of moisture conditioning and load cycling.” PhD thesis, Univ. of New Brunswick, Fredericton, N.B., Canada.
National Research Council (NRC). (1995). “National Building Code of Canada.” Ottawa.
Ni, C. (1997). “Behavior of nailed timer joints under reversed cyclic load.” PhD thesis, Univ. of New Brunswick, Fredericton, N.B., Canada.
Onysko, D. M. (1981). “Deflection of floors under concentrated loadings.” Rep. of Project No. 12, Canadian Forest Service, Forintek Canada Corp., Ottawa.
Przemieniecki, J. S. (1968). Theory of matrix structural analysis, McGraw-Hill, New York, 74–74.
Smith, I.(1980). “Series type solutions for built-up timber beams with semi-rigid connections.” Proc. Inst. Civ. Eng., Struct. Build., 2(69), 707–719.
Stieda, C. K. A. (1990). “The lateral resistance of nailed plywood-to-wood connections.” Rep. Prepared for Project VP-X-177, Forintek Canada Corp., Vancouver, B.C., Canada.
Thompson, E. G., Goodman, J. R., and Vanderbilt, M. D.(1975). “Finite element analysis of layered wood systems.” J. Struct. Div., ASCE, 101(12), 2659–2672.
Vermeyden, P. (1968). “Research into the load sharing action of the decking of a wooden floor in concentrated load.” Rep. of Translation No. 41, Dept. of Fisheries and Forestry, Eastern Forest Products Laboratory, Ottawa (in Dutch).
Young, W. C., and Budynas, R. G. (2002). Roark’s formulas for stress and strain, McGraw-Hill, New York, 166–167.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: May 20, 2002
Accepted: Sep 10, 2003
Published online: Jun 15, 2004
Published in print: Jul 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.