Computer Modeling of Restrained Reinforced Concrete Slabs in Fire Conditions
Publication: Journal of Structural Engineering
Volume 130, Issue 12
Abstract
This paper describes the computer modeling of axially restrained, one-way reinforced concrete slabs in fire conditions. The study was carried out for slabs with pin supports and slabs with rotationally restrained supports. A single span, 5 m slab, carrying a uniformly distributed load was analyzed using a special purpose, nonlinear finite element program, SAFIR. The study for pin-supported slabs considered the effects of the position of the thrust force at the supports and different axial restraint stiffnesses. The effects of axial restraint on slabs with rotationally restrained supports were also investigated. The analyses found that the behavior of pin-supported slabs is very sensitive to the position of the thrust force at the end supports and the axial restraint stiffnesses. Slabs with rotationally restrained supports are predicted to have much better fire resistance than equivalent pin-supported slabs due to moment redistribution. The behavior of rotationally restrained slabs in fire conditions is less sensitive to the different axial restraint stiffnesses than pin supported slabs.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Anderberg, Y. ( 1978). “Fire-exposed hyperstatic concrete structures: An experimental and theoretical study.” Analytical design of fire exposed concrete structure, Bull. No. 65, Y. Anderberg, S. E. Magnusson, S. Thelandersson, O. Petterson, and U. Wickström, eds., Lund Institute of Technology, Lund, Sweden.
2.
Anderberg, Y., and Forsen, N.E. ( 1982). “Fire resistance of concrete structures.” Division of Structural Mechanics and Concrete Construction, Lund Institute of Technology, Lund, Sweden.
3.
ASTM. ( 1999). “Standard test methods for fire tests of building construction and materials.” E119-98, American Society for Testing and Materials. Philadelphia.
4.
Buchanan, A.H. ( 2001). Structural design for fire safety, Wiley, U.K.
5.
Carlson, C.C., Selvaggio, S.L., and Gustaferro, A.H. ( 1965). “A review of studies of the effects of restraint on the fire resistance of prestressed concrete.” Proc. Symp. on Fire Resistance of Prestressed Concrete, International Federation for Prestressing (F.I.P.), Germany. (Reprinted as PCA Research Dept. Bull. No. 206.)
6.
Cooke, G.M. E. ( 1993). “Results of tests on end-restrained reinforced concrete floor strips exposed to standard fires.” Report prepared for the Construction Directorate of the Department of the Environment, Fire Research Station, Hertfordshire, U.K.
7.
Concrete Reinforcing Steel Institute (CRSI). (1980). Reinforced concrete fire resistance, Concrete Reinforcing Steel Institute, Chicago.
8.
European Committee for Standardization (EC2. ( 1995). “Eurocode 2: Design of concrete structures.” ENV 1992: Part 1-2: General rules- Structural fire design,” European Committee for Standardization, Brussels.
9.
Fleischmann, C., and Buchanan, A. ( 2002). “Analytical methods for determining fire resistance of concrete members.” The SFPE handbook of fire protection engineering, 3rd Ed. P. J. DiNenno, ed., National Fire Protection Association, Mass., 4-239–4-256.
10.
Franssen, J.M. ( 2003). “SAFIR: A thermal/structural program modelling structures under fire.” Proc., North American Steel Construction Conf., American Institute of Steel Construction, Baltimore.
11.
Gustaferro, A., and Martin, L.D. ( 1989). Design for fire resistance of precast prestressed concrete, 2nd Ed., Prestressed Concrete Institute, Ill.
12.
Harmathy, T.Z. ( 1993). Fire safety design and concrete, Concrete Design and Construction Series, Longman Group Limited, U.K.
13.
Issen, L. A., Gustaferro, A. H., and Carlson, C. C. ( 1970). “Fire tests of concrete members: An improved method for estimating thermal restraint forces.” Fire Test Performance, ASTM, STP 464, American Society for Testing and Materials, Philadelphia, 153–185.
14.
Lim, L. ( 2003). “Membrane action in fire exposed concrete floor systems.” PhD thesis, Univ. of Canterbury, New Zealand.
15.
Selvaggio, S. L., and Carlson, C. C. ( 1963). “Effect of restraint on fire resistance of prestressed concrete.” American Society for Testing and Materials, STP 344, ASTM, Philadelphia, 1–25. (Reprinted as PCA Research Dept. Bull. 164.)
16.
Underwriters Laboratories (UL. (1999). Fire resistance directory, Underwriters Laboratories, Northbrook, Ill.
Information & Authors
Information
Published In
Copyright
Copyright © ASCE.
History
Published online: Nov 15, 2004
Published in print: Dec 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.