Behavior of Torsionally Coupled Structures with Variable Frequency Pendulum Isolator
Publication: Journal of Structural Engineering
Volume 130, Issue 7
Abstract
The essential characteristics of an effective base isolation system are isolation, energy dissipation, and restoring mechanism. Some friction type base isolation systems proposed earlier have been found to be very effective in reducing the structural response and incorporate simple restoring mechanisms through gravity. However these isolators are effective only under certain excitation and structural characteristics. To overcome these limitations the authors have recently developed a new isolation system called the variable frequency pendulum isolator (VFPI) that has been found to be very effective under a variety of structure and excitation characteristics. In this paper, the mathematical formulation for the three dimensional behavior of an asymmetric structure isolated by a sliding type isolator, with particular reference to VFPI has been presented. The behavior of torsionally coupled structure isolated by VFPI has been examined. The factors affecting the torsional coupling of isolated structure have been identified. The behavior of structure isolated by VFPI has been compared with the structure isolated by other type of friction isolators such as friction pendulum system and pure-friction system.
Get full access to this article
View all available purchase options and get full access to this article.
References
Buckle, I. G., and Mayes, R. L.(1990). “Seismic isolation: History, application and performance—a world view.” Earthquake Spectra, 6(2), 161–201.
Chopra, A. K. (2000). Dynamics of structures: Theory and applications to earthquake engineering, 2nd Ed., Prentice–Hall, Upper Saddle River, N.J.
Goel, R. K., and Chopra, A. K.(1990). “Inelastic seismic response of one-story asymmetric-plan systems: Effect of stiffness and strength distribution.” Earthquake Eng. Struct. Dyn., 19(7), 949–970.
Jangid, R. S., and Datta, T. K.(1994). “Nonlinear response of torsionally coupled base isolated structure.” J. Struct. Eng., 120(1), 1–22.
Kelly, J. M.(1986). “Aseismic base isolation: Review and bibliography.” Soil Dyn. Earthquake Eng., 5(4), 202–216.
Kelly, J. M. (1993a). Earthquake resistant design with rubber, Springer, London.
Kelly, J. M. (1993b). “State-of-the-art and state-of-the-practice in base isolation.” Proc., ATC-17-1 Seminar on Seismic Isolation, Passive Energy Dissipation, and Active Control; Volume 1: Seismic Isolation Systems, Applied Technology Council, Redwood City, Calif. 9–28.
Lee, D. M.(1980). “Base isolation for torsional reduction in asymmetric structures under earthquake loading.” Earthquake Eng. Struct. Dyn., 8(4), 349–359.
Mostaghel, N., and Tanbakuchi, J.(1983). “Response of sliding structures to earthquake support motion.” Earthquake Eng. Struct. Dyn., 11(6), 729–748.
Naeim, F., and Kelly, J. M. (1999). Design of seismic isolated structures: From theory to practice, Wiley, New York.
Nagarajaiah, S., Reinhorn, A. M., and Constantinou, M. C.(1993). “Torsional coupling in sliding base-isolated structures.” J. Struct. Eng., 119(1), 130–149.
Pan, T. C., and Kelly, J. M.(1983). “Seismic response of torsionally coupled base-isolated structures.” Earthquake Eng. Struct. Dyn., 11(6), 749–770.
Pranesh, M. (2000). “VFPI: An innovative device for aseismic design.” Ph.D. thesis, Indian Institute of Technology, Bombay, India.
Pranesh, M., and Sinha, R. (2000b). “Aseismic design of tall structures using variable frequency pendulum isolator.” Proc., 12th World Conf. on Earthquake Engineering, Auckland, New Zealand, Paper No. 284.
Pranesh, M., and Sinha, R.(2000a). “VFPI: An isolation device for aseismic design.” Earthquake Eng. Struct. Dyn., 29(5), 603–627.
Pranesh, M., and Sinha, R.(2002). “Earthquake resistant design of structures using the variable frequency pendulum isolator.” J. Struct. Eng., 128(7), 870–880.
Singh, M. P., and Suarez, L. E.(1992). “Dynamic condensation with synthesis of substructure eigenproperties.” J. Sound Vib., 159(1), 139–155.
Sinha, R., and Pranesh, M. (1998). “FPS isolator for structural vibration control.” Proc., Int. Conf. on Theoretical, Applied, Computational, and Experimental Mechanics (CD), IIT, Kharagpur, India.
Sinha, R., and Pranesh, M. (2001). “Earthquake resistant design of torsionally coupled structures using VFPI.” Structures 2001 Conf.: 2001 Structures Congress and Exposition Structural Engineering Odyssey, Washington D.C.
Zayas, V. A., Low, S. S., and Mahin, S. A. (1987). “The FPS earthquake resisting system: Experimental report.” Rep. No. UCB/EERC-87/01, Earthquake Engineering Research Center, Univ. of California, Berkeley, Calif.
Zayas, V. A., Low, S. S., and Mahin, S. A.(1990). “A simple pendulum technique for achieving seismic isolation.” Earthquake Spectra, 6(2), 317–333.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Apr 26, 2002
Accepted: Aug 18, 2003
Published online: Jun 15, 2004
Published in print: Jul 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.