Finite-Element Model for Collapse and Long-Term Analysis of Steel–Concrete Composite Beams
Publication: Journal of Structural Engineering
Volume 130, Issue 3
Abstract
This paper concerns the development of a numerical procedure for studying steel–concrete composite beams with regard to both the collapse analysis and long-term behavior at the serviceability limit state. The interaction among different parameters that affect the beam response, i.e., connection flexibility, rheological phenomena of concrete (creep and shrinkage), and nonlinear behavior of component materials (concrete cracking, nonlinear behavior of connection, yield of reinforcement, and yield of steel beam), is adequately considered by a uniaxial finite element model. The creep of concrete is taken into account using Maxwell’s generalized rheological model through a step-by-step time increment procedure. The nonlinear behavior of component materials is considered through a new nonlinear iterative procedure called the “modified secant stiffness method,” particularly effective for this type of problem. Some comparisons with experimental results demonstrate the reliability of the proposed formulation and its capability to predict the real structural behavior in both short-term tests under the collapse load and long-term tests under the service load.
Get full access to this article
View all available purchase options and get full access to this article.
References
Amadio, C., and Fragiacomo, M.(1993). “A finite element model for the study of creep and shrinkage effects in composite beams with deformable shear connection.” Costruzioni Metalliche, 4, 213–228.
Amadio, C., and Fragiacomo, M. (1999). “A finite element model for short and long term analysis of steel–concrete beams in cracked phase.” Proc., 17th C.T.A. Conf., Naples, Italy, 2, 251–260.
Aribert, J. M., and Abdel Aziz, K.(1985). “Calcul des poutres mixtes jusq’à l’etat ultime avec un effet de soulèvement à l’interface Acier–Béton.” Constr. Metallique, 4, 3–36 (in French).
Ayoub, A., and Filippou, F. C.(2000). “Mixed formulation of nonlinear steel–concrete composite beam element.” J. Struct. Eng., 126(3), 371–381.
Bažant, Z. P., and Oh, B. H.(1983). “Crack band theory for fracture of concrete.” Mater. Struct., 16, 155–177.
Bažant, Z. P., Pijaudier-Cabot, G., and Pan, J.(1987). “Ductility, snapback, size effect, and redistribution in softening beams or frames.” J. Struct. Eng., 113(12), 2348–2364.
Bažant, Z. P. (1988). Mathematical modeling of creep and shrinkage of concrete, Wiley, Chichester, U.K.
Betti, R., and Gjelsvik, A.(1996). “Elastic composite beams.” Comput. Struct., 59(3), 437–451.
Bontempi, F., and Malerba, P. G. (1996). “The role of tension stiffening in the numerical analysis of R. C. frame structures.” Proc., 3rd Asian-Pacific Conf. on Comput. Mech., Seoul, Korea.
Comité Euro-International du Béton (CEB). (1993). “CEB-FIP model code 90.” CEB Bull. No. 213/214, Lausanne, Switzerland.
Comité Européen de Normalisation (CEN). (1994). “Eurocode 4: Design of composite steel and concrete structures. Part 1.1, General rules and rules for buildings.” ENV 1994-1-1, Bruxelles, Belgium.
Dall’Asta, A., and Zona, A.(2002). “Nonlinear analysis of composite beams by a displacement approach.” Comput. Struct., 80(27-30), 2217–2228.
Daniels, B. J., and Crisinel, M.(1993). “Composite slab behavior and strength analysis. Part I: Calculation procedure.” J. Struct. Eng., 119(1), 16–35.
Dezi, L., Leoni, G., and Tarantino, A. M.(1995). “Time-dependent analysis of prestressed composite beams.” J. Struct. Eng., 121(4), 621–633.
Gattesco, N. (1997). “Fatigue in stud shear connectors.” Proc., Int. Conf. on Composite Construction—Conventional and Innovative, Innsbruck, Austria, 139–144.
Gattesco, N.(1999). “Analytical modeling of nonlinear behavior of composite beams with deformable connection.” J. Constr. Steel Res., 121(2), 319–327.
Gilbert, R. I., and Bradford, M. A.(1995). “Time-dependent behavior of continuous composite beams at service loads.” J. Struct. Eng., 121(2), 319–327.
Kwak, H.-G., and Seo, Y.-J.(2000). “Long-term behavior of composite girder bridges.” Comput. Struct., 74(5), 583–599.
Johnson, R. P.(1987). “Shrinkage-induced curvature in composite beams with a cracked concrete flange.” Struct. Eng., 65B(4), 72–77.
Johnson, R. P., and Molenstra, N.(1991). “Partial shear connection in composite beams in building.” Proc. Inst. Civ. Eng., Struct. Build., 91(2), 679–704.
Jurkiewiez, B., Destrebecq, J.-F., and Vergne, A.(1999). “Incremental analysis of time-dependent effects in composite structures.” Comput. Struct., 73(1-5), 425–435.
Lacidogna, G. (1994). “Modellazione matematica del comportamento viscoelastico del calcestruzzo.” PhD thesis, Polytechnic of Turin, Italy (in Italian).
Mander, J. B., Priestley, M. J. N., and Park, R.(1988). “Theoretical stress–strain model for confined concrete.” J. Struct. Eng., 114(8), 1804–1826.
Manfredi, G., Fabbrocino, G., and Cosenza, E.(1999). “Modeling of steel–concrete composite beams under negative bending.” J. Eng. Mech., 125(6), 654–662.
Newmark, N. M., Siess, C. P., and Viest, I. M.(1951). “Tests and analysis of composite beams with incomplete interaction.” Proc. Soc. Exp. Stress Anal., 9(1), 75–92.
Ollgard, J. G., Slutter, R. G., and Fischer, J. W.(1971). “Shear strength of stud connectors in lightweight and normal concrete.” AISC Eng. J., 8, 55–64.
Riks, E.(1979). “An incremental approach to the solution of snapping and buckling problems.” Int. J. Solids Struct., 15, 529–551.
Sakr, M. A. E. (1999). “Time-dependent analysis of partially prestressed continuous composite beams.” PhD thesis, Slovak Univ. of Technol., Bratislava, Slovakia.
Salari, M. R., Spaccone, E., Shing, P. B., and Frangopol, D. M.(1998). “Nonlinear analysis of composite beams with deformable shear connectors.” J. Struct. Eng., 124(10), 1148–1158.
Sebastian, W. M., and McConnel, R. E.(2000). “Nonlinear FE analysis of steel–concrete composite structures.” J. Struct. Eng., 126(6), 662–674.
Stevens, N. J., Uzumeri, S. M., Collins, M. P., and Will, G. T.(1991). “Constitutive model for reinforced concrete finite element analysis.” ACI Struct. J., 88(1), 49–59.
Teraskiewicz, J. S. (1967). “Static and fatigue behavior of simply supported and continuous composite beams of steel and concrete.” PhD thesis, Univ. of London, London.
Zienkiewicz, O. C., and Taylor, R. L. (1989). The finite element method, McGraw-Hill, London, 1.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Oct 7, 2002
Accepted: Feb 25, 2003
Published online: Feb 19, 2004
Published in print: Mar 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.