Overview of U.S.–Japan Research on the Seismic Design of Composite Reinforced Concrete and Steel Moment Frame Structures
Publication: Journal of Structural Engineering
Volume 130, Issue 2
Abstract
Extensive research over the past 15 years has led to improved models and criteria for seismic design of composite steel–concrete moment frames and their components. Much of this research has been conducted through the U.S.–Japan Cooperative Research Program on Composite and Hybrid Structures. Research on reinforced concrete and steel moment frame structures includes (a) tests and analyses of over 50 composite beam–column connections, (b) tests and analyses of two composite frames, and (c) performance-based seismic design and simulation studies of prototype composite frame buildings. These projects, together with prior research, demonstrate that composite frames can be designed with seismic deformation capacity and toughness comparable to traditional steel or reinforced concrete construction.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Concrete Institute (ACI). (2002). Building code requirements for structural concrete, ACI-318-02, American Concrete Institute, Farmington Hills, Mich.
Architectural Institute of Japan (AIJ). (1987). “AIJ standards for calculation of steel reinforced concrete structures.” Architectural Institute of Japan, Tokyo (original in Japanese, but English translation available from AIJ).
American Institute of Steel Construction (AISC). (1999). Load and resistance design specification for structural steel buildings, 2nd Ed., American Institute of Steel Construction, Chicago.
American Institute of Steel Construction (AISC). (2002). Seismic provisions for structural steel buildings, American Institute of Steel Construction, Chicago.
American Society of Civil Engineers (ASCE). (1994). “Guidelines for design of joints between steel beams and reinforced concrete columns.” J. Struct. Eng., 120(8), 2330–2357.
Baba, N., and Nishimura, Y. (2000a). “Seismic behavior of RC column to S beam moment frames.” Proc., 12WCEE, Paper Ref. 0352, 6 pp.
Baba, N., and Nishimura, Y. (2000b). “Stress transfer on through beam type steel beam-reinforced concrete column joints.” Proc., 6th ASCCS Int. Conf. on Steel–Concrete Composite Structures, Y. Xiao and S. Mahin, eds., 2, 753–760.
Bracci, J. M., Atahan, A. O., and Kunnath, S. K. (1998). “Analytical modeling of composite SRC structural frame systems.” ACI SP-174, 197–212.
Bracci, J. M., Moore, W. P., Jr., and Bugeja, M. N.(1999). “Seismic design and constructability of RCS special moment frames.” J. Struct. Eng., 125(4), 385–392.
Bugeja, M., Bracci, J. M., and Moore, W. P. (1999). “Seismic behavior of composite moment resisting frame systems.” Tech. Rep. No. CBDC-99-01, Dept. of Civil Eng., Texas A & M Univ., 193 pp.
Bugeja, M., Bracci, J. M., and Moore, W. P.(2000). “Seismic behavior of composite RCS frame systems.” J. Struct. Eng., 126(4), 429–436.
Building Codes and Standards (BCS). (1998). “Compilation based on data base on RCJ joint.” Sakaguchi, N., Yoshimatu, K., Masuda, Y., Iizuka, S., and Miyano, Y., Presentation at 5th JTCC Meeting of the U.S.–Japan Program.
Chou, C. C., and Uang, C. M.(2002). “Cyclic performance of a type of steel beam to steel-encased reinforced concrete column moment connection.” JCSR, 58(5-8), 637–663.
Deierlein, G. G.(2000). “New provisions for the seismic design of composite structures.” Earthquake Spectra, 16(1), 163–178.
Deierlein, G. G., Sheikh, T. M., Yura, J. A., and Jirsa, J. O.(1989). “Beam–column moment connections for composite frames: Part 2.” J. Struct. Eng., 115(11), 2877–2896.
Esche, C. D., Bracci, J. M., and Moore, W. P. (1999). “Joint strength in RCS frames.” Tech. Rep. No. CBDC-99-02, Dept. of Civil Eng., Texas A & M Univ., 131 pp.
Griffis, L. G. (1992). “Composite frame construction.” Constructional steel design—An Int. guide, P. Dowling, J. Harding, and R. Bjorhovde, eds., Elsevier Applied Science, New York, 523–554.
International Code Council (ICC). (2000). International building code, International Code Council, BOCA, Country Club Hills, Ill.
Kanno, R., and Deierlein, G. G. (1993). “Strength, deformation, seismic resistance of joints between steel beams and reinforced concrete columns.” Struct. Eng. Rep. No. 93-6, Cornell Univ., Ithaca, N.Y.
