Lifetime Performance Analysis of Existing Steel Girder Bridge Superstructures
Publication: Journal of Structural Engineering
Volume 130, Issue 12
Abstract
A general method for lifetime performance analysis of existing steel girder bridges is presented. Only the superstructure components are considered. The formulation is established by identifying four distinct categories: limit state equations, random variables, deterministic parameters, and constant coefficients. The limit state equations are derived by strictly adhering to the load and capacity formulas and requirements set forth in AASHTO specifications. Generality is pursued by establishing parametric limit state equations such that the formulas are applicable to any type of steel bridge having similar superstructure components. The application of the developed formulation to lifetime performance analysis of four steel girder bridges located in an existing bridge network in Colorado is also presented. Performance analysis results are presented in two main categories: initial reliability indices and lifetime reliability profiles. Once the values associated with random variables, deterministic parameters, and constant coefficients are assigned, component reliability indices for the slab and the girders are calculated for each bridge. Detailed results are presented for an individual bridge and the lifetime reliability profiles are presented for two bridges. For time-variant performance analysis, special emphasis is placed on the corrosion penetration modeling in the girders. An attempt has been made to adopt such models to the atmospheric and environmental conditions of Colorado. Limitations to such an approach are also described. The focus of the paper is on the formulation and the overall methodology rather than the analysis of the results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akgül, F. ( 2002). “Lifetime system reliability prediction for multiple structure types in a bridge network.” PhD thesis, Department of Civil Engineering, University of Colorado, Boulder, Colo.
2.
Akgül, F., and Frangopol, D. M. (2003). “Rating and reliability of existing bridges in a network.” J. Bridge Eng., 8(6), 383–393.
3.
Akgül, F., and Frangopol, D. M. (2004). “Computational platform for predicting lifetime system reliability profiles for different structure types in a network.” J. Comput. Civ. Eng., 18(2), 92–104.
4.
Albrecht, P., and Naeemi, A.H. ( 1984). “Performance of weathering steel in bridges.” NCHRP Rep. 272, National Cooperative Highway Research Program, Transportation Research Board, Washington, D. C.
5.
American Association of State Highway and Transportation Officials (AASHTO). (1996). Standard specifications for highway bridges, AASHTO 16th Ed., Washington, D.C.
6.
Ang, A.H-S., and Tang, W.H. ( 1984). Probability concepts in engineering planning and design, Vol. II, Decision, Risk, and Reliability, Wiley, New York.
7.
Colorado Department of Public Health and Environment (CDPHE). (2001). Report to the Public, 2000-2001, Colorado Air Quality Control Commission, Air Pollution Control Division, Denver, Colo. 12.
8.
Estes, A.C. ( 1997). “A system reliability approach to the lifetime optimization of inspection and repair of highway bridges.” PhD thesis, Department of Civil Engineering, Univerisity of Colorado, Boulder, Colo.
9.
Estes, A. C., and Frangopol, D. M. (1999). “Repair optimization of highway bridges using system reliabilty approach.” J. Struct. Eng., 125(7), 766–775.
10.
International Standards Organization (ISO). ( 1992). “Corrosion of metals and alloys-Classification of corrosivity of atmospheres.” ISO 9223, Geneva.
11.
McCuen, R. H., and Albrecht, P. ( 1995). “Composite modeling of atmospheric corrosion penetration data.” Application of accelerated corrosion tests to service life prediction of materials, ASTM STP 1194, Philadephia, 65–102.
12.
Morcillo, M., Simancas, J., and Feliu, S. ( 1995). “Long-term atmospheric corrosion in Spain: Results after 13-16 years of exposure and comparison with worldwide data.” Atmospheric corrosion, ASTM STP 1239, Philadelphia, 195–214.
13.
Stahl, D., McCoy, J.K., and McCright, R.D. ( 1995). “Impart of thermal loading on waste package material performance.” Scientific basis of nuclear waste management, XVIII, Symposium, Kyoto, Japan, 353, 671–678.
14.
Texas Department of Transportation (TxDOT). (2001) Bridge design manual, Austin, Tex.
15.
Townsend, H. E., and Zoccola, J. C. ( 1982). “Eight-year atmospheric corrosion performance of weathering steel in industrial, rural and marine environments.” Atmospheric corrosion of metals, ASTM STP 767, Philadephia, 45–59.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 ASCE.
History
Published online: Nov 15, 2004
Published in print: Dec 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.