Kanno, R., and Deierlein, G. G. (1997). “Seismic behavior of composite (RCS) beam–column joint subassemblies.” Composite construction in steel and concrete III, ASCE, New York, 236–249.
Kanno, R., and Deierlein, G. G. (2002). “Design model of joints for RCS frames.” Composite Construction in Steel and Concrete IV, ASCE Reston, Va., 947–958.
Kuramoto, H. (1996). “Seismic resistance of through column type connections for composite RCS systems.” Proc., 11 WCEE, Paper No. 1755, Elsevier Science.
Kuramoto, H., and Nishiyama, I. (2000). “Equivalent damping factor of composite RCS frames.” SP 196-6, ACI, Farmington Hills, Mich., 109–123.
Kuramoto, H., and Nishiyama, I.(2004). “Seismic performance and stress transferring mechanism of through-column-type joints for composite reinforced concrete and steel frames.” J. Struct. Eng., 130(2), 352–360.
Kuramoto, H., and Noguchi, H. (1997). “An overview of Japanese research on RCS systems.” Proc., ASCE Structures Congress XV, ASCE, Reston, Va., 716–720.
Liang, X., and Parra-Montesinos, G. J.(2004). “Seismic behavior of reinforced concrete column-steel beam subassemblies and frame systems.” J. Struct. Eng., 130(2), 310–319.
Mehanny, S. S. F., Cordova, P., and Deierlein, G. G. (2002). “Seismic design of composite moment frame buildings—Case studies and code implications.” Composite Construction in Steel and Concrete IV, ASCE, Reston, Va., 551–563.
Mehanny, S. S. F., and Deierlein, G. G.(2001). “Seismic damage and collapse assessment of composite moment frames.” J. Struct. Eng., 127(9), 1045–1053.
Nishiyama, I., Itadani, H., and Sugihiro, K. (1998). “Bidirectional seismic response of reinforced concrete column and structural steel beam subassemblies.” Proc., Struct. Engineers World Congress, ASCE, Reston, Va., Paper Ref. T177-2, 8 pp.
Nishiyama, I., Kuramoto, H., Itadani, H., and Sugihiro, K. (2000). “Bidirectional behavior of interior, exterior, and corner joints of RCS system.” Proc., 12 WCEE, Paper No. 1911/6/A, 8 pp.
Nishiyama, I., Kuramoto, H., and Noguchi, H.(2004). “Guidelines: Seismic design of composite reinforced concrete and steel buildings.” J. Struct. Eng., 130(2), 336–342.
Noguchi, H., and Kim, K. (1997). “Analysis of beam–column joints in hybrid structures.” Proc., ASCE Structures Congress XV, ASCE, Reston, Va., 726–730.
Noguchi, H., and Kim, K. (1998). “Shear strength of beam-to-column connections in RCS system.” Proc., Struct. Engineers World Congress, ASCE, Reston, Va., Paper Ref. T177-3, 7 pp.
Noguchi, H., and Uchida, K.(2004). “Finite element method analysis of hybrid structural frames with reinforced concrete columns and steel beams.” J. Struct. Eng., 130(2), 328–335.
Parra-Montesinos, G., Liang, X., and Wight, J. K.(2003). “Towards deformation-based capacity design of RCS beam–column connections.” Eng. Struct., 25(5), 681–690.
Parra-Montesinos, G., and Wight, J. K. (2000a). “Seismic behavior, strength, and retrofit of exterior RC column-to-steel beam connections.” UMCEE 00-09, Dept. of CEE, Univ. of Michigan.
Parra-Montesinos, G., and Wight, J. K.(2000b). “Seismic response of exterior RC column-to-steel beam connections.” J. Struct. Eng., 126(10), 1113–1121.
Parra-Montesinos, G., and Wight, J. K.(2001a). “Modeling shear behavior of hybrid RCS beam–column connections.” J. Struct. Eng., 127(1), 3–11.
Parra-Montesinos, G., and Wight, J. K.(2001b). “Seismic repair of hybrid RCS beam–column connections.” ACI Struct. J., 98(5), 762–770.
Sheikh, T. M., Deierlein, G. G., Yura, J. A., and Jirsa, J. O.(1989). “Beam–column moment connections for composite frames: Part 1.” J. Struct. Eng., 115(11), 2858–2876.
Yamanouchi, H., Nishiyama, I., and Kobayashi, J. (1998). “Development and usage of composite and hybrid building structure in Japan.” ACI SP-174, 151–174.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Sep 24, 2002
Accepted: Aug 25, 2003
Published online: Jan 16, 2004
Published in print: Feb 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.